SPL REPAIR TO BLDG NO T 6 AND SPL REPAIR BLDG NO P 154G QUARTER GUARD OF 7 KUMAON AND SANCTION MINOR WORKS UNDER GE EAST LUCKNOW

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. by Engr-in-Charge.

S&F Glazed ceramic tiles in vertical surface 600x300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc including 10 mm thick rendering in CM 1:4 complete all as specified.

S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window-cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and as directed.

M& L for Virified Ceramic tiles double charge/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.42 sqm,n.exc 1 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

All as per above item No 5 but on vertical surfaces including 10mm thick screed plaser in CM 1:4 complete all as specified. complete all as specified and as directed.

M& L for Virified Ceramic tiles double charge/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

All as per above item No 7 but on vertical surfaces including 10mm thick screed plaser in CM 1:4 complete all as specified. complete all as specified and as directed.

Demolition of brick work of any type built in cement mortar etc complete all as specified and as directed.

M & L for brick work with with sub class 'B' old size bricks straight or curved on plan to any radius in half brick thick walls, built in 1:4 CM complete all as specified and as directed.

S&F in repair PVC connection 15 mm dia and 450 mm long with both end brass fly nut complete all as specified and as directed.

S&F in repairs fancy type chromium plated cast copper alloy fancy type bib taps long shank with capstan head & cup 15 mm dia bore complete all as specified and as directed.

Taking up or down GI tubing 15 mm bore pipe and connections including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down GI tubing 20mm bore pipe and connections including cleaning for re-fixing or removal to store complete all as specified and as directed.

S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed.

S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed.

S&F PVC floor trap size 75 mm dia outlet with grating including connection to waste pipe with cement joint including taking down existing trap complete all as specified and as directed .

S&F in repair 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) junction single,(Single T) equal or unequal complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) vent cowl complete all as specified and as directed.

S&F CP grating 125mm dia with waste hole complete all as specified and as directed.

S&F in reapir single lever Basin mixer pillar tap etc complete all as specified and as directed.

S&F in repair 15 mm bore 2-way bib cock with flange etc complete all as specified and as directed.

S&F in repair vitreous china wall hung WC, incl cistern UF seat close seat cover, hinges, accessories set of size 355 x 555 x 370 mm fixed to wall/floor with P/S trap complete all as specified and ditected.

S&F in repair vitreous china table top Wash Hand Basin of size 530 x 420 x 140 mm with bottle trap complete all as per manufacturer's instruction. complete all as specified and as directed.

S&F in repair health faucet (ABS Body) with 1.00 Mtr long flexible tube incl wall hook complete all as specified and directed.

S&F in repair brass CP tubular towel rail of superior quality 20mm dia 60cm long between flanges fancy type complete all as specified and as directed.

S&F in repair chromoium plated box type toilet paper holder fancy complete all as specified and as directed.

S&F in repair 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and as directed.

S&F in repair CP angle valve for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair complete all as specified and as directed.

S&F in repair glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and as directed.

Supply & fix in repair sheet glass shelf assembly 600mm consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.complete all as specified and as directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed. Note:- opening of existing wind tie where required for taking down of AC sheet is included)

M & L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws & EPDM washer complete all as specified and as directed.

S&F for prelaminated galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.FE 410 W, E 250 complete all as specified and as directed.

M&L for preparation of new surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified and as directed.

Taking down chowkhats including cutting Hold fast & making good surface or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n.exc 4 Sqm each icluding cutting hold fast and making good suraface complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

S&F IInd class hard wood plain, soild chowkhats and frames wrought,framed rebated on the solid rounded or chamfered put together with glue pined at jints complete all as specified and as directed. at site

S & F of flat iron bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gate, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fast, wall ties, hooks for hanging fans and other similar small steel article conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.

S&F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

S&F Pressed steel frames of size 165 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and complete all as specified and as directed. by Engineer-in-Charge

S&F for 30 mm thick factory made solid panel PVC door shutter both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings asscomplete all as specified and as directed. by Engineer-inCharge.

S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels. Commercial type on both sides including 0.9 mm thick decorative laminate type B-1 both side of surface finish, colour and pattern approved, fixed with approved adhesive, complete all as specified and as directed. by Engr-in-charge.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers; including PU polish with sealer/filler, buffing etc complete over veneer fixed with screws to timber frame work complete all as specified and directed

M & L for 30 mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into four squares/rectangle with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(b) complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint to new un decorated surface over a coat of pink primer to wooden surfaces including preparation, exc 10 cm width or girth, complete all as specified and as directed.

M & L for PCC 1:3:6 type C-1 (20mm thick graded stone agg) as in hold fast block and back filling of PS frame.complete all as specified and as directed.

S&F 150 mm long MS Helical door spring Welded to steel /Fixed to wooden door frame including roller and roller plate etc complete of approved quality.complete all as specified and as directed.

S&F in repair hydraulic door closer aluminium body hydraulically regulated, designation No. 3, universal type, complete all as specified and directed.

S & F door stopper 150 mm size of brass body and tongue with hard drawn steel spring complete all as specified and as directed.

Supply and fixing factory made UPVC laminated three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels made of frame 110 x 45 mm & sash 40 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension comprising of UPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge complete all as specified and directed. (Note-1. Glazed shutters float glass thickness not less than 5.00 mm and wire mesh shutter with Stainless steel (SS-304) wire mesh 0.36 mm dia with aparture 1.4mm shall also be deemed included in quoted rates and No extra payment will be made separalely Note-2. For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F powder coated aluminium window side hung type with double leaf glazed shutter and stainless steel wire mess fixed on frame, with frame as per section No 4729, glass shutter as per section No 4725 and mullion as per section No 4726 of make Jindal or equivalent, with and incl 4 mm thick sheet glass, 0.36mm dia and 1.18mm aperture stainless steel jally (Fixed outside of frame with aluminium beading) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium handle 125 mm-2 , Hinges 100 mm size-4, aluminium tower bolt-2 and peg stay 150 mm complete all as specified and directed

S&F stainless steel Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed.

S&F brass handle ,extruded, fabricated type polished 150mm long.complete all as specified and as directed.

S&F brass sliding door bolt 300mm long with die-cast brass hasp & staple(bolt type) and fixing bolts and sliding bolt with rolled or drawn brass bolt .complete all as specified and as directed.

S&F 200 mm long brass barrel tower bolts with barrel of extruded section.complete all as specified and as directed.

S&F 125mm butt hinges extruded brass with mild steel hinge pin,bright polished and fixed, type B - 11 all as specified.

S&F brass mortise lock of 6 lever complete all as specified and directed

S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified and as directed.

S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified and as directed.

S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and as directed.

S&F 300 mm long aluminium alloy anodised sliding door bolts, with hasp staple (Bolt type) and fixing clips ofsheet cast or extruded sections and fixing bolts and slinding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified and as directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:6 on other than fair face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar in 1:4 on fair face of brick work or concrete surfaces even and smooth without using extra cement.complete all as specified and as directed.

M&L for preparation of new/old plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade over two coat of wall care putty over a coat of primer complete all as specified and as directed.

M & L for preparation of old/new plastered decorated surface of wall and applying two coats of weather proof exterior emulsion paint after filling of interstice of plastered surface with Birla wall care putty over a coat of primer complete all as specified and as directed.

Demolition Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for GI snap grid framework including 4 mm thick E-boards prepainted designer false ceiling (grid size 605 mm x 605 mm ) including necessary notching and prepared holes and hangers 4mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleat made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.50 mm dia 40 mm long complete all as specified and as directed.

M&L for Gypsum board 12 mm thick in ceiling in sunk and raised moulding pattern and design fixed with and including suitable GI grid framework with screw as per manufacturers instruction including necessary notching and prepared holes and hangers 4mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleat made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.50 mm dia 40 mm long compelete all as specifed and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level, complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection/ path laid/sub floor/sub base in panel surface finished even and fair complete all as specified and as directed.

