NIT No.6 (2025-26)M-VI ITEM No. 20

Distribution panel sheet steel enclosure made out of 2mm CRCA sheet for panel structure and 1.6 mm for doors, totally enclosed, powder coated free standing, floor mounted type, dust& vermin proof, outward opening, lockable doors having hidden hinges and a bolted back cover both using non-deteriorating neoprene rubber gaskets to provide protection .The each part of the fabricated panel will be strictly subjected to seven tank treatment and will include the following procedures. The various components, assemblies and sub equipment’s of the panel will be as per standard given in relevant IS. The bus bar of the panel will be shaped out of high conductivity, electrolytic conductor ALUMINIUM 200 AMP and shall be liberal sized. The control wiring of the panel will be done with PVC flexible copper wires of 1.5mm cross section. Each wire will be terminating with a copper ferule crimped to the wire panel size 1650X1600X350mm. Having following components of approved make. ( PUMP DETAILS - 40HP X 2SET+ 1 CHARGING + 1 DEWATERING PUMP)

MCCB 415V,TP200-250 Amp with spreader & handle. Make - L&T/Siemens/DJB approved make

MCCB 415V, TP 125Amp 36ka With Spreader & handle. Make- L&T/Siemens/DJB approved make

MCB Single pole 6Amp. Make - L&T/Schneider/DJB approved make

MCB Triple pole 32Amp. Make -L&T/Schneider/DJB approved make

MCB DOUBLE pole 32Amp. Make- L&T/Schneider/DJB approved make

SINGLE PHASE PROTECTION–MAKE L&T/C&S/BCH

Amp. Meter digital Type Make -AE/L&T

Volt Meter0-500V Digital Type Make- AE/L&T

MPP type power capacitor 10Kvar Unit 440V 3phase Make -Epcos/ DJB approved make

Motor protection relay 240VAC FOR 20HP Make- L&T/Siemens/DJB approved make

Power contactor 220V 3phase 25Amp.Make- L&T/Schneider/C&S/DJB approved make

Power contactor 220V 3phase 70Amp.Make-&T/Schneider/C&S/bch/DJB approved make

Power contactor 220V 3phase 50Amp.Make-&T/Schneider/C&S/bch/DJB approved make

Current Transformer 200/5 Make- AE/ Advance/ Saviour

Current Transformer 60/5 Make- AE/ Advance/ Saviour

Over load relay 30-50A Make- L&T/Schneider/C&S/DJB approved make

Over load relay 9-15A Make L&T/Schneider/C&S/DJB approved make

Indicating lights LED type RYB & On/OFF Make- FTC/ L&T/jigo

Star delta timer Make - L&T/SELEC

On load 4pole change over switch 200Amp. Make-Havells/C&S/L&T/ELECTRA / DJB approved make

ADD ON BLOCK 1NO + 1NC

PVC insulated copper flexible cable single core 16sqmm Make- Havells, Grandly, Gloster, DJB Approved make

PUSH BUTTON R/G WITH ELEMENT

Angle stand for panel mounting , suitable size 250mm height

Fitting of the above components in panel enclosure with terminal blocks, channels, ferrules, thimbles, support insulator on bus bar, required hardware’s, control wiring in 1.5sq mm wire complete in all respect.

Dismantling of old panel, structure, damaged components and Installation of the panel at site by making foundation, termination of cable both incoming & out going side ,mongering of complete panel , fitting of the starter star delta including cable connection, functional testing of components at no load and testing of panel on load at site with site in charge. This includes cartage, loading& unloading etc.

Prime India Associates (BID ID -1595659)