Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.3 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹33.9 L+₹1.7 L (5.41%)Rejected-Finance OLD PULL MADIYA JAIRAMPUR AZAMGARH AZAMGARH UTTAR PRADESH 276001 | AZAMGARH | UTTAR PRADESH | 276001 | L2 | Rejected-Finance Higher Bidder | |
| 3 | L3₹34.5 L+₹2.4 L (7.33%)Rejected-Finance 80 G T ROAD FEROZEPUR CANTT PB | L3 | Rejected-Finance Higher Bidder | |
| 4 | L4₹39.1 L+₹7.0 L (21.8%)Rejected-Finance | L4 | Rejected-Finance Higher Bidder |
Tender Value
Refer Docs
EMD Value
₹85,800
Closing Date
22 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Ferozepur Cantt
HQ CWE Ferozepur Cantt, PIN-152001
CWE/FZR-23/2023-24 Addn/Altn to Bldg No 1,2 and 3 (J The Mall) of Fd Hosp under GE(West) Ferozepur Cantt
2023_MES_625030_1
CWE/FZR-23/2023-24
Open Tender
Civil Works
Item Rate
180 days
Ferozepur Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE(West) Ferozepur Cantt
₹85,800
Yes
8 Jan 2024
26 Oct 2023
29 Nov 2023
26 Oct 2023
22 Nov 2023
9 Nov 2023
Amount
Dismantling brick tiles or terracing tiles laid in single layer on roofs jointed and pointed in cement mortar complete all as specified and as directed by Engineer-in-Charge.
Demoletion of mud phuska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed by Engineer-in-Charge. Note :- The demolished materials/ mud pushka to be removed min 50 m away from the site
Material and labour for 10 mm thick screed bed and bedding layer of plaster in cement mortar 1:4 on top of roof over mud pushka complete all as specified and as directed by Engineer-in-Charge.
Material and labour for applying tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm including cleaning surfaces complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 150 micron polythene film laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm including preparation of roof surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 80 mm thick average consolidated thickness,mud phuska on flat roofs including 25 mm thick mud plaster complete all as specified and as directed by Engineer-in-Charge. Note :- 1. Mud to be renewed/ changed into fresh soil mud. 2. Mud phuska to be prepared as per procedure laid in SSR Part -I
Material and labour for 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5 % of crude oil by weight of cement on mud phuska and pointed flush as work proceeds complete all as specified and as directed by Engineer-in-Charge.
Material and labour except tiles for 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5 % of crude oil by weight of cement on mud phuska and pointed flush as work proceeds complete all as specified and as directed by Engineer-in-Charge. Note :- Old brick tiles retreived by dismantling of treatment vide item No 1 above to be reused.
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed by Engineer-in-Charge
Material and labour for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering including front face mouldings etc /cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge
Material and labour for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge
Material and labour for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed by Engineer-in-Charge
Material and labour for plates (plain or chequered) 10 mm thickness channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed by Engineer-in-Charge
Material and labour for preparation of new steel surfaces and applying two coats of synthetic enamel paint (ordinary tint) over a coat of primer over 10 cm in width or girth not otherwise described complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old painted steel surfaces , of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete .
Dismantling timber scantlings 40 sq. cm and over in section, ( roof truss , purlins & girders etc.) in any position complete all as specified and as directed by Engineer-in-Charge
Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair Coloured PVC sheet in strips 2 mm thick for fixing in wall lining/ cladding etc, fixing with screws/nails at site with L shape corner/ mouldings at top and bottoms etc complete all as specified and as directed by Engineer-in-Charge.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed by Engineer-in-Charge
Supply and fixing Anodised aluminium snap grid frame (Powder coating ) work for false ceiling complete all as specified and as directed by Engineer-in-Charge
Supply and fixing particle board/ tiles of (Armstrong / Gyprock ) for insulation and accoustic purposes, 60x60 cm in size, and 8 mm thick fixed with nails to timber frame work or with staples on snap grid complete all as specified and as directed by Engineer-in-Charge
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as specified and as directed by Engineer-in-Charge
Material and labour for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in flooring/(levelling course etc) complete all as specified and as directed by Engineer-in-Charge.
