Addn Altn of old barbed wire fence with chain link fencing alongwith iron pole from NP11 to NP12 and P20 to P21 at R Zone Provn of two washrooms at Multi utility hall at ALG and Provn of Elect and plumbing for existing building under GE (E) FZR Cantt

Amount

Dismantling posts or struts (wood,steel or RCC.) any section,including taking out embedded portion and making good disturbed natural ground, complete all as specified.

Dismantling fencing wire mesh,any type, complete all as specified.

Excavating in post holes (or similer holes) each n exc 0.5 cum getting out,returning filling in and raming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface in soft/ loose soil complete all as specified.

M&L for cement concrete type C-2 1:3:6 using 40mm graded stone aggergate as in foundations filling and mass concrete, complete all as specified.

M&L for cement concretetype C-1 1:3:6 using 20mm graded stone aggergate in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, as direted complete all as specified.

S&F Mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting etc and similar work confirming to Fe-290 Gde E-165, complete all as specified.

S&F Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe 410-0 or Fe 310-0, complete all as specified.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10 cm long diameter of the neck in 5 to 10 mm, complete all as specified.

S&F Mild steel Round bars 10mm dia and over,cut to length, bent to shape required, complete all as specified.

S&F GI chain link fancing 100 mm diagonal mesh size of 2-3 mm dia wire fixed angle iron fencing post including prov. of binding wire complete all as specified.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. complete all as specified. (each line wire to be measured)

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over primed steel surfaces complete all as specified.

M&L for excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth for fdn n. exc 10 sqm on plain and n. exc 1.5m in depth and getting out insoft/loose solil complete all as specified.

M&L 150m dia SGSW drain pipes laid in trenches and jointed complete all as specified.

M&L PCC 1:3:6 type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes afrter they are laid and tested in 150 mm bore pipe complete all as specified.

M&L for brick work with sub class `B' bricks, straight or curved on plain exc 6 metre mean radius, built in CM 1:6 complete all as specified.

M&L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling as mass concrete or in sub base of floors complete all as specified.

M&L for providing precast cement concrete type B-1:2:4 in manhole cover including necessaryh form work excluding reinforcement and set in CM 1:4 complete all as specified.

M&L for cement concrete type B-2, 1:2:4 in coping of main hole complete all as specified.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces (finished even and smooth without using extra cement complete all as specified.

M&L for removing excavated soil n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified.

M&L for returning, filling in inluding spreading, levelling, watering and well ramming in layers n. exc 25cm complete all as specified.

M&L for 6 to 8 mm dia TMT mild steel bars cut to length bent to shape as required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0-.9 mm dia or secureing with clips complete all as specified.

Cutting into existing manhole for connecting new drain pipe (150mm dia),making good to pipe and rendering, cutting out existing benching for and forming brench chennel in cement concrete 1:2:4 type B-1 smooth finished etc, complete all as specified.

M&L Hardcore of broken bricks of gauge n. exc 63mm, deposited spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified..

M&L Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement including provision of construction joints complete all as directed by Engr-in-Charge and as specified.

M&L for 40mm thick PCC( 1:2:4 )type B-0 (12.5mm graded stone aggregate) as in DPC including necessary form work . complete all as specified and directed.

M&L Rendering/plastering, 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified.

M&L rendering/plastering, 5 mm thick in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified.

Preparation of new plastered surfaces of wall and applying two coats of Oil bound distember over a coat of primer complete all as specified.

Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified.

Preparation of new plastered surfaces of ceiling and applying three coats white wash complete all as specified.

Use and waste of Form work to soffits of suspended roof slabs not exceeding 200 mm thick (horizontal or slopping rough finished Flat surface of concrete, complete all as specified.

Use and waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizintal or sloping & similar work exc 10cm but n exc 20cm wide Roughed finished surface of concrete complete, all as specified.

Mild steel 10mm dia and over TMT bars as in reinforcement cut to length bent to shape and required including cranking bending spirally for hooping for columns hooding ends and binding with and including mil steel wire (annealed) not less than 0-.9 mm dia or secureing with clips complete all as specified.

M&L cement concrete 1:2:4 Type B-1 using 20 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified.

M&L for Reinforced cement concrete Nominal mix(1:2:4) (12.5 mm graded aggregate) as Slab supported on walls beam and column in floor etc complete all as specified

S&F Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/08 & 1020/08

M&L Mild steel framed work of E-165 (Fe 290) as in grills/guard bars shouldered with steel window/ ventilator frames including red oxide primer coat complete all as specified.

