REPAIR TO SECURITY WALL, PERIODICAL SERVICES OF BOUNDARY WALL, FENCING, DRAIN, PATH AND HARDSTANDING OF ZONE A AREA AT SUNJUWAN UNDER GE JAMMU

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removing from site complete all as specified and directed.

Material and labour for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry in floors using white cement and pigments over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

Material and labour for 75 mm thick plain cement concrete type (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of path complete all as specified and directed.

Material and labour for machine pressed precast cement concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and no pigment laid over and including 25 mm thick sand cushion complete all as specified and directed.

Material and labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm crushed stone aggregates) as in plinth protection, concrete shall be laid in alternate bays not exceeding 3 metre length finished fair and even complete all as specified and directed.

Material and labour for walling of random rubble masonry uncoursed, well bonded, bedded and solidly hearted built in cement mortar (1:4) in wall complete all as specified and directed by Engineer-in-Charge.

Material and labour for walling of random rubble masonry uncoursed, well bonded, bedded and solidly hearted built in cement mortar (1:4) in wall but except stone complete all as specified and directed by Engineer-in-Charge.

Material and labour for flush pointing to random rubble masonry uncoursed or brought upto coursed in CM (1:4) complete all as specified and directed.

Dismantling RCC posts or struts of any description and section embedded in natural ground including taking out embedded portion and making good the disturbed ground surfaces complete all as specified and directed by Engineer-in-Charge.

Excavation in post holes (or similar holes) each not exceeding 0.50 Cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft / loose soil complete all as specified and directed.

Material and labour for rolled steel section as in posts, struts, gate and staples in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting, welding etc and similar work conforming to FE-290 Gde E -165 complete all as specified and directed.

Supply and fixing in repair barbed wire, galvanized steel, 2 strand 2.24 mm dia with 2mm dia barbs at 75mm spacing straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note: - Each line wire to be measured.

Fixing only barbed wire, galvanized steel, 2 strand 2.24 mm dia with 2mm dia barbs at 75mm spacing, straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc. complete all as specified and directed.

Taking down steel gates of any description not exceeding 3.5m length and 3 metre in height and in any position complete all as specified and as directed.

Material and labour for two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of steel surfaces exceeding 10cm width or girth complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. and removing off the rubbish outside of MOD land complete all as specified and directed.

Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar (1:4), surface finished even and fair without using extra cement complete all as specified and directed. (Including all necessary scaffolding, lifting arrangement for external surfaces).

Material and labour for two coats of cement based paint including preparation of newly plastered surfaces complete all as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Material and labour for brick work with sub class "B" bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:4) complete all as specified and directed.

Description all as per serial item no 20.00 here-in-before but except bricks complete all as specified and directed.

Material and labour for PCC type B-2 (using 40mm graded crushed stone aggregates) in surface channel and drains complete all as specified and directed.

Extra for fair finished drain or channel inner girth in cement concrete using extra cement including moulds, mitred / stop ends etc complete all as specified and directed.

Add or deduct for each 25mm girth or part there of under 30cm complete all as specified and as directed.

Supply and fixing precast cement concrete louvres and jallies, 40mm thick (measured solid), including all moulding and set in (1:4) cement mortar complete all as specified and directed.

Supply only mild steel chain link fencing 3 to 4 mm dia of size 75 x 75 mm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rail, straining bolts etc including provision of binding wire complete all as specified and directed.

Material and labour for applying one coat of cement based paint on old plastered surfaces of wall complete all as specified and directed.

Dismantling cast iron work i.e. fencing posts, horns, barbed wire etc in compound wall in any condition and in any position complete all as specified and directed.

Material and labour in repair concertina coil 600mm dia fixed on security wall complete all as specified and directed by Engineer-in-Charge.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - All plumbing works shall be laid or fixed as to be completely air tight or water tight as specified and Contractor will furnish its certificates towards air / water tight before completion of work under the Contract. NOTE NO 4: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

M/S VED PAUL MAHAJAN

M/S CHOUDHARY BUILDERS

M/S TRIKUTA BUILDERS

M/S RAKESH CONSTRUCTION

M/S Raman Construction Co.

M/S BALWAN SINGH

M/S PARAMJEET SINGH

Bidder Name

M/S Raman Construction Co.

M/S VED PAUL MAHAJAN

M/S TRIKUTA BUILDERS

M/S PARAMJEET SINGH

M/S PRITHIVI RAJ AND SONS

M/S CHOUDHARY BUILDERS

M/S RAKESH CONSTRUCTION

M/S BALWAN SINGH