REPAIRS/REPLACEMENT OF SANITARY FITTING, WATER SUPPLY, TILES, FLOORING IN OTM ACCN/MESS IN DOMESTIC AREA AND REPAIR TO JOINERY, TILING, PLASTERING, SANITARY FITTINGS, PLUMBING, ATT (POST CONSTRUCTION) AND CONNECTED MISC WORKS IN OMQ/SMQ BUILDING AT A

Amount

Supply only approved integral water proofing compound, Make : conplast x 421 IC of M/s Foroc Chemical (Inida) Ltd or its equivalent of make Dr Fixit/ STP Ltd.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc., 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L Cutting holes in brick/stone walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0 )( using 12.5 mm graded aggregate) ¸depth of embedded portion of hold fast not exceeding half brick

Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description

All as per item No 4 above but exceeding 1.5 sqm but not exceeding 4 sqm

Taking down shuttes of any description not exc 1 Sqm all as specified and directed.

Taking down shuttes of any description exc 1 Sqm and n.exc 2 Sqm, all as specified and directed.

Taking down shuttes of any description exc 1 Sqm but n.exc 2 Sqm and refixing in the same opening after necessary easing and cutting all as specified and directed.

S & F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

S&F 35mm thick 2 nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats.

S&F 30mm thick 2 nd class Hard wood Glazed and Skelton shutterswindow and ventilator, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(b) and fitted to chowkats.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed.

S&F for aluminium anodised, barrel tower bolt 100mm of extruded section.

S&F for aluminium anodised, barrel tower bolt 150mm of extruded section.

S&F for aluminium anodised, barrel tower bolt 200mm of extruded section.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extracted section and fixing bolt and sliding bolts of extracted section.

S&F Butt hinges of size 75mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed.

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed.

S&F Continuous(piano) hinges,mild steel,bright finish of electrogalvanised 30 mm width of flap.

S&F 300 mm ordinary rat rail rod pattern springs incl roller and roller plate complete.

S&F for aluminium handle 100mm cast type anodised.

S&F for aluminium handle 150mm cast type anodised.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed.

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed.

S & F framed work as grills conforming to Fe 290 Gde E-165

S&F steel work in tubular trusses including special shaped washer etc complete or butt welded tubes conforming to IS-1161-1979 graded St-240 all as specified and directed.

S&F powder coated anodised aluminium frame and shutters with all fixing arrangements for doors, windows and ventilators with one or more rebates including joing cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed.

S&F powder coated Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and rollers complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPs as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

M&L Cover fillets of standard 4.5 mm thick ness hard board, 40mm wide,and fixing with screws.

M&L Prelaminated particle board, 19 mm thick interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work as in repairs.

M&L 12mm thick block boards grade 2 quality, interior grade decorative type with decovative face veneer on one face, fixed with screws to timber frame work all as specified and as directed fixed in repairs

M&L 75 mm thick PCC 1:3:6 type C2 as in plinth protection and paving finishing surface even and smooth without using extra cement

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F glazed coloured ceramic tiles 300x200x 6 to 7mm thick as in vertical surface such as skirting, dado, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles incl 10mm thick plastering in CM 1:3 complete all as specified

M&L Glazed coloued Ceramic tiles of size 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over 10 mm thick plaster in CM 1:4 finished all as specified and directed .

M&L for non skid coloured ceramic tiles 7 & 8 mm thick area of ech tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screedd bed 15 mm thick in CM (1:6) complete all as directed and specified.

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles exceeding 0.11 sqm but not exceeding 0.18 Sqm as in flooring over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Vitrified tiles of light shade 10mm thick and area of each tiles not exceeding 0.36 Sqm for flooring over 15 mm thick screed bed in CM 1:6 all as specified and directed.

M&L for Granite(of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishingtypes over 20mm thick screed bed in CM 1:6 all as specified and directed.

Taking down cement plaster from walls of any description all as specified and directed.

M/L 15 mm thick cement plaster in CM (1:6) on fair faces of brick work or concrete surfaces including finished the surface even and smooth (without using extra lime or cement).

M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls

Material and labour for rendering 15mm thick (average) in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement. Note:- supply only of water proofing compound will be measured and paid seperately under relevant item

M&L for Complete removal of existing surface finish and applying 1-2 mm thick wall care putty at wall and ceiling surfaces all as specified and directed.

M&L for applying two coats of distemper (OBD) including Preparation to the new surfaces of wall, all as specified and as directed

Preparation of newly plastered surfaces and applying two coats of cement base paint on walls incl priming surfaces with alkali resistant priming paint etc complete all as specified and directed.

M&L for Complete removal of existing wall surface finish and applying two coat of oil bound distember all as specified and directed.

M&L for preparation of existing wall surface finish and applying one coat of oil bound distember all as specified and directed.

M&L for preparation of existing ceiling surface and applying one coat of oil bound distember all as specified and directed

M&L preparation of surface and applying two coat of White wash on old wall surface all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete glazed with oil putty or fixed with beeds.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane all as directed by Engineer-in-Charge

S&F sheet glass ordinary quality 4.8mm thick as in window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasket all as directed by Engineer-in-Charge

All as item 57 above but figured glass pin head type.

M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M&L Preparing old painted wooden surface and applying one coat of Synthetic enamel Paint all as specified and directed.

M&L Preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint over one coat of red oxide zinc chrome to steel surface all as specified and directed.

M&L Preparing old painted steel surface and applying one coat of Synthetic enamel Paint all as specified and directed.

Supply and Fixing in repairs vitreous china corner wash basin, white or coloured of size 395 x 395mm including brackets all as specified and as directed. Make : Cera/ Parryware/Neycer/Jaquar

Supply and Fixing in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with padestal including brackets all as specified and as directed. Make : Cera/ Parryware/Neycer/Jaquar

S&F in repairs for vitreous china Under Counter sunk Modular wash basin white flat back size 190X550X430mm including fixing of 32mm low density polylethyne pipes (LDPE) of pressure rating 6kg/cm2,coupling, directeded by Engr in Charge Make: Cera/ Parryware/Neycer/Jaquar

Taking up or down 15mm steel tubing and connections all as specified and directed.

All as per item No 66 here-in-before but 20mm bore

S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified. Make : Cera/Jaguar/Ess Ess.

S&F 15 mm dia bib cock wall flange (fancy type), cast copper alloy with with screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make: Jaguar (Code-VGP - 81037) or Equivalant in Cera/Ess Ess.

S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make : Cera Model F2002161 or equivalent in Jaguar/Ess Ess

S&F Angle cock with wall flange 15 mm dia Fancy type Make: Jaguar, Cat Part No - VGP-81053 or or Equivalant in Cera/Ess Ess.

S&F in repairs 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions and fixed. Make: Jaguar/ Cera/ Ess Ess.

S & F in repair Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” completed all as specified. Make : Cera/Parryware/Neycer

S&F in repairs Stop valve 15mm dia, concealed type chromium plate fancy type with long shank and cup complete all as specified fixed in repair. Make : Cera/Jaguar/Ess Ess.

S&F in repair brass Chromium plated wash hand basin mixer tap 15 mm bore. Make: Cera, Jaquar , Marc & Hindware as per Sample and directed by Engr -in Charge Make :- Cera/ Jaquar/ Ess Ess.

S&F Wall mixer non telephonic Shower arrangement with connecting legs & Wall flanges, fixed in repairs. Make: Jaguar, Cat Part No - CON-219KN or equivalent in Cera/ Ess Ess.

S&F Sink cock in repairs fancy type complete all as specified and (table mounted)with 215 mm swivel spout complete all as specified and as directed. Make: Cera F2003302 or equivalent in Jaguar/ Ess Ess.

S&F in repair Ball Brass valve 25 mm dia high pressure, with polythene float and flynut complete all as specified and as directed. Make: Leader/ Zololo/ Prayag

S&F for Waste cupling for sink of 125mm dia complete all as specified

S&F in repair bib tap of PTMT any colour of size 15mm dia complete all as specified. Make: Prayag/ Polytuf or equivalent make as approved by GE

S&F Soap Dish all as specied and directed by Engr-in-Charge. Make : Jaguar (Code No ACN-1131N) or Equivalent

Supply and Fixing of 32mm waste pipe for wash hand basin all as specified and as directed

S&F for PTMT Waste cupling 40mm dia complete all as specified

S&F in repairs CP grating size 100mm all as specified and directed.

S&F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed. Make : Cera/Jaguar/Ess Ess.

S&F Despenser with glass bottle fixed with and including Chromium plated brass screws and wooden/ plastic cleats, as specified and as directed. Make: Jaguar cat Part no ACN-1135N or equivalent as approved by GE

S&F CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed in repairs. Make : Cera/Jaguar/Ess Ess

S&F CP Towel rail of including fiitings of neccessary screws etc complete all as specified and directed by the Engr-in-Charge. Make: Jaguar (Code-AKP-35711PS). or Equivalent

S&F brass chromium plated bottle trap 32mm bore for wash hand basin with inlet and outlet and screwed for pipe or all as specified, fixed as in repairs complete all as specified and directed by Engr-in-Charge. Make : Cera/Jaguar/Ess Ess/

S&F in repair Towel Rack with lower hanger (stainless steel), fixed in repairs, complete all as specified and directed. Make : Cera/Jaguar( Code No AHS-1581H)/Ess Ess

S&F CP Towel Ring of including fiitings of neccessary screws etc complete all as specified and directed by the Engr-in-Charge. Make: Jaguar or Equivalent

S&F Paper holder with Flap Recessed Type (Stainless steel), all as spd and directed by Engr-in-Charge. Make : Jaguar (Code No AQN-7753) or Equivalent as approved by GE.

S&F CP health fauccet of including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge. Make: Jaguar (Code-ALD-577) or Equivalent

S&F in repairs of CP health fauccet of Cera make including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge. Cera Make-F-8030103 or equivalent

S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin of cera all as specified. Make: Jaguar cat Part no AKP-35771P or equivalent as approved by GE

S & F corner glass shelf with assy of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, as specified and as directed. Make: Jaguar cat Part no ACN1173 or equivalent as approved by GE

S&F in repairs corner Glass shelf of cera make including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge. Cera Model F-5005102 or equivalent

S&F 20 mm dia of CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

S&F CPVC pipes 25 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling or laying in floor including fitting in floors all as specified and as directed by Engr in Charge.

Supply and Fixing in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed .

S&F PVC(SWR) Pipes 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors

S&F PVC(SWR) Pipes 110mm dia single soketed, in any length with rubber ring joints, fixed to wall

S&F PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S&F in repairs PVC (SWR) Pipes 75mm dia single soketed, in any length with rubber ring joints, fixed to wall

S&F PVC floor trap 110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S&F PVC(SWR) floor trap 75mm dia, with grating including jointing to waste pipe fixed in solvent cement

S & F PVC (SWR) bends 75 mm dia in any radius with access etc.

S & F PVC (SWR) bends 110 mm dia in any radius with access etc.

S & F PVC (SWR) bends 110 mm dia in any radius

S & F PVC (SWR) branch piece single 110mm Dia (single 'Y') equal or unequal with access door including creating necessary provn in the existing PVC waste inlcuding jointing with rubber washer and solvent clamps etc.

S&F in repairs Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm all as specified and directed. Make : Nirali/ Diamond/ Blue star

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm® omplete all as approved by Engr-in-Charge. Make : Nirali/ Blue star/ Diamond

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed. Make : Cera/ Parryware/ Neycer

Supply and Fixing in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe fixed in repair all as specified and as directed. Make : Cera/ Parryware/ Neycer

S& F in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directed at site. Make : Cera/Jaguar/Ess Ess.