M&L forming contraction (Dummy) joints 65mm deepX10mm wide, filled with sealing compound of grade 'A' and complete all as specified and as directed.

S&F in repair SS curtain rails, 25mm dia with bracket and fancy knobs etc. complete all as specified and as directed. by EIC.

S&F solid PVC wall lining consisting of 5 mm thick single side prelam PVC sheet used instead of plain colour sheet as per specification.complete all as specified and as directed.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drwaing .complete all as specified and as directed.

S&F WPC coloured/prelam louvrs for wall panelling complete all as specified and directed by Engr-in-Charge.

S&F 500 ltrs three layer in white colour capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tanks and removing to store complete all as specified and as directed.

S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) complete all as specified and as directed.

S&F venetian blind of vista brand with horizontal venetian complete of best quality complete all as specified and as directed.by EIC.

Demolition of cement concrete (reinforced) RCC in ground floor and paving n.exc 15 cm thickness below and above ground level, complete all as specified and as directed.

M & L for RCC 1:2:4 type B1 using 20 mm graded aggregate for slabs support on walls beams and columns, in floors roofs landings balconies etc.complete all as specified and as directed.

M & L form work for soffits and sides of suspended slabs such roof slabs, floor slabs, landing and similar works not exceeding 200 mm thick (horizontal or soffits) rough finished surfaces of concrete flat.complete all as specified and as directed.

Ditto all as per above but edges of concrete flats n.exc 10 cm wide.complete all as specified and as directed.

M&L TMT bar 8 to 10mm dia and over, cut to length, bent ot shape required, including cranking, bending , hooking ends and binding with and including mild steel wire(annealed not less than 0.9mm dia) icluding welding,rivetting etc complete all as specified and as directed.

Dismantling of Aluminium partition wall/surface complete all as specified and as directed.

M&L for brick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and as directed.

S&F 10mm thick toughned glass with frosted fillm as in partition/appointment board and similar work including writing logo, letter in any number. with bevelled edge cutting to shape, drilling holes, fixed with 50mm SS sapcer required complete all as specified and as directed.

M&L for in repair block board, 18/19mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work complete all as specified and as directed.

S & F 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas complete all as specified and directed.

S&F 150mm long fancy stainless steel handle for cupboard & wardrobe shutter complete all as specified and as directed by Engr-in-charge

S&F magnet catcher of 50mm size for cabinet shutter complete all as specified and as directed.

S&F continous piano hinges of mild steel, bright finish or electro galvanised with width 30mm of flap .complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in embedding of fencing post/ foundation of manholes etc complete all as specified and as directed.

S&F for mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc,.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Supply only chainlink MS galvanised chain link fencing any mesh size complete all as specified and as directed.

M & L for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed

M&L for cement concrete in foundations filling and mass Concrete 1:2:4 type B-2 (40mm graded aggregate) complete all as specified and as directed.

Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in soft and loose soil complete all as specified and as directed.

M&L for chequred cement concrete tiles 30 cm x 30 cm x 20-22 cm thick set and jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm screed bed in CM 1:6 complete all as specified and as directed.

S&F 5 to 10 mm dia of neck mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n.exc 5 cm long comlete all as specified and directed by Engr-in-Charge.

S&F exterior tiles(Heavy duty) of superior quility 400x400x12MM thick of approved size/design/shade set and jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in cm 1:4 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles tiles in vertical surfaces 600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.

S&F vitrified ceramic tiles dark/light shade digital tiles/(double charged), 10mm thick (square/ rectanglar) polished , exceeding 0.18 sqm of each tiles not exceeding 0.38 sqm, in floors etc. laid over 15mm thick screed bed 1:6 , set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, platform, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforescent salts, trading oil, greasy sopts etc and preparation of plastered surfaces and applying two coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of 2mm thick putty Complete all as specified and directed

Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and as directed.

