Repair Installation and commissioning of two 2 No 25 HP capacity Booster Submersible pumps installed in the GLSR behind the IB for drinking water supply to the Ravindranagar area

Repair Installation and commissioning of two 2 No 25 HP capacity Booster Submersible pumps installed in the GLSR behind the IB for drinking water supply to the Ravindranagar area

Dismentling of Incoming and outgoing power cables from Pannel Board to Motor Connection

Lifting of Existing 25 HP Polder Pump Set JASCO MAKE SL No:03635 /17 and 036335/18 at Near IB inside GLSR by the help of 5 Tonn Capacity Chain Pully Block and Trappered Stand through the Help of Heavy...

Unloading of Folder Pumpset at Workshop observing and inscpecting 25 HP JASCO Make Polder type Single Impleier pump Two Numbers. And dismentling of carefully opening DE and NDE Cover with bottom stai...

Dismentling of burnt winding wire, cleaning of stator slots by the help of nice scraping with filing surface cleaning to complete slots with washing liquid oil with detergent powder mixing 100% water ...

Full Rewinding Using of water proof insulation coils formation and rewinding of starter by using poly venyle chloride (PVC) double coated copper insulated wire and applying water proof and water tuff...

Machenical and Machine Shop Work : Mechanical work : Rectification of both DE and Side sicle covers boring the bearing housing of both side, providing suitable sleevs with rotor shaft welding, turnin...

Replacement of warnout damaged parts to replacement new spairparts Bronze neck ring moulding turring polishing required size.

Replacement of warnout damaged parts to replacement new spairparts Supply and fixing of pump bush bearings

Rotor surclips and check nuts etc..,

Oil Seal or water seal unit

Pump shaft, Bearing sitting, welding turring smooth finishing and balancing etc.,

Replacing worm out Nut & Bolts, packing etc.,

Re Assembling to all parts pump and motor with idle testing of all parameters values to original portion to power supply pre commissioning started to at workshop

Lead and lift and Transportation from work site to work shop and work shop to work site including men and materials with tools goods vehicle

Unloading Reconditionable pumpset at site near IB GLSR then start to errection work, motor cuppled, cable jointing, power cable connection, put it in motor pure drinking water to fill the winding por...

Commissioning Pumpset after errection and fittiing work completed, testing and trial run and loaded run, fully commissioing upto 6 hours each pump set running etc.,