Material and labour for screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in cooking platforms / counter for WHBs etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-Charge
Material and labour for Light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge.
Material and labour for coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge
All as per above item -26 but in skirting etc complete all as specified and as directed by Engineer-in-Charge
All as per above item -27 but in skirting etc complete all as specified and as directed by Engineer-in-Charge
Material and labour for glazed coloured ceramic tiles 450X 350X 7mm thick on vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rendering 10 mm thick on fair faces of brick work in CM (1:4) as bedding of tiles etc complete all as specified and as directed by Engineer-in-Charge.
Demolition of brick work or stone / boulder masonary built in cement mortor including all quoins, arches, pillars etc but excluding precast concrete articles complete all as specified and as directed by Engineer-in-Charge.
Material and labour for brick work with sub class "B" bricks straight or curved on plan to any radius built in CM 1:6 complete all as specified and as directed by Engineer-in-Charge
All as per item No 33 above but except bricks ( old bricks shall be reused after proper cleaning retrived from items No-32) complete all as specified and as directed by Engineer-in-Charge
Material and labour for Half brick work with sub class "B" bricks built in CM 1:4 complete all as specified and as directed by Engineer-in-Charge
Demolition of cement concrete in ground floor n.exc 15cm thickness (below or above ground level) and removing the demolished material and debris out side of MD land complete all as specified and as directed by Engineer-in-Charge.
Material and labour75 mm PCC 1:3:6 type C1 using 40 mm graded stone aggregate as in plinth protection and other similar works finished even and smooth without using extra cement including necessary form work complete all as specified and as directed by Engineer-in-Charge
Demolition of cement Concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge
Material and labour for RCC Nominal mix 1:2:4 , Type- B-01 (using 20 mm graded crushed stone aggregate) as in bases of pillars/ posts/ colns etc complete all as specified and as directed by Engineer-in-Charge
Material and labour for Formwork ( square or rectangular ) to sides of pillars, posts, struts, piers, columns and stanchions etc for rough finished surfaces of cconcrete complete all as specified and as directed by Engineer-in-Charge
Taking down chowkhats n exc 1.50 sqm each (without taking off shutter from the frame) complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkhats or frames exc 1.50 sqm and n.exc 4.00 sqm each (without taking off shutter from the frame) complete all as specified and as directed by Engineer-in-Charge.
Taking down of unserviceable Aluminium/steel windows/ Ventilators with frame (without taking down shutters and grill from frame) of size not exc 1.50 sqm each including cutting holes of appropriate size for insertion blocks of cement concrete hold fasts complete all as specified and as directed by Engineer-in-Charge.
Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m complete all as specified and as directed by Engineer-in-Charge
Supply and fixing mild Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed by Engineer-in-Charge
Material and labour for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n. exc. 0.50 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 125 x 60 mm size Pressed steel frames for doors with one or more rebates including fixing necessary lugs, hinges, lock strike plate, etc., complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing105 x 60 mm size Pressed steel frames for doors with one or more rebates including fixing necessary lugs, hinges, lock strike plate, etc., complete all as specified and as directed by Engineer-in-Charge.
Material and labour for providing cement concrete type C1, 1:3:6 (using 20 mm graded crushed stone aggregate) as in bed blocks for hold fast, purpose made bolts and filling in pressed steel chowkhat and all other similar works including necesssary form work complete all as specified and as directed by Engineer-in-Charge.
Supply & fixing 35 mm thick 2nd hard wood rail and style plain framed panelled shutters(any panel) with lock rail and panel of 9 mm thick B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge.
Material and labour for glazed and skeleton shutters 35 mm thick 2nd class hard wood open rebated and prepared to receive gauze etc divided into squares rebated sash bars any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, gauze of sizes of memebres as specified in SSR Part-I section 8 clause 8.20 (b ) (gauzed shutter etc) complete all as specified and as directed by Engineer-in-Charge
Material and labour for Preparing new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge
Material and labour for preparation of old painted wood surfaces , of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge .
Supply and fixing PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per manufacturer's specification & drawing complete all as specified and as directed by Engineer-in-Charge.
Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
Supply and fixing for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.
Material and labour for 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing mild steel butt hinges 100 mm long, medium weight , cold rolled complete all as specified and as directed by Engineer-in-Charge
Supply and fixing aluminium handle 150 mm long, cast type anodised complete all as specified and as directed by Engineer-in-Charge
Supply and fixing aluminium anodised 150 mm long barrel tower bolts of extruded section complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge
Supply & Fixing in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete.
Supply and fixing in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair vitreous China wash basin white, flat back, size 550X400 mm including CP coupling, waste pipe and cutting for pinning in ends of brackets, complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) incl. providing and fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 complete all as specified and as directed by Engineer-in-Charge
Taking up or down steel tubing 15 mm dia and connection including cleaning for refixing complete all as specified and as directed by Engineer-in-Charge
Supply and fixing GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed by Engineer-in-Charge
Fixing only old 15 mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and as directed by Engineer-in-Charge
Taking up or down steel tubing 20 mm dia bore and connection including cleaning for refixing , complete all as specified and as directed by Engineer-in-Charge
Supply and fixing GI tubing 20mm bore medium grade with all fittings and fixed complete to wall and ceilingor laid in floors complete all as specified and as directed by Engineer-in-Charge
Fixing only old 20 mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and as directed by Engineer-in-Charge
Supply and fixing as in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair 15 mm bore fancy type chromium plated pillar taps, with capstan heads, screwed down, high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and as directed by Engineer-in-Charge
Supply and fixing as in repair 15 mm bore fancy type CP angle cock / stop valve cast copper alloy screwed down, high pressure, with capstain handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-Charge
All as per above items No-78 but Concealed stop cock complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repairs 15 mm bore CP brass shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engineer-in-Charge
Material and labourin repair CP toilet paper holder complete all as specified and as directed by Engineer-in-Charge
Material and labour in repair for 15 mm bore fancy type wall /WHB brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair vitreous China wash down water closet pan (White) one piece of Size 680 x 370 x 750 mm with integrated cisteren, seat cover and twin flush settings including soft close seat cover and connection to drain complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair PVC connection 15mm size PTMT nuts of length 450 mm. complete all as specified and as directed by Engineer-in-Charge
Material and labourin repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge
Material and labour in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge
Supply and fixing shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed by Engineer-in-Charge
Demoletion and breaking up drain pipes upto 100 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar complete all as specified and as directed by Engineer-in-Charge
Supply and fixing 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, and fixed to walls complete all as specified and as directed by Engineer-in-Charge.
110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge
Supply and fixing 110 mm dia PVC (SWR) junction single, (single T) equal or uequal provided complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repairs PVC water tank 1000 ltr capacity rotational moulded polyethelene water storage tank double layered (Cylindrical verticle with closed top) hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge and as directed
Supply and fixing in repairs for Gun metal globe or Gate valve 15 mm size with iron wheel screwed both end for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repairs for Gun metal globe or Gate valve 20 mm size with iron wheel screwed both end for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge
Supply and fix in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm dia complete all as specified and as directed by Engineer-in-Charge
Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge
Material and labour for rendering 15 mm thick cement plaster on fair faces of brick work / concrete surfaces in CM 1:4 finished fair and even complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rendering 15 mm thick cement plaster on other than fair faces of brick work / concrete surfaces in CM 1:6 finished fair and even complete all as specified and as directed by Engineer-in-Charge.
Material and labourfor 5 mm thick cement plaster in CM (1:3) on ceiling surfaces and finish the surface fair and even without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparing newly plastered/ unplastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-Charge
Material and labour for complete removal of existing surface and applying two coat of cement base paint on walls, etc white or tintedcomplete all as specified and as directed by Engineer-in-Charge
Material and labour for preparation of newly plastered ceiling surfaces and three coats white wash complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots and apply one coat of white wash on ceiling surface complete all as specified and as directed by Engineer-in-Charge
Material and labour for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1 mm thick wall care putty including a coat of primer complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots and apply one coat distemper oil emulsion on walls complete all as directed.