M&L waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1mm, of Asian Paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and . Sanding of the putty surface with Asian Paints TruCare Wall Sander: L- 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sannding pad of 240 Grit or above having dia of 7"/9" to make the surface free from dust etc. by skilled labour. Step 1) Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer(Trucare Putty mixier with min 1400 W power havinng mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2)Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine(Model: EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" Step 3) Allow 6-8 hrs time to dry the putty surface complete all as specified and as directed..

M&L for one coat of acrylic water based exterior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent quotes as per manufacturer instructions complete all as directed.

M&L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up Resistance of Asian Paints Ltd or its equivalent with low VOC less than 50 , Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint with 8 years performance warranty from Manufacture and instructions complete all as directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plaint colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc complete all as specified and as directed.

S&F butt hinges of size 75mm medium weight, stainless steel marked complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm size aluminium alloy handles, fabricated type, extruded section.complete all as specified and as directed.

S&F powder coated aluminium anodised frame/chowkat of Aluminium door fixed with rawal plug and screw or wire expansion hold fasteners complete all as specified and as directed.

S&F for powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,complete all as specified and as directed. as per requirement and direction of Engineer in-charge

Providing and fixing of E-board 'Everest' or equivalent make 600 x 600 x 4mm thick white prelaminated sett embosed reinforced desigener (lake & HM as approved ceiling board/tiles at all height laid on Armstrong Hot dipped Galvanised imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work will comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level and justers and screws etc.complete all as specified and as directed.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550x400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and as directed.

S&F in repairs vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests including connection to trap, and to flushing pipe, anti syphonage pipe, etc complete making good to floors and complete all as specified and as directed.

S&F in repair 10 Litres capacity PVC valveless syphonic action type flushing cistern low level, white with inlet ball valve float and handle including brackets connection to pipes and fixing of lever if any joint between flushing pipe and socket of WC pan pre-made complete all as specified and as directed.

S&F PVC connection of 15 mm bore 600 mm long with brass coupling on both ends of superior quality all as specified.PTMT nuts fixed as in repair.complete all as specified and as directed.

S&F in repair 15mm dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, scresed down screwed for iron pipe or for brass ferrule and fixed both ends for iron pipe or for unions .complete all as specified and as directed.

S&F in repair fancy type piller taps 15 mm cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered (hot or cold) with long screwed shanks and flynuts screwed for iron pipe and fixed.complete all as specified and as directed.

S&F in repairs CP towel rails 20 mm dia and 600 mm long fixed as in repair incl chromium plated brass screw and wooden / cleats.complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or in floor/wall including taking down complete all as specified and as directed. by Engineer-in-charge.

S&F PVC (SWR) bends any radius of 75 mm dia complete all as specified and as directed.

S&F PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F 15 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down complete all as specified and as directed.

S&F 20 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down complete all as specified and as directed.

S&F stainless steel drapery curtain rods standard quality dia not less than 25mm with fancy type stainless steel latoo at both ends and Stainless Steel Bracket for middle support as required complete all as specified and as directed. and direced as approved by GE.

M&L Cement concrete1:4:8 type D-2 using 40 mm graded stone aggregate in foundations, filling and mass-concrete complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard/dense soil. complete all as specified and as directed

S&F for 150mm internal dia, Salt glazed & Stoneware drain pipe grade 'A' laid in trenches and jointed with cement joints complete all as specified and as directed

M&L For concrete bed to drain pipes of 150 mm dia incl packing under and haunching against the sides of pipes with concrete, after they are laid in cement concrete 1:3:6 type C2 and testing including necessary complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in Coping benching of manholes etc and including necessary formwork complete all as specified and as directed

M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in precast manhole cover and cover slab for septic tanks and including necessary forms and moulds etc and set in cement mortar 1:6 and including demolation of old slab complete all as specified and as directed

M&L TMT 10mm dia and over cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and as directed

M&L for 25 User LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc, complete for 25 User complete all as specified and as directed

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80M dia X 3.00M deep (Ref CE Lko Zone TD 576) complete all as specified and as directed

Taking down carefully copper/aluminium point wiring ( light, fan, socket , bell or power) complete incl. all electrical fittings & fixtures(DBs,submain,cables etc) all as specified and directed by Engineer-in-charge.

