WBPWD/EE/PMED/NIQ-48/e-Q /2022-2023

Amount

Supply & Delivery of 4 core 10 sq.mm 1.1 kv.gr.XLPE insulated 1100V Grade as per IS 7098 (part 1) 1988 armoured sheathed Aluminium conductor cable. [Make - Polycab/ Havells/ Gloster/ carrency]

Laying of one No. 4 core 10 sq.mm cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of 4 core 10 sq.mm 1.1kv grade xlpe insulated Al/A cable as below, after cutting floor/ pavement/ wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.

S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entryof XLPE/PVC armoured cable and Finishing the end of the XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & joiting materials.

a) 4 core 10 sq.mm.

b) 4 Core 95 sq mm (existing)

S & F medium gauge 40mm dia GI Pipe for protection (ISI Medium) with necessary fittings and jointing materials as req.

Supplying and fixing 250 V, 6-10A per way, (2+4) SPN MCBDB with SS enclosure double-door with IP-42/43 protection with DP Isolators as incomer and SPMCBs ('C' Curve, 10kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment,1 no. 40A DP MCB type Isolator, 4 no. 6-16A SPMCB. (Make- Siemens(8GB32102RC06)/ Schneider/ Legrand)

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works....19 mm dia 3 mm thick polythene pipe without earth continuity wire.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make- Policab/ Havells/ Gloster/ KEI) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.

a) 3 x 22/0.3 (1.5 sqmm) as ECC

b) 2 x 36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

c) 2 x 56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

d) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. as per G S

a) 2.5sqmm

b) 4.0sqmm

c) 6.0sqmm

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Make- Legrand/ Goldmadel/ North West) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Power Plug)

Supply & Fixing 240 V, 25 A, Modular type starter (Make- Legrand/ Goldmadel/ North West) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

Inter connection of Street fittings by 2 x 1.5 Sq. mm. PVC insulated copper wire from loop box with 19mm bore PVC polythine pipes as per direction of EIC.

Charge for Reparing of Glow sign board incl. necessary connection for tube light fittings with 2 x 1.5sq. mm. cu wire as per direction of EIC.

Supply & fixing 20W LED tube on existing fittings. Make- Crompton, cat no.- LTT8-20/ Philips/ Bajaj/ havells)

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. (Upto 9.0 mtr. long pole) (i) 1st coat of aluminium paint over 1 coat of RO priming. (ii) 2nd coat of aluminium paint over 1st coat

Supply & Delivery of 1700 VA, Single Phase ,230 V,50 HZ inverter (make: microtek, model- Super Power 1700 (24V) DG, / Equivalent make)

Supply & Delivery of 12 V.,150 AH Rechargeable battery Model no: IT 500(36), Exide/ amaron quanta)

Supply & delivery and Installation of Special Type of Trolley made of suitable size angle iron frame with two number Sheet metal table platform suitabe for accomodation of two number Battery and Inverter.

Supply & Delivery of split type fixed speed, Non-Inverter Air conditioning machine having the following specification :Rated EER: 3.59,Compressor Type: Rotary, Min. Cooling Capacity (Watts): 5200, Max. Power Input (Watts) : 1450, Airflow rate for indoor unit(CFM.): 777, Nano Platium filter, powerful cool and wide & long airflow Air Sleep Cooling Technology, LCD remote control, Electronic metal housing box, 12 hour on and off timer, auto restart, auto swing, fan speed option (low/medium/high) etc. Refrigerant-R410A. Min. BEE Star rating : 2 star, Min.Tonnage 1.5 TON [Make- Mitsubishi Electric-MS/MU-GK18VA./ O General]

Installation,Commissioning and testing of 2.0/1.5 ton split type AC machine both indoor/outdoor including fixing of 40 x 40 x 5 mm MS angle iron frame and mending good the damages.

Supply and delivery of (I) Copper pipe 3/8"/1/2" for liquid as required. (II) 3 core 2.5 sqmm. Cu. cable (III) Copper pipe 5/8" / 1/4"for suction as required (IV) Insulation Foam 3/8" / 1/2" for liquid as required. (V) 5/8" / 1/4"for suction as required.

Dismentling of old unused signboard by own tools & tackles.

Supplying and fixing 415V, 100A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make- L&T/ Siemens/ Schneider)

Supplying and fixing 415V, 63A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make- L&T/ Siemens/ Schneider)

Supplying and fixing 415V, 32A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make- L&T/ Siemens/ Schneider)

Disconnect The existing cable from both side existing pannel and reconnect the new 95sqmm Cable to both side existing pannel incl the megar test for all cables by expart

Checking, testing the existing distribution wiring, power plug, power distribution wire/cable etc. by expert electrician and restore the problem as per direction of EIC

M/S JOGMAYA ENTERPRISE

M/S SREE GURU CONSTRUCTION