Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹71.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹73.0 L+₹1.2 L (1.68%)Rejected-AOC | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | A.S.R BODY WORKS L1 | ABT INDUSTRIES LIMITED L2 |
|---|---|---|---|---|---|
| 1.01 | To carry out complete water wash | 2 | No | 767 ₹1,534 Lowest | 810 ₹1,620 |
| 2.01 | To carry out four wheel grease packup inner outer oil seal change | 2 | No | 1,841 ₹3,682 Lowest | 1,950 ₹3,900 |
| 3.01 | Grease 2kg | 2 | No | 1,100 ₹2,200 Lowest | 1,250 ₹2,500 |
| 4.01 | To carryout front wheel,back wheel oil seal | 2 | No | 450 ₹900 Lowest | 590 ₹1,180 |
| 5.01 | Axle packing 2 nos | 2 | No | 100 ₹200 Lowest | 180 ₹360 |
| 6.01 | To replace brake lining front & rear | 2 | No | 5,603 ₹11,206 Lowest | 5,910 ₹11,820 |
| 7.01 | To service four wheel rathect | 2 | No | 1,720 ₹3,440 Lowest | 1,860 ₹3,720 |
| 8.01 | To carryout four wheel brake drum truving | 2 | No | 1,991 ₹3,982 Lowest | 2,500 ₹5,000 |
| 9.01 | To recamber spring plate assembly | 2 | No | 5,600 ₹11,200 Lowest | 5,900 ₹11,800 |
| 10.01 | Front rear centre bolt 4 nos | 2 | No | 300 ₹600 Lowest | 580 ₹1,160 |
Tender Value
₹71.9 L
EMD Value
₹71,893
Closing Date
18 Jun 2025, 3:00 pmClosed
Commissioner Madurai Corporation
Aringar anna maligai
Refurbishment of Existing Dumper placer Vehicle to 6kl Jet rodding Machine 2no in General Fund. Vehicle No TN 59 BA 6647 and TN 59 BA 6554.
2025_MAWS_565072_1
E7 / EST 006564 / 2024
Open Tender
Civil Works
Lump-sum
Madurai
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹71,893
10 Dec 2025
6 Jun 2025
18 Jun 2025
6 Jun 2025
18 Jun 2025
6 Jun 2025
Amount
To carry out complete water wash
To carry out four wheel grease packup inner outer oil seal change
Grease 2kg
To carryout front wheel,back wheel oil seal
Axle packing 2 nos
To replace brake lining front & rear
To service four wheel rathect
To carryout four wheel brake drum truving
To recamber spring plate assembly
Front rear centre bolt 4 nos
To replace spring plate bush change 8 no
8.25 / 16 Tyre TTF Front - 2 Nos
8.25 / 16 Tyre TTF Back - 4 Nos
To service radiator
To carryout Clutch plate cover assembly RC, release bearing & pillot bearing
To replace gear rod ball joint
To service air drier
To service back wheel brake booster 2 nos service,front wheel brake booster 2 nos & tyer drum change
To service U2 value
To replace Dierod end ball kit change
To replace godrod end assembly change
To repalce 1000 MHD battery exide
To replace UJ cross 2 nos change
To replace center bed bearing rubber change
To carryout tinkering work
To carryout driver seat,cleaner seat linear work
To replace replting sticker,markat flop & side mirror
To replace engine linear
To replace engine rings set
To replace engine connecting rod bearing
To replace engine major caskat
To replace engine water pump assembly
To replace engine tapot rod
To replace engine tapot rod bush
Towards the cost Refurbishment of Existing Dumper placer vehicle converted to Jetting Machine with 6kl tanker.. The Equipment is high pressure jetting pump with 6k1 Tanker with Blow back arrangements. Tank: Mild Steel Tank Sheet Thickness - 6 mm Capacity:6KI for water Jetting machine. This jetting and Suction Equipment constructed and mounted on a vehicle and the provision are following 1.Power Drive System 2.Mild Steel Tank 6KI capacity 3.High pressure Jetting pump (imported Italy make) 4.1-inch Jetting Hose and Hose Reel drum (imported) 5.Intermediate gear box (PZB COD) 6. Hydraulic systems & Accessories. With Proper Connectors, ISI Standard Equipment and Hydraulic hoses, Hydro motors, Hydraulic pressure control valve, Hydraulic Tank, PTO with Pump, non-return Adopters. Sub frame Should be Structured by125 x 60 x 6mm thickness "U" Channel with Proper Kilt and fasteners, Paintings: one coat of Epoxy primer and Painting with two coats of anticorrosive paint as per the specified colour and printing the lettering as per the direction of the departmental officers as per our standard specifications, would be...The mentioned rate is including of old body of the Existing Chassis.
To service FIP
To service engine head service
To carryout speed govener pit ment & reneval
F.C work & pollution checkup certificate
To replace thromo set value change
Add GST 18%
ABT INDUSTRIES LIMITED (BID ID -1369550)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .