Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.8 CrAccepted-AOC DCG1 0102 DLF CORPORATE GREEN SECTOR 74A SECTOR 74A GURGAON HARYANA 122004 UDYAM HR 05 0010398 06AAFCA3979G2ZI R M MSME STATUS AS VERIFIED | GURUGRAM | HARYANA | 122004 | ₹4.8 Cr Quoted ₹4.9 Cr | L1 | Accepted-AOC Accept |
| 2 | L2₹5.5 Cr+₹58.4 L (12.0%)Rejected-Finance F NO C 102 KUSHAL VIHAR S NO 84 1 19 JAWALKAR NAGAR PIMPLE GURAV PUNE MAHARASHTRA 411061 | PUNE | MAHARASHTRA | 411061 | ₹5.5 Cr+₹58.4 L (12.0%) | L2 | Rejected-Finance Disqualify |
| 3 | Not Admitted-Fee/PreQual/Technical OFFICE NO 301 VASANTASAKHA PLAZA NARHE PUNE MAHARASHTRA 411041 | PUNE | PUNE | MAHARASHTRA | 411041 | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | SHREE VENKATESHWARA TURNKEY PROJECT SOLUTION PVT LTD L2 | Adhunik Powertech Private Limited L1 |
|---|---|---|---|---|---|
| 1.00AIR WASHER :- Supply, Installation, testing and Commissioning of floor mounted double skin type air washer units with minimum 90 % saturation efficiency made of 46 mm thick panels consisting of pre-plasticized SS casing of thickness 0.8 mm outside layer and 0.8 mm thick plane SS sheet at inside layer with polyurethane foam (PUF) insulation with density of 40 kg/cum. factory injected between them by injection moulding machine, complete with 46mm thick HDPE prefilter, 200mm deep cellulose pad , water distribution header, indigenous pump, internal piping GI 'B' class, valves & fittings, MS water tank with FRP lining, DIDW centrifugal forward curved fan and fan motor ( EFF-1) with IP-55 protection suitable for 415 +10% volts, 3 phase, 50 Hz A.C supply , V-belt & drive set vibration isolators quick fill, make up, drain, overflow connection and TP isolator with MS enclosure box complete in all respects etc. The unit shall be of following capacities with 65 mm WG static pressure | |||||
| 1.01 | 42500 CFM 65 MMSP (Main Kitchen) | 3 | Nos. | 28,42,782 ₹85,28,346 | 16,06,500 ₹48,19,500 Lowest |
| 1.02 | 20000 CFM 65 MMSP (1st Floor) | 1 | Nos. | 16,02,634 ₹16,02,634 | 11,45,435 ₹11,45,435 Lowest |
| 1.03 | 40000 CFM 65 MMSP (Boondi Kitchen) | 1 | Nos. | 22,91,400 ₹22,91,400 | 17,65,770 ₹17,65,770 Lowest |
| 1.04 | 50000 CFM 65 MMSP (Boondi Kitchen) | 1 | Nos. | 32,11,940 ₹32,11,940 | 22,25,368 ₹22,25,368 Lowest |
| 2.00Exhaust Air Scrubber :- Supply, Installation,Testing & Commissioning of Floor Mounted Dry Air Scrubber each comprising of extract air intake section, electrostatic precipitation technology, dry type air cleaner to remove odour, smoke & fumes from exhaust air. Electrostatic section shall be made of 22 gauge Stainless Steel sheet, high bake epoxy powder coated, washable type aluminium mesh filters, stainless steel spiked ionizers to create high voltage DC field, aluminum collector plates which should be alternatively charged positive and negative with large collecting area with 14" deep cell, to work as magnet for charged smoke & oil particles. Average efficiency of 90-95% in single pass as per DOP test method. Electrostatic Precipitator should be able to charge particles from 0.01 micron to 10 microns through solid state power supply. Collector cell should be of permanent type and incorporate slide out facility for easy removal for cleaning. The system should be fitted with interlock switch for safety . The system should allow connection to a fan section to achieve 500 FPM velocity across the air cleaner. | |||||
| 2.01 | 50000 CFM 80 MMSP (Main Kitchen) | 3 | Nos. | 31,03,366 ₹93,10,098 | 30,85,300 ₹92,55,900 Lowest |
| 2.02 | 23900 CFM 80 MMSP (1st Floor) | 1 | Nos. | 12,65,211 ₹12,65,211 Lowest | 14,44,000 ₹14,44,000 |
| 2.03 | 34000 CFM 80 MMSP | 1 | Nos. | 19,73,747 ₹19,73,747 Lowest | 20,05,450 ₹20,05,450 |
| 2.04 | 42500 CFM 80 MMSP | 1 | Nos. | 22,77,666 ₹22,77,666 Lowest | 30,00,110 ₹30,00,110 |
Tender Value
Refer Docs
EMD Value
₹5 L
Closing Date
6 Apr 2026, 5:00 pmClosed
Chief Executive Officer
Shree Saibaba Sansthan Trust, Shirdi
Supply, Installation, Testing And Commissioning Of Air Ventilation And Exhaust System With Buy-Back Scheme At Saiprasadalaya Kitchen, Shree Saibaba Sansthan Trust, Shirdi
2026_SAI_1285741_1
SSST/ Mechanical /2026/ 29 / Air Ventilation and Exhaust System
Open Tender
Miscellaneous Works
Item Rate
180 days
Shirdi
Please Refer Tender Document
2 documents required · 2 mandatory
₹10,000
₹5 L
Sai Sabhagraha Meeting Hall.
23 Jun 2026
16 Mar 2026
8 Apr 2026
16 Mar 2026
6 Apr 2026
25 Mar 2026
23 Mar 2026
AIR WASHER :- Supply, Installation, testing and Commissioning of floor mounted double skin type air washer units with minimum 90 % saturation efficiency made of 46 mm thick panels consisting of pre-plasticized SS casing of thickness 0.8 mm outside layer and 0.8 mm thick plane SS sheet at inside layer with polyurethane foam (PUF) insulation with density of 40 kg/cum. factory injected between them by injection moulding machine, complete with 46mm thick HDPE prefilter, 200mm deep cellulose pad , water distribution header, indigenous pump, internal piping GI 'B' class, valves & fittings, MS water tank with FRP lining, DIDW centrifugal forward curved fan and fan motor ( EFF-1) with IP-55 protection suitable for 415 +10% volts, 3 phase, 50 Hz A.C supply , V-belt & drive set vibration isolators quick fill, make up, drain, overflow connection and TP isolator with MS enclosure box complete in all respects etc. The unit shall be of following capacities with 65 mm WG static pressure
42500 CFM 65 MMSP (Main Kitchen)
20000 CFM 65 MMSP (1st Floor)
40000 CFM 65 MMSP (Boondi Kitchen)
50000 CFM 65 MMSP (Boondi Kitchen)
Exhaust Air Scrubber :- Supply, Installation,Testing & Commissioning of Floor Mounted Dry Air Scrubber each comprising of extract air intake section, electrostatic precipitation technology, dry type air cleaner to remove odour, smoke & fumes from exhaust air. Electrostatic section shall be made of 22 gauge Stainless Steel sheet, high bake epoxy powder coated, washable type aluminium mesh filters, stainless steel spiked ionizers to create high voltage DC field, aluminum collector plates which should be alternatively charged positive and negative with large collecting area with 14" deep cell, to work as magnet for charged smoke & oil particles. Average efficiency of 90-95% in single pass as per DOP test method. Electrostatic Precipitator should be able to charge particles from 0.01 micron to 10 microns through solid state power supply. Collector cell should be of permanent type and incorporate slide out facility for easy removal for cleaning. The system should be fitted with interlock switch for safety . The system should allow connection to a fan section to achieve 500 FPM velocity across the air cleaner.
50000 CFM 80 MMSP (Main Kitchen)
23900 CFM 80 MMSP (1st Floor)
34000 CFM 80 MMSP
42500 CFM 80 MMSP
Chiller Supply, installation, Testing & Commissioning of nominal cooling capacity - 18.8 TR Air Coolled Scroll Chiller Package complete with 2 Nos. of hermetic scroll type compressor - each with microprocessor based control panel, motor, starter panel, machine mounted air cooled condensers, insulated chiller, water flow switch, vibration isolators. Refrigerant gas used shall be R410a of following specifications : Cooling Capacity : 18.8 TR Water Flow : 49.7 US GPM Power Unit : 20.3 Kw Compressor Type : Hermetic Scroll X 2 Refrigerant Type : R410a
Ducting Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
Main Kitchen
0.63 mm (24 guage)
0.80 mm (22 guage)
1st Floor
0.63 mm (24 guage)
0.80 mm (22 guage)
Boondi kitechn
0.63 mm (24 guage)
0.80 mm (22 guage)
Duct Insulation :- Supplying , installation, testing & commissioning of external thermal insulation on ducts with Duly laminated aluminum foil of mat finish Closed Cell Nitrile Rubber (class “O”) insulation after applying of suitable adhesive for nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specification 9 mm thick Closed Cell Nitrile rubber insulation with Factory Laminated Aluminium Foil for Supply Air Duct
Main kitechen + 1st floor
Boondi kitechn
Air Grills :- Supply, fixing and commissioning of powder coated extruded aluminium 300X300 size fresh air grills with damper complete with nuts, bolts, screws etc.
Main Kitchen
1st Floor
Boondi kitechn
Supply & fixing of Powder Coated Aluminium Grills/Diffusers with Volume Control Dampers
Kitchen Hood :- Supply, Installation, Testing & Comissioning of SS Exhaust Hood with Baffle type Filter one side SS Grade 304 & 18 Guage (1.2 mm) of SS Filter size 500X500 with or without 2 LED Light of following sizes, the rate should be inclusive of transportation, labour, loading & unloading and extra expenses if any
Electical Panel : Supply, Installation, Testing Comissioning of Powder Coated Electrical Control Panel for Air Washer of the following specifications with test certificate: Voltage Range : 380-480V Phase- 3 Phase Frequency : 50-60 Hz Power Rating : 5KW to 15KW Main Circuit Breaker : MCCB Motor Protection : Speed Control, Soft Start, Overload Protection, Overvoltage, Phase Failure Relay Contractor : High-Quality 3 Phase Contractor Control System : PLC for Automation and Sequencing with user-friendly control and monitoring Controller : EC Fan Motor Controller for Variable Speed Control and related accessories Safety Control : Waterproof, Shockproof
Electrical Control :- Supply, Installation, Testing Comissioning of Powder Coated Electrical Control Panel for Air Scrubber of the following specifications with test certificate: Voltage Range : 415V Phase- 3 Phase Main Circuit Breaker : MCCB 32A Breaking Capacity 25kA Overload Relay : Adjustable for 16-20A Motor Protection : Speed Control, Soft Start, Overload Protection, Overvoltage, Phase Failure Relay Contractor : AC3 Duty Rated 32A Busbars : Copper or GI with capacity of 25A Components : Push Button for Start/Stop, Indicator Lamps (On/Off, Fault), Emergency stop Switch, Timers for star-delta or soft start operation Safety Control : Waterproof, Shockproof
Supply, Installation, Testing and Commissioning and laying of following 415 volts grade PVC insulated sheathed copper conductor unarmoured control cables in existing conduit,OR clamped on wall with suitable saddles, cable tray fixing bolts, including testing and commissioning as per site requirement.
3 Core 2.5mm Flexible Copper Control cable for Air Washer Electrical Panel
3 Core 1.5mm Flexible Copper Control cable for Air Scrubber Electrical Panel
Item Rate BoQ
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
Buyback existing Air ventilation & Exhaust system with electric pannel and ducting etc.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
BOQ_2211059.xls
BOQ • 0.32 MB
Tender_Document_2026_29_Air_Ventilation_And_Exhaust_System.pdf
Tender Documents • 1.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .