SPL REPAIR TO BLACK TOP ROAD FROM RP GATE NO 2 TO OR LIVING AREA AT LOWER KDD UNDER GE TENGA

Amount

M&L for repair to potholes any depth, making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm, complete all as specified and directed by Engr-in- Charge.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and exc 50mm but not exc 100mm deep, complete all as specified and directed.

M&L, 75 mm thick (compacted thickness ) WBM with coarse aggregate of grading 2 (63 to 40mm) spread rolled and consolidated to gradiant materials using lime stone , sand stone, flintz or quartzite, spread, and rolled consolidated to out complete to required camber etc, complete all as specified and gradient and camber required and rolled with power roller of capacity 8 to 10 tonne, complete all as specified and directed.

4. M&L for preparation unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the clean surface with gunny bags to remove all loose dirt etc, complete all as specified and directed.

M&L for premixede bituminious macadam using paving bitumen @ 4% by weight of total mix consolided thickness 50mm, complete all as specified and directed.

M&L for Sami dense asphaltic concrete using paving bitumen @ 5.5% by weight of total mix consolided thickness 40mm, inclding rolling and Consolidating to bitumen maccadam surrfaces using using pewer roller exc 8 Ton but n.exc 12 Ton, complete all as specified and directed.

M&L for applying evenly a priming/ tack coat with bitumenious primer 10 Kg per 10 Sqm on WBM surfaces, complete all as specified and directed.

M&L for applying evenly a priming/ tack coat with bitumenious primer 5 Kg per 10 Sqm on existing black top surfaces, complete all as specified and directed.

M&L for preparing bituminious surfaces of road and marking 2.5mm thick center lines, stop line, dashes, arrows etc and the like 10 cm or above wide on roads pavements with hot applied thermo plastic road marking paint of approved colour conformring to BS 3262-1989 with special applicator machine all as per manufacturers instruction, complete all as specified and directed.

S&F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions and as directed.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

S&F polycarbonate convex mirror (80 CM dia) make 3 M or equivalent in AUTONAT/ACE/DARK EYE/ISI marked, poly carbonate body mounted on 16 gauge MS pipe of 75mm outer dia fixed 1.5 mtr above ground surface and 60 cm below ground level incl PCC foundation of size 30x30x60cm with PCC1:3:6 type C1 bottom part of MS pipe welded with 5mm thick 125 x125mm MS pipe for anchorage in PCC, MS pipe shall be painted stove enamelled paint over a coat of red oxide, incl necessary earth work excavation in any kind of soil, removal and disposal of spoil complete all as specified and directed by Engr-in-Charge( Note:- Convex Mirror shall be as per sample).

M/S R.N ENTERPRISE (BID ID -3169394)

M/S ASHOK CONSTRUCTION (BID ID -3169408)

M/S Karkies Construction & Co. (BID ID -3169453)

M/S SUNRISE CONSTRUCTION AND CO (BID ID -3169419)

M/S MURPHEW ENTERPRISES (BID ID -3169429)

M/S KUNKAPU ENTERPRISES (BID ID -3169401)

M/S N D ENTERPRISE (BID ID -3169443)