Renovation and up gradation of A- type Quarters for Traning/ workshop at AMPRI,Bhopal

Amount

Internal painting of walls and roof by scrapping and removing old surface and then applying putty and making surface smooth by sand paper rubbing painting by distemper/acrylic paint in two or more coat as per instruction of E-in-c scraping and painting of wooden doors, grills and windows by enamel oil paint two or more coat from both side (Distemper, acrylic paint and putty will be provided by department). Approximate area of one quater for Wall is 193 sqm and Cieling is 32 sqm.

External painting of walls, chajja, parapet mumty etc. by externior paint including removal of fungus/ old paint and repairing cracks by polymer based putty etc. (external paint to be provided by department) Approximate External area in one block is around 760 SQM.

Reparing of masnory work, cracks and plaster including removal of debries, plastering by cement plaster 1:4 .(1 cement :4 coarse sand) Approximate area of one quater for Wall is 193 sqm and Cieling is 32 sqm. Approximate External area in one block is around 760 SQM

Repairing of wooden doors including replacing and making door smooth fit for use including reshaping old doors to new doors if required and making new doors by old material in required size and shape by fixing 6/8 mm ply board as per direction of E-in-c. (Old door frames to be provided by department) Approximate 5 doors of internal size 3'x6' in each quater

Fabricating and making door frame by tubular section 4"x1" in required design to be used as door frame for mesh door including welding square roads of 10mm for supporting wiremesh and plate for holding aldrop and suitable fitting to be used as locking mechanism. (Aproximate doors of internal size 3'6"x6'6" in each quater)

Welding & fabricating 2 nos M.S. aldrop (heavy) of 10mm dia pipe to door frame by suitable means including welding one number M.S. tower butt inside and bult hinges to make door frame lockable and functional.(Aproximate doors of internal size 3'6"x6'6" in each quater)

Fixing S.S. wire mesh suitalbe for stopping mosquitos and fly using suitable detachable arrangement of M.S. frame which can be removed easily if required for maintenance. (Aproximate doors of internal size 3'6"x6'6" in each quater)

Painting by applying primer and painting by enamel paint of for frame and door in suitable colour as decided by E-in-C. (Aproximate doors of internal size 3'6"x6'6" in each quater)

Fixing hard rubber of suitable thickness between the gap of door frame and floor to stop entry of insects from the gap at the bottom of door.(Aproximate doors of internal size 3'6"x6'6" in each quater)

Fitting P.V.C/ CPVC float valve in cast iron old type overhead flush tanks with 3 feet long chain and making internal adjustments to make flush tank funcitional for flushing.The cast iron over head tank will be painted by silver paint and the pipe in silver colour.

Fitting angle cock C.P. of make hindustan/jaguar/somany with connection pipe 45-60 cm long to over head flush tank and connecting washers etc. to make flush tank drip free.

Providing and fixing C.P.Bib-cock of suitable length so that it do not obstruct door opening in latrine with C.P. extention nipple of make hindustan/jaguar/somany by suitable means

Providing and fixing C.P. bib cock for kitchen plate form swvel /swan type with extention nipple if required with teflon tape etc as per requirement of make hindustan/jaguan/somany.

Providing and fixing C.P. Pillar cock in washbasin with connection pipe and washers if reqired of make hindustan /jaguan /somany including fixing C.P. angle cock with extension nipple as per instruction of E-in-c

Providing and fixing C.P. bib cock in bathrooms with extention nipple if reqired of make hindustan /jaguan /somany.

Providing and fixing shower rose with shower arm slim type adjustable make hindustan/jaguar/somary.

Cleaning of choked w.c. by suitable means to make it fully functional

Cleaning of floor traps including removing debries to make if fully functional including fitting with C.P. jali of required size.

Cleaning external gully traps/ main holes to make them fully functional including fixing farshi of 30mm thick of require size as cover and fixing same cover by cement mortar 1:4 (1 cement 4 coarse sand).

Cleaning blocked pipes in roof and removing vegetation repairing with cement mortar 1:4 (1 cement 4 coarse sand). And neat cement including fixing C.P. jali of suitable size by cement mortar.

Repairing existing pipe line from overhead water tank outlet to nearest point of staff quarter inlet and fixing stop valve brass by fittings like M.T./ F.T union etc and tank nipple as per site condition

Fitting screw type arrangement and tank cover to existing water tanks by screws as per direction of engineer in charge

Fitting heavy quality CPVC float valve with ball in overhead tank to existing line by suitable fitting in old GI line 35 mm dia

Ordinary cleaning of water tanks by manual labour including removing algae/ rubbing by brush/wire mesh or suitable means and instructions of E-in-C, putting bleaching powder to make water tank fit for storing potable water.

Cleaning chajja and repairing it by cement plaster 1:4 and making it in required shape curing and painting with water proofing compound of make Asian/Berger/Dulux as per manufacture spectification and instruction of engineer-in-charge

Cleaning roof and repairing it by cement plaster 1:4 and making it in required shape curing and painting with water proofing compound of make Asian/Berger/Dulux as per manufacture spectification and instruction of engineer-in-charge

Dismantling unusable brickwork/ concrete work including shifting debries from site and levelign the same as per instruction of engineer-in-charge

Cleaning front grass and vegitation back and sides of staff quarter blocks including uprooting vegitation and making ambience fit for civic use

Replacement old broken glass in glass window and fitting by putty and nutbolts and applying putty in glass where condition in all right and fitting other acessories like handles etc. to make window fully functional.

Removing old pelmet and refixing S.S. pipe of weight not less than 1 kg in fixing studs of suitable size by screws/ nutbolt or suitable means to hang curtain in working condition.

Fixing s.s. pipe of weight not less than 1 kg in almira/cupboard by studs/ bracket suitable means to hang clothes as per direction of E-in-c

Fixing SS wiremesh flyproof in window frames by reap of thickness minimum 18 mm by nails and screws as per site requirement to existing Z section frames. 6 windows of approximate size 4'x 5' and 3 ventilators in toilet and bathroom of approximate size 2'x3'

Fixing round knobs in almira/ cupboard reshaping almira doors by grinding/ refixing doors and making alingnment fit for closing in a proper manner

Supplying and hanging curtains of approved design and pattern with suitable opaque cloth with round rings in windows of size 4'x 5' approximate

Supplying and hanging curtains of approved design and pattern with suitable opaque cloth with round rings of door of size 3.5'x6.5' approximate

Supplying and fixing Mirror by screws/silicon gel or as per direction of engineer incharge near wasbasin / desired location. Approximate size of mirror 2'x2.5'

Supplying square padlock 7 lever with 4 keys make Godrej/Link/Dorma

Supplying labour for shifting of unwanted items/debries/ rubbish and other alike works as directed by E-in-C

Supplying and fixing water storage tank 3 layer white colour in terrace of make Sintex/Plasto/Supremo with suitable fittings and fixtures in CPVC fittings which include MT/FT inlet and outlet connection to existing GI Pipe 35 mm dia , Valve and other plumbing acessories to make fully functional as per instruction of E-In-C ( capacity of tank 500 liters)

Providing and fixing 16-18mm thick granite plateform of size 3'x2' including necessary support to fix in wall moulding of rdges etc complete

Deduct for cost of scrap value of old brass / C.P. Bib Cock which will be handed over to contractor. (Cost of this item will be deducted from bill)

Deduct for cost of scrap value of old brass / C.P. Shower rose which will be handed over to contractor.(Cost of this item will be deducted from bill)

Deduct for cost of scrap value of old brass / C.P. angle cock which will be handed over to contractor.(Cost of this item will be deducted from bill)

Deduct for cost of scrap value of old brass / C.P. Pillar cock which will be handed over to contractor.(Cost of this item will be deducted from bill)

ADARSH CONSTRUCTION AND DEVELOPMENT

MAITRI ENTERPRISES