Material and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer over 3mm thick (average) wall care putty applied in two coats including rubbing with siutable sand paper achiving smooth surfaces complete all as specified and as directed by Engineer-in-Charge
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.etc complete all as specified and as directed by Engineer-in-Charge.
Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity complete all as specified and as directed by Engineer-in-Charge.
Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified
M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC conealed conduit, with all accessories as required such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge for One light/fan/Bell Point controlled by one single pole one way switch .
ditto all as per item 114 above but One 5 Amps socket outlet same board controlled by one single pole 5 Amps switch
ditto all as per item 114 above but One 5 Amps socket outlet independent board controlled by one single poles 5 Amps switch complete all as specified and as directed by Engineer-in-Charge
ditto all as per item 114 above but but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair Modular Switch one way 6 A, 1 module complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair Modular Switch one way 16 A, 1 module complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair Modular Socket,6A - 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair Modular Socket,6A16A - 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair Modular white cover plate including GI box inner, 3 module complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair Modular white cover plate including GI box inner, 4 module complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair Modular white cover plate including GI box inner, 8 module complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair Modular step type regulator,120 W - 2 module complete all as specified and as directed by Engineer-in-Charge
Supply & Fixing LED tube light fitting 18 Watts,4 feet long decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in-Charge
Supply and fixing of LED Mirror light 7 Watt 2 ft adjustable type enegy saving curve type complete all as specified and as directed by Engineer-in-Charge
Supply and fixing of LED Wall bracket light 8 Watt decorative type (Warm white) enegy saving including 8 W LED Bulb complete all as specified and as directed by Engineer-in-Charge
Supply and fixing LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb complete all as specified and as directed by Engineer-in-Charge
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed by Engineer-in-Charge
Supply and fixing Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals ISI marked complete all as specified and as directed by Engineer-in-Charge
Supply and fixing Modular bell push piano flush type 6 Amps 1 module duly ISI marked complete all as specified and as directed by Engineer-in-Charge
Supply and fixing bell ding dong AC 230 volts single pole complete all as specified and as directed by Engineer-in-Charge
Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and as directed by Engineer-in-Charge
Supply and fixing MCCB 4 pole, 415 volts, 100 Amps, 36 kA, 50 Hz complete all as specified and as directed by Engineer-in-Charge.
Supply & Fix in repair sheet metal enclouser SPN DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge
Supply and fixing MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge
Supply and fixing MCB SP, 40 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge
Supply and fixing modular type AC motor starter 25 Amps 230 volts Two module complete all as specified and as directed by Engineer-in-Charge
Supply and fixing modular type 10 A / 25 A shuttered socket, 230 volts Two module complete all as specified and as directed by Engineer-in-Charge
Material and labourfor sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia complete all as specified and as directed by Engineer-in-Charge ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run)
Supply & Fix in repair sub main wiring of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed. Note:-Two run of single core 4 sqmm cable and one run single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).
Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sqmm 3.5 core complete all as specified and as directed by Engineer-in-Charge
Excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 meter in depth for taking out and laying UG cable and getting out, excavated earth, forming bottom surfaces to required level complete all as specified and as directed by Engineer-in-Charge
Material and labour for sand cushioning with a layer of fine sand 8 cm thick begore laying of cable and 5 cm thick after laying of cable in trenches complete all as specified and as directed by Engineer-in-Charge. Notes : (i) Excavation and earth work to be measured and paid separately). (ii) Thickness of 18 cms after punning shall be considered for payment.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed by Engineer-in-Charge
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by Engineer-in-Charge
Material and labour Bricks (Size 23x11.5x7.5 cm) common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of UG cable complete all as specified and as directed by Engineer-in-Charge
Supply and fixing mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc as required complete all as specified and as directed by Engineer-in-Charge
Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to spoxsed steel surfaces. complete all as specified and as directed by Engineer-in-Charge excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)
ABHISHEK AND COMPANY
HARBHAJAN SINGH KHARBANDA
M/s Surjit Singh and bros
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .