Construction of office Building for Doppler Weather Radar at Jot

Amount

Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing including all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in foundation, footing, basis of columns etcetra and mass concrete including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including , carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work of grade M-20 (M-Twenty design mix) to obtain the minimum compressive strength of 20N/square MM (Twenty newton per square millimetre) with cement contents not less than 330 Kg/Per cubic metre ( Three hundred thirty kilograme per cubic metre) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundations, footings bases of columns and the like and mass concrete including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed & vibrated cement concrete work of grade M-20 (M-Twenty design mix) to obtain the minimum compressive strength of 20N/square MM (Twenty newton per square millimetre) with cement contents not less than 330 Kg/Per cubic metre ( Three hundred twenty kilograme per cubic metre) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts upto floor all levels as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed & vibrated cement concrete work of grade M-20 (M-Twenty design mix) to obtain the minimum compressive strength of 20N/square MM (Twenty newton per square millimetre) with cement contents not less than 330 Kg/Per cubic metre ( Three hundred twenty kilograme per cubic metre) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landing, shelves and their support, balconies, beams, girders, bressumers and cantilever upto floor all levels as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone agreegate 40 mm (forty millimetre) nominal size) and curing complete excluding the cost of form work in foudation and plinth including carriage of material, within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40 mm (forty millimetre) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth including carriage of material, within all leads and lifts within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing tor steel reinforcement TATA made for reinforced cement concrete work including straightening, bending, binding and placing in position complete as per the directions of the Engineer-in-charge including carriage of material, carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed / brought to courses ) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto twelve graded stone agreegate 20mm (twenty millimetre) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Stone filling dry hand packed tightly in floor complete including all taxes and carriage of material, as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Second class brick work using common brunt clay building bricks of approved quality in super structure above plinth level upto floor all levels in cement mortar 1:6 (one cement isto six sand) curing complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Half brick masonry using second class common brunt building brick of approved quality in super structure above plinth level upto floor all levels in cement mortar 1:4 (one cement isto four sand) curing complete including and carriage of material, as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 35mm (Thirty five millimetre) thick phenol bonded flush door shutter ISI marked No, 2202 of kit ply or equivalent with 1mm (one millimetre) thick PGI sheet lining on one side including bright finished black enamelled iron hinges with necessary screws of approved drawing ,design and specification including all taxes,GST, and as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing & fixing 8 mm ( eight millimetre) thick bison board of approved make ceiling fix to frame with necessary screws/ clamps excluding the cost of frame work of approved drawing ,design and specification including all taxes,GST, and as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetra complete 300 X 16 mm ( three hundred into sixteen millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 150 X 10 mm (one hundred fifty into ten millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 125 mm (one hundred twenty five millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing water proof stain and impect resistent heavy duty vetrified tiles of Bell-orient/ KAJARIA/ 600mm X 600mm (six hundred millimetre into six hundred millimetre) of aprroved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto floor all level as per approved drawing, design & specification or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government .

Providing and laying spartic ceramic tiles grade IV of Kajaria / Orient bell 5.5mm (five point five millimetre) thick 300mm X 300mm (three hundred millimetre into three hundred millimetre) size in flooring, treads of steps laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 ( one cement isto three sand) finished with flush pointing in white cement including carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-chief and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government .

White glazed tiles 6mm (six millimetre) thick in skiriting or risers of steps and dado on 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) finished with flush pointing in white cement as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing angle iron door, window, clerestory window frame manufactured from steel iron section of 40x40x6mm (forty millimetre into forty millimetre into six millimetre) with M.S. flat in combination of 50x4mm ( fifty into four millimetre) including hinges jamb, lock jamb, beed and if required angle thrashold of mild steel angles 50x25mm (fifty millimetre into twenty five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel but hinges 2.5mm (two point five millimetre) thick with provision for locking arrangement and shock obsorber as specified and applying a coat of approved steel primer after preteatment of the surface as per specification as dirceted by Engineer-in-charge within all leads and lifts and as per the direction of the Engineer-in-charge including all taxes, GST ,cariage of material and other incidentals.

Providing and fixing steel door, windows, ventilaters and clerestory windows frame manufactured from M.S. channal 75x40mm (Seventy five into forty millimetre), size vertically welded with M.S. flat 75 X 4mm (Seventy five into four millimetre) for central frames with split to end tail to each jambs including joints and miterd and welded with 16 X 3.15mm (Sixteen into three point five millimetre) lugs 10cm (ten centimetre) long embedded in cement concrete block 15cm X 10cm X 10cm (Fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate twenty millimetre nominal size) with provision for locking arragnement and shock observor fixed with by mechanical means lugs and curing complete including applying a coat of approved steel primer after pretreatment of the surface as specified within all leads and lifts as per the direction of Engineer-in-Charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in trusses and trusses purlins in building including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheets roofing made of cold rolled steel roll with spray coating of 25 micron with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five micron) primer coating and back coat of polyster of 5 microns (five micron) over 5 microns (five micron) primer coating of TATA durashine including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required including carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-chief and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing ridges or hips 60cm (sixty centimetre) overall 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing having proper gola shape with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five microns) primer coating and back coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating of TATA durashine including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required including all taxes, carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-chief and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing double rebate steel windows side hung one glazed and other wire gauge of standard rolled steel sections joints mitred and welded with mechanical means to relevent ISI standard specification frames and in M.S. Tee section 25X15X3mm (twenty five millimetre into fifteen millimetre into three millimetre) including glazing clips or pins, glass panes, M.S. wire mesh 4 designation 85 (eighty five) SWG and M.S. fitting as required including providing and fixing of projecting, hinges, tower bolts, handles, hooks and eyes, presty, locking arrangment spring catch etcetra and providing and fixing wire mesh fly proof including fixing with special metal sesh putty of approved make complete including applying a priming coat of red lead paint within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing M.S. plain grills 10x10mm (ten into ten millimetre) square or round bars in combination of 20x4mm (twenty into four millimetre) M.S. flat as per detail of required pattern in frames of windows etc.with M.S.Flats, square or round bars with round headed bolts and nuts or by screws including all taxes and carriage of materials within all leads, lifts as per specification as per the direction of the Engineer-in-charge and other incidentals. within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with Readymixed paint brushing wood primer pink as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Painting two coats (excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint other than white as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Painting two coat (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter With white readymixed paint within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

15mm (fifteen millimetre) cement plaster in single coat on rough side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Applying Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete as per the directions of the Engineer-in-charge including all taxes ,GST , carriage of material within all leads and lifts and other incidentals.

Finishing walls with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing under layer for plinth protection of 75 mm (seventy five millimetre) thick (unconsolidated) bed of dry brick / stone agreegate 40 mm (forty millimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing plinth protection 50 mm (fifty millimetre) thick in cement concrete 1:3:6 (one cement isto three sand isto six graded stone agreegate 20 mm(twenty millimetre) nominal size) within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall 15 X 23 cm (fifteen into twenty three centimetre) in cement mortar 1:6 (one cement isto six sand) and inside plastering with cement mortar 1:3 (one cement isto three sand) including earth work and laying 10 cm (ten centimetre) cement concrete in 1:5:10 (one cement isto five sand isto ten graded stone agreegate 40 mm (foty millimetre) nominal size) and 7.5 cm (seven point five centimetre) cement concrete 1:2:4 (one cement isto two sand isto four graded stone agreegate 20 mm (twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor 15 mm (fifteen millimetre) nominal bore including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying in trenches galvanised mild steel tubes (medium grade) tube fittings (Earth work in trenches to be measured and paid for separately) 15 mm (fifteen millimetre) nominal bore including all taxes, carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and placing in position 500 (five hundred ) litres net capacity PVC water storage tank of sintex ISI 12701 marked G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting upto all heights above ground level.as per the directions of the Engineer-in-charge including all taxes carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket of supreme make , waste and ventilating pipes ISI marked including fixing with approved adhesive 110 mm (one hundred ten millimetre) dia as per the directions of the Engineer-in-charge including all taxes carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket of supreme make , waste and ventilating pipes ISI marked including fixing with approved adhesive 75 mm seventy five millimetre) dia as per the directions of the Engineer-in-charge including all taxes carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing PVC 110x90mm (one hundred ten into ninety millimetre) dia floor trap ISI Marked of self cleaning design including fixing with approved adhsive, cost of cutting making the walls and floors etc. complete including all taxes, carriage of material within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing vitreous of hindware make vitreous China wash down matrix water closet (European type W.C. pan) EWC of hindware / cera of size 57x35x39 cm. with attached PVC cistern (sleek plus) and fixed with Jet pressure.as per specification as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing PTMT coloured/ white high density polythene / poly prolylene 10 litre (ten litre) capacity low level P.V.C. cistern plus) flushing cistern with a pair of C.I. or M.S. brackets complete with fitting such as lead valve syphon, 15mm (fifteen millimetre) dia PVC wall valve , coupling for connection with inlet, outlet and overflow pipes 40mm (forty millimetre) dia C.P. flush bend including cutting holes and making good the same (overflow pipe to be measured and paid for separately) as per specification as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing plastic seat (Solid) type and cover for wash down water closet with C.P. Brass hinges and rubber buffers as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing vitreous China wash basin of Hindware with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings Flat back 630mm X 450 mm (six hundred thirty millimetre into four hundred fifty millimetre) as per the directions of theEngineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing C.P. brass waste of 32mm (thirty two millimetre) dia size for sink or wash basin.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 600mm X 450 mm (six hundred millimetre into four hundred fifty millimetre) bevelled edge mirror of superior glass mounted on 6mm (six millimetre)thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing charomium plated brass soap dish of ISI marked Jal with C.P. brass brackets fixed to wooden cleats with C.P. brass screws as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing C.P. brass Zet ISI marked IS NO. 8934 of Ess Ess/Jaquar with necessary screws complete as per approved drawing, design & specification or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. brass pillar tap with capstan head of ISI marked Jal 15mm (fifteen millimetre) dia.as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing C.P. brass bib tap with capstan head of ISI marked Jal 15 mm (fifteen millimetre) dia with capaston head as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing C.P. brass angle valve 15mm (fifteen millimetre) dia.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 15 mm dia concealed CP brass stop cock ISI marked IS NO. 8934 of Ess Ess/Jaquar all necessary fitting complete as per approved drawing, design & specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing PVC connection with brass union 45cm. (forty five centimetre) Long and 15mm (fifteen millimetre) dia as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Tilak Raj

DHEERAJ PURI