8287 REPAIRS AND MAINT OF DRAIN, FENCING BOUNDARY WALL HARDSTANDING PATH ETC IN ANGRE KUNJALI TRATA AND OTHER UNITS UNDER AGE BR II UNDER GE KUNJALI

Amount

Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specifed and directed.

Dismantling fencing wire mess, any type

Demolition of cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specifed and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundations, filling and mass concrete, pot holes complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan ex 6 m mean radius built in CM 1:6 complete all as specifed and directed.

M& L for walling of random rubble, uncoursed, well bounded, bedded and solidly hearted built in CM 1:4 complete all as specifed and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling uncoursed or brought up to cousre hammer dressing with maximum depression on face from straigth edge held against the dress surface not exc 40 mm on granite stone

M&L for flush pointing to random rubble masonry uncoursed or brought upto course in CM 1.4 complete all as specifed and directed.

Dismantling posts or struts (wood, steel or RCC) of any section including taking out embedded portion and making good disturbed ground all as specified and directed.

S&F MS angle post & struts as arms over compound wall in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 all as specified.

S&F galavanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain-ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specifed and directed. (each line wire to be measured)

S&F Galvanized concertina coil of 610mm dia made of 0.5mm thick, 19mm wide strip & 2.59mm dia high tensile wire, 125 Nos of clips, having 50 Nos of circles and covering 6 running mtr and 'S' clips per spiral using a central core of high tensile wire around which a tape of razor sharp barbs is machine crimped etc complete all as specifed and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specifed and directed.

M&L for Rendering 15 mm thick in CM (1:6) on fair faces of brick/concrete wall surfaces, finished even and smooth without using extra cement complete all as specifed and directed.

M&L Rendering 20mm thick on other then fair face of brick work or concrete in (15+5) mm thick in two coat in CM (1:4) with finishing coat mixed with water proofing powder at rate of 2% of cement or as per manufacturers instructions complete all as specifed and directed. Note:-(i) WPC shall be measured and paid seprately under respective item.

Supply only Integral water proofing compound

Preparation of new plaster surfaces in walls soffits, facia roof and applying 2 coats of weather proof acrylic based paint (100% acrylic) over a coat of primer complete all as specifed and directed.

Preparation of old plaster surface of wall & applying 2 coat of cement base paint over a coat of primer complete all as specifed and directed.

Preparation of old decorated surfaces washing ,stopping nail holes ,rubbing down and applying two coats of acrylic emulsion exterior paint (100% acrylic) complete all as specifed and directed.

M&L for 100mm thick cement concrete 1:2:4, type B-2, ( using 40 mm graded stone aggregate) as in floor, finished even and fair without using extra cement (for disturbed portion of Hard standing) complete all as specifed and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base of floor complete all as specifed and directed.

S&F chequered cement concrete tiles 25x25cmx25mm thick, set jointed and pointed with neat cement slurry incl 20mm thick screed bed or bedding in CM 1:6 complete all as specified and directed

M&L Machine Pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS- 15658-2006 of 60 mm thickness M-35 grade over and including 50 mm thick fine sand cushioning under paver and necessary watering and consolidation complete all as specified and as directed.

Dismantling cast iron work of any description complete all as specified and directed

S&F cast iron work grade FG-150, unmachined, as in manhole covers, frames and similar articles exceeding 5 Kgs each complete all as specified and directed

All as per Srl item No. 27 here in before but fixing only as material obtained from dismantling item No 26 above.

M&L MS framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ;ladders; railings; f similar work conforming to Fe-290, Gde-E-165 complete all as specified and directed.

S&F Mild steel plates (plain or chequered ) of Grade Fe 410-W, (Gde- E-250) quality-A channels, square cut or notched (ordinary and counter sunk) forming holes , without any attachment, connecting pletes, base plate etc. welding complete all as specified and directed.

S&F For stainless steel special alloy pipe top covered with stainless steel plate grade 304,16 gauge and 50 mm dia welded to stainless steel gusset plate/base plate framed work of railing including required cutting,notching organ welding grinding and drilling countersunk holes and bending to required shape ny mechanical means in factory as per site requirement without forming wrinles and buffingand polishing all as directed.

All as per Srl item No. 31 here in before but 40 mm dia pipe

S&F For stainless steel special alloy chain of 4 to 5 mm dia solid bar/ wire of grade 304,16 gauge welded to stainless steel gusset plate/base plate/pipe of any dia including required cutting,notching organ welding grinding and drilling countersunk holes and bending to required shape ny mechanical means in factory as per site requirement without forming wrinles and buffingand polishing all as directed.

S&F Stainless steel letter/alphabet height 250mm and thickness 25mm polished including taking down old MS work complete all as specified and directed.

Preparation of new steel sufaces of any description ,over 10 cm width or girth and applying 2 coat of synthetic enamel paint over a coat of red oxide/zink primer complete all as specified and directed.

Preparation of old painted steel surface of any description over 10 cm width/girth and applying 1 coat of synthetic enamel paint complete all as specified and directed.

M&L Precast PCC 1:2:4 type B-1(using 20 mm gradded stone aggregate) in landings, cover slabs( for manholes etc.) water troughs, mangers, shelves & similar articles with plain faces set in CM 1:4 complete all as specified and directed.

Mild steel TMT Bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

M&L for running welding in repairs of mild steel gates, grills, manhole covers etc, thickness of metal to be welded exc 9 mm but n exc 20 mm

Removing excavated soil & PCC debris as obtained from demolition and depositing where directed at a level n exc. 1.5 m above the starting point and disposing to the outside of MD land.

M & L rendering 15 mm thick in CM (1:4) brick/concrete surface of walls finished the surfaces even and smooth & mixing of integral WPC etc complete (integral WPC will be measured separately).

M&L cement concrete 1:2:4,type B-2, using 40mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, complete all as specified and directed.

All as per Srl item No. 43 here in before but add for each 25mm girth or part thereof over 30cm girth

S & F in reinforced concrete pipes, class NP2, 150mm dia laid and jointed complete with collars including demolition and breaking up drain pipes of 150mm bore (salt glazed ware, AC or reinforced concrete ) set in cement mortar and removing debris outside MD land complete all as specified and directed (Note - The rates include for laying pipes level or to falls in trenches, etc. on concrete bed or directly on hard ground as indicated and making joints and testing as specified.The rates include for all necessary extra joints, waste, and cutting etc. Excavation and earthwork shall be measured seperately.)

All as per Srl item No. 45 here in before but 200mm dia.

All as per Srl item No. 45 here in before but 300mm dia.

M&LPCC 1:3:6, type C-2 ( using 40 mm graded aggregate) concrete bed to drain pipes of 150 mm bore including packing under, and completely surrounding pipes with concrete after they are laid and tested.

All as per Srl item No. 481 here in before but 200 mm bore

All as per Srl item No. 48 here in before but 300 mm dia

Dismantling of stone slabs and tiles of any description or thickness as on paltform, shelves, floors etc laid, bedded and pointed in any mortar complete all as specifed and directed.

M&L for machine cut kota stone slab as in flooring 20 to 25mm thick riser of steps, skirting, dado and pillar laid over including 15 mm thcik rendering in CM 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab as in flooring 20 to25 mm thick in floor risee of steps, skirting, dado,and pillarsincluding screed bed 15mm thick or bedding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and jointed with greay cement slurry mixed pigment to match shade of slab incl rubbing and polishing complete all as specified and directed.

M&L Machine Cut cudappa stone slab 20-25 mm thick over cement screed baise laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, floor, jambs, pillars, window- cills, cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Repair to steel rolling shutters , with repair/replaced of ball bearing ,taking down top cover , anchoring rod, greasing etc; erected in position as indicated, complete; push pull or manual type complete all as specified and directed.

All as per Srl item No. 56 here in before but gear operated type with bevel gear box and crank handle

Dismantling structural steel work includin doors, gates but excluding framed truss etc. complete all as specified and directed.

Cutting holes into or through stone walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as specifed and directed.

M&L for Bands, straps, supports or stays for rainwater , , including bolts , if required; hooks (stay), heavy, for large gates; hook and pintol hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; , plate washers and similar small articles conforming to Fe-310-O or Fe-410-O complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, Fe-410-O, drilled for fixing of steel sheeting or other cover-ing. Doors, etc. to be prepared for hanging or sliding with and includ-ing either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or oth-er covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L Applying 4 mm thick finished texture mortar in CM 1:2 (mix one part of white cement and two parts of dhoplur clear quartz powder of 1 to 2 mm grading) including texture finish shall be achieved with the help of hand driven machine including preparation of old painted surface and newly plastered surfaces and making plain surface of stone masonary pattern and over that applying two coats of 100 % acrylic exterior paint (Asian or Equivalent) over a coat of exterior grade wall primer, with and including irrection and dismantling of scaffolding to carrying out works upto thirteen stories building, complete all as per manufactures instructions and as directed. Make: Asian/ Berger/ Nerolac.

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed.

S&F 110mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specifed and directed.

All as per Srl item No.64 here in before but 75mm bore PVC (SWR) pipes

S&F 110mm bore PVC (SWR) bends any radius complete all as specifed and directed.

All as per Srl item No. 66 here in before but 75mm bore

Dismentling 75/100mm dia CI pipe jointed in cement mortar and taking out of trenches as required.

S&F 100 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls

All as per Srl item No. 69 here in before but 75 mm bore

S&F CI Bends 75 mm bore ( any radius), diminishing pieces or tapers ( larger bore measured) complete all as specifed and directed.

M&L Cast iron nahani trap with grating including jointing to waste pipe run lead 100 mm complete all as specifed and directed.

M&L Cast iron nahani trap with grating including jointing to waste pipe run lead75 mm complete all as specifed and directed.

M&L for Branch pieces, 100 mm bore single ( equal or unequal), ordinary or inverted ( spigot or socket type) or with parallei branches complete all as specifed and directed.

All as per Srl item No. 74 here in before but , 75 mm bore

S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm/100mm dia bore of pipe complete all as specifed and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, as in valley gutter, ridge of roof, wall and cladding etc. complete all as specifed and directed.

Dismantling structural steel work wrought iron or mild steel work including door, gates, of any description not otherwise provided for complete all as specifed and directed.

S&F of Rolled sections of Fe-410-W (Gde-E-250) quality-B as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specifed and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, chajjas, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge of roof covering/ cladding to wall, chajjas, valley gutter, fixed with self tapping screws as specified.

ABABEEL CONSTRUCTION

RAJU ENTERPRISES

SAIRAM CONSTRUCTION

Gaurav Enterprises

perfect electricales

Vijay Enterprises