Taking down carefully Submain wiring any size complete including all electrical fittings & fixtures etc complete all as specified and as directed.by Engineer-in-charge.

Taking down carefully any Light fittings/fixtures/Ceiling fan/wall fan/Ex fan any size complete including all (electrical fittings & fixtures etc) complete all as specified and as directed. by Engineer-in-charge.

Material and Labour for point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduit with accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP complete all as specified and as directed. Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall all as specified.

All as per Item No 162 here in before but for One 5 A socket outlet on independent Board complete all as specified and as directed.

All as per Item No 162 hereinbefore but for One 5 A socket outlet on same Board complete all as specified and as directed.

All as per Item No 162 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor complete all as specified and as directed.

Supply and fix frame plate with match cover three module complete all as specified and as directed.

All as per item No.166 above but six module complete all as specified and as directed.

All as per item No.166 above but eight module complete all as specified and as directed.

All as per item No.166 above but Twelve module complete all as specified and as directed.

All as per item No.166 above but Eighteen module complete all as specified and as directed.

Supply and fix terminal box suitable three modular plate of size 100X75x50 mm including cutting, grooving and plastering etc. complete all as specified and as directed.

All as item No 171. above but six modular plate of size 210X75x50 mm including cutting, grooving and plastering etc. complete all as specified and as directed.

All as item No 171. above but eight modular plate of including cutting, grooving and plastering etc. complete all as specified and as directed.

All as item No 171. above but Twelve modular plate of including cutting, grooving and plastering etc. complete all as specified and as directed.

All as item No 171. above but Eighteen modular plat of including cutting, grooving and plastering etc. complete all as specified and as directed.

Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified and as directed.

Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified and as directed.

Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module complete all as specified and as directed.

Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module complete all as specified and as directed.

Supply and fix Modular Regulator 230V AC 50 HZ SP two module complete all as specified and as directed.

Supply and fix PVC Ceiling rose complete all as specified and as directed.

Supply and fix TV Socket 1 Module Modular complete all as specified and as directed. by Eng-in-Charge

Supply and fix Telephone socket 1 Module Modular complete all as specified and as directed. by Eng-in-Charge.

Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 20-22W with a nominal system lumen output of 2000-2200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded aluminimum with powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95, complete all as specified and as directed.

Supply and fixing decorative fancy type LED lighting fixture Single brass made bracket with 140mmX78mm rectangular base,210mm length U Shaped brass arm 60 mm dia gallery with 2 pin brass holder tipped with 125mm length MS Powder coated down pipe ,mounted on MS powder coated plate, frosted glass shade 155mmX129MM FINISH DULL BLACK POWDER COATEDand lacquer coated suitable for 03 to 5 watt LED bulb with required electrical connection complete all as specified and as directed. by engineer in charge.

Supply and fixing decorative fancy type LED lighting fixture double light brass made bracket with 220mmX86mm rectangular base,210mm length U Shaped brass arm 60 mm dia gallery with 2 pin brass holder tipped with 125mm length MS Powder coated down pipe ,mounted on MS powder coated plate, frosted glass shade 155mmX129MM FINISH DULL BLACK POWDER COATEDand lacquer coated suitable for 03 to 5 watt LED bulb with required electrical connection complete all as specified and as directed. by engineer in charge.

Supply and fix brass coating fancy wall spot/Display/picture light with adjustable head and colour changing fucntion 12W complete all as specified and as directed.

