Renovation of VOF

1. Carefully dismantling and removing of existing mosaic flooring/ Kota stone / ceramic tile or any other flooring / skirting, sunken fillings such as cinder filling / brick bat coba / dado, etc. from bathroom, toilet or wherever required including disposing off debris out of Bank's premises at approved dumping ground of local administration, including all lead and lift etc. all complete as directed by Bank’s Engineer. Note:- This item will be operated in dressing area, bathrooms, wash basin area and toilets. a) Carefully dismantling of Entrance wall, toilet, wash basin area and bathroom (approximate area = 9 Sqm.) b) Carefully dismantling all plumbing & sanitary fittings. Looking mirror, geyser, G.I. pipeline, existing flushing cistern including flush pipe, brackets, W.C. seat, wash basin with brackets, C.P./ Brass fittings, etc. from one flat. c) Dismantling of skirting: Carefully dismantling all the existing tile/stone skirting with backing mortar in the flat and balcony. d) Taking out door shutter of dressing area, bathroom & toilet with doorframe, 01 window of toilet & dressing area with window frame & grills including stone/brick masonry walls including cement plaster. e) Dismantling of existing masonry wall including cement plaster in dressing area & toilet area. Approx. qty. 3.50 Sqm. Work includes disposal of debris out of Bank premises, considering the salvage value of dismantled material, making good the damages with cement mortar 1:4 (1 cement : 4 sand) or plain cement concrete 1:2:4 (1 cement : 2 sand : 4 stone chips 20 mm. nominal sie) as directed by Bank's Engineer.

2. Providing and laying brick work of required thickness with best quality locally available brick in cement mortar 1:6 (1 cement: 6 coarse sand) including racking out joints, scaffolding, curing for partition walls, support walls of washbasin & platform of urinals, etc. all complete as directed by Bank's Engineer.

3. Providing and constructing half brick wall in cement mortar 1:4 (1 Cement: 4 coarse sand) at all levels, using best quality locally available bricks including providing key with adjoining stone/brick masonry wall, as per site requirement including racking out joints, curing etc., all complete as directed by Bank's Engineer.

4. Providing and applying plain cement plaster in 20 mm. thick in cement mortar 1:4 (1 cement: 4 coarse sand) or level to be match with surrounding area and both faces of walls including scaffolding, curing, etc. all complete as directed by Bank’s Engineer.

5. Providing and applying polymer based two compound water proofing treatment to the sunken portion of the toilets, etc. by using products of M/s. Pidilite, M/s. Fosroc, M/s. Sika, M/s. BASF, M/s. MC-Bouchemie or any other equivalent in the following steps: - a) Thoroughly cleaning of all surfaces of sunken portions to be treated. b) Grouting and injecting polymer cement slurry as per manufacturer’s specifications into the R.C.C. members till its refusal. c) Repairing the damaged portions of the R.C.C. members with polymer concrete / mortar as per manufacturer’s specifications. d) Providing and applying 20 mm. thick water proofing cement plaster 1:4 (I cement: 4 coarse sand) mixed with water proofing compound as per manufacturer’s specifications to the sunken floor and sides including rounding off junctions / corners with water proofing cement mortar, etc. all complete. e) Providing and applying a coat of polymer water proofing primer and two coats of two compound based water proofing polymer/ chemical of M/s. Pidilite, M/s. Fosroc, M/s. Sika, M/s. BASF, M/s. MC-Bouchemie or any other equivalent approved make as per manufacturer’s specifications to the sunken floor, sides, etc.; testing the treated surface by ponding method for 72 hours. f) Repeat the treatment till no seepage is observed on the treated surface. g) Providing and laying 15 mm. thick protective layer of plain cement plaster in cement mortar 1:4 (1 cement: 4 coarse sand) over the treated surface. Work also includes making through hole across the stone masonry wall of 200 mm. to 450 mm. thick up of required size for embedding G.I. pipe of 15 mm. diameter in stone masonry for draining out the seepage leakage water, if any, and filling with cement mortar 1:2 (1 cement: 2 coarse sand) including supplying G.I. pipe of 200 mm. to 450 mm. length. Note: - Single measurement of the sunken floor and its sides shall only be considered for payment for all sub items of work.

6. Providing and laying brick bat coba to the sunken floors using best quality locally available well burnt sliced bricks in cement mortar 1: 4 (I cement : 4 coarse sand) mixed with water proofing compound of approved make as per manufacturer's specifications, roughening the top layer of cement mortar / top surface of sunk filling with broom to receive the flooring, etc. all complete as directed by Bank's Engineer. Note: - No deduction for squatting / w.c.pan, C.I. pipes, etc. will be made for measurement purpose.

7. Providing and laying R.C.C. 1:1 ½ :3 (1 cement: 1½ coarse sand : 3 aggregate) for lintel, shelves, platform, slab etc. excluding reinforcements but including compaction, centering, shuttering, curing, finishing, cutting pockets in walls/slab to provide necessary bearing at all height and level, etc. complete all as directed by Bank`s Engineer.

8. Supplying, straightening, cutting, bending, placing in position and binding & tieing with binding wire TMT steel bar grade Fe415 of approved manufacturer in required diameter including cost of 16 SWG binding wire etc. complete all as directed by the Bank`s Engineer.

9. Providing and fixing floor mounted, white/ivory colour vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white/ivory colour vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. (Basic Price = Rs. 12000/- including GST) Make: hindware or approved equivalent Ref.-Model: Dome series

10. Wash Basin (Full pedestal type): Providing and fixing in position White China vitreous first quality Full Pedestal Wash Basin of approved brand/make of approximate size 520x460X855 mm with necessary , 32 mm dia. CP brass waste coupling, 32mm dia C.P. Bottle trap with wall connection pipe and flange, 32mm CPVC pipe conforming to IS 15778 of approximate length 1.00 mt including required fittings/ accessories, providing / making connections from waste coupling to termination over Nahani Trap below, cutting, jointing, wastage, making necessary chases in wall, fixing and concealing pipe in wall , making good all damages to match with the adjoining areas, taking away debris out of Bank’s premises etc. Complete all as directed. ref. Jaquar kubix Basic price of a set of Wash Basin + padestal, shall be Rs.6000.00 including GST.