S&F in repair to over head shower square shape single flow (Body and face plate stailess steelwith chrome finish) with rubbish cleaning. Make :- jaquar Cat part No OHS-CHR-1629 or equivalent

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including p'trap and provision of cement concrete for good making surface complete all as specified & directed by Engr-in-charge . Make: Cera/Parryware/Neycer

S&F plastic pedestal pattern seat cover with flat bottom and cover and MS chormium plated hanging type device all as specified and directed. Make : Cera/Parryware/Neycer

S&F in repairs Single Piece EWC with cistern, soft close seat cover and twin flushing fittings of size wash down water closet (pedestal pattern) of any colour including fixing of bolts complete all as specified and directed by Engr-in-Charge. Make: Jaguar cat part no VGS-WHT-81851PN or equivalent as approved by GE

S&F Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with brackets, and union for discharge pipe fixed in repair, complete all as specified. Make: Cera/Parryware/Neycer

S&F PVC bathroom Cabinet mirror of size 500x400mm including fixing screws complete all as specified and directed. Make: Prayag Cat No-556 or equivalent as approved by GE

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level).

M&L for repairing of 40mm thick flooring in patches with PCC (1:2:4) 20mm graded stone agg. & finished even & smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling of Asbestos cement corrugated or semicorrugated sheets in roof coverings, all as specified and directed.

Demolition and breaking up drain pipes ( salt glazed ware , AC, PVC or reinforced conc ) set in cement mortar of internal dia 75-110mm incl any earth work and demolition of PCC, complete all as specified.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & complete 15mm thick screed bed in CM 1:4 , all as spd & directed.

Demolition of brick work or stone masonry built in CM incl all quions all as specified

S&F for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threaded type cover complete all as specified and directed by Engr-in-Charge. Make: Sintex/ Polycon/ KAVERI

S& F fly proof door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed by Engr - In Charge. (Note; manufacture MAXON,

S& F flush door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed by Engr - In Charge. (Note; manufacture MAXON,)

S&F in repairs Decorative wooden finished curtain rod mild steel chromium plated of 20 mm dia all as directed and specified by Engr in charge.

S&F decorative wooden finished type chromium plated double brackets supports for holding curtain rods and corners to be fixed to ends of curtain with screws complete.

S&F in repairs ISI marked hydraulically regulated door closer designation no.03 universal type,suitable for door shutters of 851 to 1000 mm in width and weight betwwen 61 to 80 kg width upto 1.50 mm mtr and weight between 61 to 80 kg complete all as specified and directed by Engr-in-Charge..

S&F in repair Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr . ( Make :NIRALI,Blue star,Nilkhant or equivalent as approved by GE.)

M & L for providing and injecting chemical emultion for post construction antitermite along the external of wall below concret or masonary apron using chemical emultion at the rate of 2.25 litre per linear meter including drilling and pluging holes etc complete all as specified and directed.

M & L for Removing the existing unserviceable tar felt or any type of felt of any description from roof slab alongwith screed bed, including cleaning the surface & removing the debris to a distance exc 250m and n.exc 500m, etc complete all as specified & directed.

M&L Applying oil bounded bitumen primer @ 0.20 Kg/Sqm, and providing 4mm thick APP modified water proofing membrane weighing not less then 4.0 Kg/Sqm, reinforced with non woven polyester matt weighing not less then 160 gm/sqm having softening point not less then 150 degree centigrade, having tensile strength of 650 N/5 cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforcement, trearing strength of 180 N by torch- on application including min 10cm side over lap & 15 cm end laps. Applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg/sqm as per the detailed specifications. Note : The laying/ applying of APP membrane and other connected work shall be carried out by the approved applicator of the manufacturing company of APP membrane.

Mahant Construction Co.

S SUDHAKAR

chowdeshwariconstructionco

Thirumala Construction

SRI AYYAPPA ENTERPRISES

GOVINDARAJU INTERIOR DECORATION

JyothsnaNursery

JITHU CONSTRUCTION COMPANY

Eeguchi Constructions