Supply and fixing recess mounting LED light fitting 2'x2' luminaire architectural recessed luminaire with CRCA housing and Molded PC diffuser with an unique angular optics for making the illumination easy on eyes for light comfort in office areas with UGR<=19. The luminaire should have a color consistency SDCM< 5, CRI > 80 and choice of CCT: 5700K. Luminaire shall be designed to emit at least 3000 lumens and an efficacy of atleast 120Lm/W and maximum system wattage of 36 Watt, designed for ambient temp 45 deg C. The metallic electronic driver shall have a power factor >0.95, THD <10%, 4KV internal surge protection and the Ripple factor should be <5% to minimise the Flicker and Stroboscopic effect and Fixture should have an operating voltage range of 140-270VAC incl It should have over voltage protection @320V Cut-off with auto restart features. complete all as specified and as directed. by engineer in charge.

Supply and fixing recess mounting LED light fitting of 20/25 watt white powder coated CRCA housing with LEDs.,efficacy 100 lumen/watt,CRI>80 and pf>0.9,surge protection 2.5 KV, Seamless front frame with flat white high transmission acrylic cover complete all as specified and as directed. by engineer in charge.

Supply & fix in replacement LED wall/surface mounted down lighter, 6W including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and as directed.

Supply and fixing LED building security light of 36W Led Street Light made up of pressure die cast aluminium housing with Polycarbonate cover and unique road optics for better uniformity. The luminaire shall be with higher ingress protection IP66 and impact resistance of IK07. Operating voltage range: 140-270V/50Hz, Lumen efficacy of LED >120Lm/W, CRI≥70, CCT-5700K, & SDCM<5. Powered by built-in potted LED driver gives constant light over wide voltage range. Shall have High Voltage cut-off@325V & safety from 440V (P2P) for 8 hours. Surge protection 4 kV, Power factor ≥0.95, THD ≤10 complete including 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting complete all as specified and directed by the Engr-in-Charge.

Supply and Fix LED Strip light warm white incl adapter and all other connected items complete all as specified and as directed.

Supply and fix in rep[air of MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works complete all as specified and as directed.

Supply and fix in rep[air of MCB DB TPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works complete all as specified and as directed.

Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, "C" curve, 10 KA breaking capacity - 12 Nos.

Supply and fix MCB SP 230V, 6-32 Amps capacity complete all as specified and as directed.

Supply and fix MCB SPN 230V, 6-32 Amps capacity complete all as specified and as directed.

Supply and fix MCB TPN 415V, 32 to 63 Amp capacity complete all as specified and as directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings complete all as specified and as directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings complete all as specified and as directed.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20amps SPN MCB complete all as specified and as directed.

Supply and fix mushroom LED Bollard 10W, 800 lumen light, new generation, energy saving, environmental friendly, long life aesthetically designed weather proof luminarie IP-65 and IK-07 protection die-cast aluminium landscape luminaire for downward lighting with high power LED as light source, Surge protection 100V-240V complete all as specified and as directed.. Note: All civil work and earth work for fixing the pole is included in the item rate and NO EXTRA payment will be done to the contractor

Supply and fix LED gate light of 40/45W LED Postop luminaire with aluminium pressure die-cast mounting spigot & polyester powder coating in addition to a specific weathering resistance treatment, color RAL7011. Non-yellowing transparent Polycarbonate UV-protected round symmetrical diffuser with circular radial pattern for glare-free and even light distribution. High Efficiency long life LED module with efficacy of >100Lm/W, CCT 4000K, and CRI >70. Powered by built-in electronic driver with THD <10%, 4kV inbuilt surge protection, high cut-off at 325V & auto-restart, including 8hrs. protection from 440V (P2P). Suitable for pole mounting having OD of 60 mm and height of 6 meters. Fixture lumen efficacy >4500 Lm, IP66 (no glue), IK05, PF>0.95, Operating voltage range: 140- 277V, complete all as specified and as directed. by engineer in charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. Note:- Down rods of suitable length( 4feet,5 feet or 6 feet) is incl in the item rates and no extra payment will be done to the contractor for the same.

Supply and fixing of wall fan of 400 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as specified and as directed. by Engineer - in - charge.

Supply and fixing steel body exhaust 300 mm sweep AC single phase, 230/240 volts 50 Hz with louvers and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm complete all as specified and as directed.

