REPAIRS TO DRAINS BOUNDARY WALL FENCING AND HARD STANDING AT TRISHUL LINES MES IB UNDER AGE B R N NO II OF GE NORTH SECUNDERABAD

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in Concrete, brick work, masonry, etc. , including taking out embedded portion and making good disturbed ground and removal of rubbish/ demolished materials out side of MD land complete all as specified and directed.

M&L Providing PCC (1:3:6) type C2 using (40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed..

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron, fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Chain link MS galvanisd fencing Chain link fencing of mesh size 75x75mm , diameter of wire not less than 3 mm thick complete all as specified and directed.

M&L Preparation of new iron and steel surfaces of any description n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L MS round bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with MS wire 0.9 mm dia annealed all as specified confirming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165) complete all as specified and directed.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, ach screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n exc 10cm long complete all as specified and directed.

M&L Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing and tying at crossings with and provisions of galvanised mild steel wire staple or steel pins etc complete all as specified and directed.

M&L Preparation of new iron and steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down barbed wire any specification complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish/ demolished materials out side of MD land complete all as specified and directed.

M&L PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate), as in sub base for floor, finished even and rough complete all as specified and directed.

M&L PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in surface channels,drains and similar work,etc complete all as specified and directed.

Demolition of precast concrete block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc.,of any discription and in any position, built in cement mortar, including all quoins, arches and pillars etc. and removal of rubbish/ demolished materials out side of MD land complete all as specified and directed.

M&L Precast cement concrete block masonry with solid blocks exc 10cm in width using PCC (1:3:6) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) and set and jointed in CM (1:6) complete all as specified and directed.

Taking down cement plaster on brick walls incl raking out joints hacking for key scrubbing down with water etc. and removal of rubbish/ demolished materials out side of MD land complete all as specified and directed.

M&L Rendering 15 mm thick CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without unsing extra cement complete all as specified and directed.

M&L Providing poles with using Stainless steel 304 grade of any dia and any thickness complete all as specified and as directed including dismantling old pipe. complete all as specified and directed.

S&F in repairs of stainless steel 304 series retro reflective board written on both sides of any size and shape board colour green and white as per IRC 67:2012 also including fixing etc and any type font size of alphabet/ number and board sheet thickness etc including dismantling old board. Complete all as specified and as directed. (Note: Board will attach with stainless steel pole and embedded as Excavation for bed block of size 150 mm x 150 mm x 200 mm filling with cement concrete 1:3:6 Type C1 (using 20 mm graded stone aggregate) and clearing of the area shall be included in the rate quoted.)

Taking out existing old kerb stones and M&L for factory made precast machine pressed kerb stones of PCC grade M-15 (Design mix) and of shape and size,set jointed and pointed with CM (1:4) including necessary excavation and earthwork and making good the disturbed surfaces to match with the existing surfaces including removal of disposal of rubbish complete all as specified and directed. Note: Sizes shall be as under :- Length (L) not less than 300mm, Height (H) 300mm to 350mm, Thickness (T) 100mm and radius (R) 75mm

M&L 35 mm thick (measured solid) Precast cement concrete louvers/jallies,jafri wall with PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) including moulding and fixing of any type and set in CM (1:4) complete all as specified and directed.

M&L Preparation of old decorated surface of kerb stones and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge

M&L Preparation of newly kerb stone surfaces and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats of acrylic weather proof paint (Exterior grade) over a coat of primer as per manufacturers instructions,complete as all specified and directed by Engineer-in-Charge.

M&L Preparation of old plastered surface of wall and applying one coat of acrylic weather proof paint (Exterior grade) as per manufacturers instructions,complete as all specified and directed by Engineer-in-Charge

M&L Preparation of old decorated surface of walls and applying one coat of cement base paint complete all as specified and directed.

Use and waste of Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces.complete all as specified and directed.

M&L Providing RCC (1:1.5:3) by (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts.complete all as specified and directed.

M&L TMT bars 10 mm dia and over cut to length bent to shape required including cranking,bending,spirally for hooping and binding with and including mild steel wire anealed not less than 0.9 mm dia complete all as specified and directed.

All as per Item No.31 above, but 5 mm dia and over up to and including 10 mm dia as in stirrups spacers and binders complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L Framed work such as grills, gratings, Gates etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and ornamental and intricate design conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L Vitrified tiles (Durastone / Endura) heavy duty not less than 12mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.16 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L Chequered cement concrete tiles of size 250mm x 250mmx 25mm thick, as in floors,set jointed and pointed in cement slurry with grey cement and pigments complete all as specified and directed.

M&L Screed bed or bedding layer of 15mm thick CM (1:6) for laying floor finishes complete all as specified and directed.

M&L 60 mm thick, machine made, 1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles, of triangular / Zigzag / Haxagone/ I , in shape or shap and designe as approved, with grey cement and pigment, having crushing strength not less than 300 Kg / Sqcm and conforming to IS specifications,complete all as specified and directed.

M&L 80 mm thick, machine made, 1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles, of triangular / Zigzag / Haxagone/ I , in shape or shap and designe as approved, with grey cement and pigment, having crushing strength not less than 300 Kg / Sqcm and conforming to IS specifications complete all as specified and directed.

M&L Sand filling under floors/paver blocks or in foundations including filling the joints with sand as in floors/ paths including watering and consolidation complete all as specified and directed.

Dismantling structural steel work of any description and in any position including doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F Roof trusses (framed) trusses purlins and fastening (etc., angle, channel,tubular section,round pipe) or flat section including distance pieces, MS plates/ gusset plates, cleats, hold fast etc. conforming to Gde of steel Fe 410-0 or Fe 310-0 complete all as specified and directed.

Dismantling plain or corrugated A/C or steel sheeting, any guage of any description and in any position as in roof coverings and S &F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in roof covering / cladding to wall, fixed with L or J hooks complete all as specified and directed.

Dismantling plain or corrugated A/C or steel sheeting, any guage of any description and in any position as in roof coverings and S &F for pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in ridge etc fixed with L or J hooks complete all as specified and directed.

CHATLAPALLY NAGENDER (BID ID -3139813)

G SATISH REDDY AND CO (BID ID -3139857)

NEWS CONSTRUCTIONS (BID ID -3140405)

SAI RAM CONSTRUCTIONS (BID ID -3126671)

saradhi construction combines (BID ID -3125808)

M/s GM Constructions (BID ID -3139869)

VACON INFRASTRUCTURES (BID ID -3139924)

M/S DIVIJA BUILDERS (BID ID -3140031)

K LAKSHMAN SINGH AND CO (BID ID -3139725)

abhilasha constructions (BID ID -3133200)

S.R.M.K Enterprises (BID ID -3133137)