S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each complete all as specified.

S& Fstainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed

S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Make: Rajshri or equivalent as approved.

S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified.

S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified.

S&F PTMT door handle, 150 mm long and fixed with steel screws complete all as specified Make Prayag/Polytuf or equivalent make as approved by GE.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified.

S&F Vitreous china urinal partition white of size 310x700 mm. complete all as specified.

S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings, complete all as specified.

S&F20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed by Engr-in-Charge.

S&F of Glazed coloured and cereamic tiles of size 450X350X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incuding backing coat 10mm thick in cement mortar 1:4 as in skirting dados and vertical surfaces all as specified and directed .

S&F 125mm dia PTMT grating doom fixed over trap with cement complete all as specified.

M&L 18-20mm thick granite (Of any type ) work (table rubbed and polished ) in steps,jambs pillars window -cills cooking platforms and like in cement mortar (1:4) incuding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and incuding 15mm thick screed/backing coat and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing,polishing complete all as specified and directed. Note:- Rate quoted by the contractor deemed to inclusive of the following:-.(i) Exposed edges to be rounded

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends any radius complete all as specified.

S&F 75mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified.

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. (Make : Prince, Kissan, Finolex or equivalent)

S&F 110mm bore, PVC (SWR) bends any radius complete all as specified.

S&F PVC (SWR) vent cowl, for 110mm bore pipe complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified.

M&L for Vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles n exc 0.36Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over and incuding 15 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes. complete all as specified.

S&F Table top Vitreous china Wash hand basin white concealed /under counter basin type fit under granite platform size 405x405x145mm in cluding CP bottle trap all other fixing arrangements all as specified and directed. Make:- Jaquar Model NO:CNSWHT:905), CERA Cat No-S2020143 and equivalent cat part in make Marc

S&F brass CP Bibcock with wall flange50 to 65mm long 15 mm dia bore type with handle, screwed down, screwed for iron pipe or famale of quarter turn type as fixed in repairs all as specified and directed by Engineer-in-Charge. Make:- Jaquar Cat part No LYR-38037, CERA Cat part No F1016151 and equivalent cat part in make Marc

S&F Two Way brass CP Bibcock with wall flange50 to 65mm long(facilitate to fix the Halth faucet) 15 mm dia bore type with handle, screwed down, screwed for iron pipe or famale of quarter turn type as fixed in repairs all as specified and directed by Engineer-in-Charge. Make:- Jaquar Cat part No LYR-38041, CERA Cat part No F1016163 and equivalent cat part in make Marc

S&F 15mm dia Single lever basin mixer with 300 mm (12") extended body and 450 mm braided connection pipe (without pop-up) complete all as specified. Make: CERA Cat No:F1018452/Jaquar Cat NO:KUP-35005BPM and equivalent

S&F in repairs Health faucet (ABS Body) with 8mm dia 1.00 m long flexible tube(PVC /stainless steel coated) and wall hook all as specified and directed by Engineer-in-Charge. Make:- Jaquar cat No: ALD-583; Cera Cat NO:F8030103 and equivalent cat part in make Marc

S&F Vitreous china wash down water closet pan (pedestal pattern)white/coloured cascade type640X360X685 (monolithic flush cistern type)single picece wc with PP seat cover ,Hinges fixing accessories set including flush cistern with S-Trap of size 110mm all as per manufacturing instructions and all as specified and directed.Make: Jaquare Model NO:SLS-WHT-6851S110PP, CERA Cat No s1013132 and equivalent cat part in make Marc

S&F CP Toilet paper holder with flap cover fixing with all necessary arrangementsscres etc.., all as specified and as directed Make:- Jaquar model No: AQN-7753, CERA F5004110 and equivalent cat part in make Marc

S&F brass CP Angle /Stop cock with long shank and cup (concealed type) with wall flange 15 mm dia bore screwed down with crutch handle both end screwed for iron pipe or union as fixed in repairs, complete all as specified. Make:- Jaquar model No: LYR-CHR-38053, CERA F 4020101 and equivalent cat part in make Marc

S&F CP Towel Ring round with round flange (Jaquar model NO: ACN-BCH1121BN) including with all fixing arrangemetns and all as specified and directed. Make :- Jaquar model NO: ACN-BCH1121BN and equivalent cat part in make Marc, Cera

S&F looking mirror(900x600x6 mm) with frame and all as specified and directed Make :- Prayag (Model No : BLM-03F) and equivalent cat part specified in particular specification.

M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated, FRLS multistranded, single core unsheathed, copper conductor cables drawn through and including PVC conduit with all accessories concealled in wall and fixed to ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed,multi stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth dolly including sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc. for One light point / fan point/ Exhaust point controlled by one single pole one way switch, complete all as specified.

All as per item No, 75 but One 3 pin socket outlet 5 amps independent board with cable 1.5 Sqmm size, complete all as specified.

All as per item No. 75 but One 3 pin socket outlet 5 amps on the same board with other switches with cable 1.5 Sqmm size, complete all as specified.

All as per item No. 75 as above here-in-before but wiring with 2.5 sqmm copper cable and 2.5 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket out let on independent board complete all as specified and directed.

S&F Switch modular type 6 amps, 1 module single pole one way duly ISI marked, complete all as specified. Make-Anchor, Cat Part No-65001 or equivalent cat part in Plaza, INDOASIAN.

S&F Switch modular type 16 amps, 1 module single pole one way duly ISI marked, complete all as specified. Make-Anchor, Cat Part No-65007 or equivalent Cat part in Plaza, INDOASIAN.

S&F Socket outlet modular type 6A - 2 in 1,without shutter, 2 module, duly ISI marked, complete all as specified. Make-Anchor, Cat Part No-65202 or equivalent cat part in Plaza, INDOASIAN.

S&F Socket outlet modular type 16A, 3 pin combined, 2 module, duly ISI marked, complete all as specified. Make-Anchor, Cat Part No-65204 or equivalent cat part in Plaza, INDOASIAN.

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-39040 or equivalent cat part in Plaza, INDOASIAN.

S&F Lamp angle holder (Plastic Ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-39527 or cat part equivalent in Plaza, INDOASIAN.

S&F LED bulb of 9 watt, B22, 6500K all as specified and directed. Make- KCSAD, Cat Part No.KDB09 or equivalent cat part in Crompton/ Wipro/ Surya/ Havells

S&F 20W, 6500 K, 4 feet LED Square tube light fitting, energy efficient fixed to wall/ ceiling etc complete all as specified. Make- KCSAD, Cat Part No. KDT520 or equivalent cat part in Philips/ C&S/ Bajaj.

S&F Sheet metal enclosures doubledoor, factory made, made out of CRCA mild steel sheet 1.2 mm thick with matellic painting, IP-42 protection surface mounting 240 volts, 4 way dust and vermin proof suitable for incorporation of Isolator / MCBs. duly concealed in wall and making good the distrubed surface and colour matching complete all as specified.

S&F MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified. Make- Havells, Cat Part No- DHMGCSNF040/063 or equivalent cat part in INDOASIAN/ Legrand.

S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified. Make- Havells, Cat Part No- DHMGBSPF006-032 or equivalent cat part in INDOASIAN/ Legrand.

S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified. Make:-Crompton, Model.EXHD300-6-1 or equivalent cat part in Khaitan/CG/Bajaj

Cutting holes making good the distributed surface with PCC 1:2:4 type B1 and cement plaster in CM 1:4 grouting nuts for fixing of Exhaust fans complete all as specified and directed.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 Ltrs, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified.

S&F LED sleeky bldg street light (Lens) fitting of 35 watts, 6000K, including GI bracket bend to shape made out of GI pipe light grade of 25 mm, size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate, duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements to wall/ pole, including connecting up with 2 core copper flexible wire of size 23/00.0076 all as specified and directed. Make- KCSAD, Cat Part No. KDST35 or equivalent cat part in Philips/ Bajaj/ Havells.

S&F XLPE insulated, armoured, 1100 volts grade, heavy duty cable of size 10 Sqmm nominal cross section, 2 core, aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing with double compression copper stain less steel gland at DBs and testing, complete all as specified. Make-Gloster/ Havells/ Finolex/ Universal Cables

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. (Excavation and earth work measured separately).Note- Punned down thickness shall be measured.

S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified. (Excavation and earth work measured separately).

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to sxposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm complete all as specified and directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) .

M&L for cutting of existing GI tubing 40mm dia for making new conncetion, inserting un equal Tee 40X40X25mm dia including excavation, returning filling complete and all as directed and specified

Supply and laying GI tubing medium grade galvanised of size 25mm bore laid on floor/ceiling including all fittings and short pieces complete all as directed by Engineer-in-Charge.

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 25mm bore complete all as specified.

S.R. Kaura and Company

M/s Bansi Lal

Kissan contractor and engg works

M/S Yashpaul Gulati

Marwaha Builders

M/S Sandhu Const.Co.