Material and labour Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS rounds 1.5 kgs, funnel ,watering pipe etc. complete all as specified and as directed. including testing on completion.

Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth.complete all as specified and as directed.

Taking down carefully Ceiling fan/wall fan/Exhaust fan complete all as specified and directed by Engineer-in-charge.

Supply and fix frame plate with match cover one module plate all as specified and directed. complete all as specified and as directed.

All as per item No.216 above but two module all as specified and directed. complete all as specified and as directed.

All as per item No.216 above but four module all as specified and directed.complete all as specified and as directed.

Supply and fix terminal box suitable one modular plat of size 75X75x50 mm including cutting, grooving and plastering etc.complete all as specified and as directed.

Supply and fix terminal box suitable two modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. complete all as specified and as directed.

All as item No 224. above but four modular plat of size 128X75x50 mm including cutting, grooving and plastering etc. complete all as specified and as directed.

All as item No 224. above but twelve modular plate of including cutting, grooving and plastering etc. complete all as specified and as directed.

S&F modular bell push single pole 1 module6 Amp, 240 volt complete all as specified and as directed.. complete all as specified and as directed.

S&f call bell , ding dong / musical AC single phase 230 volts complete all as specified and as directed.

M&L in factory made distribution board SP & N 8 way double door fabricated of CRCA sheet with metal door (IP-43 protection) bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as a incomer and 6 SP MCBs as outgoing complete all as specified and directed conforming to IS: 8623 along end box for above DB complete all as specified & directed

Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 100 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SPN, AC, 240 volt of 40 Amp, "C" curve, 10 KA breaking capacity - 16 Nos.

M & L in factory made distribution board 4 way TPN DB Double door with metal double door (IP-43 protection) fabricated of CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps bus bar, Neutral bar, Standard din rail,earth bar and cable ties for cable management, top and bottom removable gland plates with provn for MCB TPN and 12 SP MCBs outgoing complete all as specified and conforming to IS :8623 along with cable end box for above DB complete complete all as specified and as directed.

Supply and fix PVC pipe 25 mm dia for protection of cables complete all as specified and as directed. by Eng-in-Charge

Supply and fix PVC pipe 80 mm dia for protection of cables complete all as specified and as directed. by Eng-in-Charge

Supply & fix LED wall/surface mounted down lighter, 12 W including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and as directed.

Supply and fixing Lithium based Energy efficient Integrated Solar Street Light of 32 Watt" in single FRP body with duly polyurethane coating (camouflage color), encases with monocrystalline solar PV panel of 65-67WP , Lithium Battery 11.1/12.8V, 33.0AH with inbuilt BMS, IP 65 high brightness W-led(160-180LM/WATT) lamp with aluminum reflector for better light distribution, CRI>70, Color Temperature 5700K-6500K, Microcontroller based charge controller cum driver, automatic dimming function (first four hours at full brightness& rest of the time at lower light level with PIR Motion sensor) . Dusk to Dawn operation, suitable to working temperature: (-) 10C to (+) 55C, weight not more than 16-18KG with adjustable MS clamp suitable for pole/wall mounting etc complete as required.Protections: Short Circuit, overload, Reverse polarity and battery protections, Firm should provide vital parameters test report from NABL accredited lab and should be of made in india with CE & ROHS compliant complete all as specified and directed.

S&F LED flood light 100 Watts with aluminium die cast IP 66 with symmetric light distribution energy saving, environmental friendly suitable for high lighting archtechural faced complete all as specified and as directed.

Supply and fixing of PVC air freshner 250 mm sweep AC single phase, 230/240 volts 50 Hz with louvers and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm complete all as specified and as directed.

QUALITY CONSTRUCTIONS CO (BID ID -3100431)

M/S RAJ INTERIORS (BID ID -3100140)

M/s R.K.Traders (BID ID -3115600)

M/S KAUSHIK CONSTRUCTION (BID ID -3100757)

M/s Ramesh Chandra (BID ID -3100265)

m/s raghubar dayal (BID ID -3100519)