Repairing AND Replacement of Shabby 33 KV, 11 KV, LT Lines AND its associated PCC, ST Poles in the area of sub divisions Ist (Town), Koyalbag, IInd (Grameen) AND Itauli under Jurisdiction of Electricity Distribution Division-II, Hardoi.

Amount

Safe carriage, loading-unloading with proper stacking of following material from store center to pit site/JE dump store.

PCC Pole of size 8.5 mtr long

ST pole 11 mtr. Long.

Stay Set Complete

33 KV Pin with Net

Disc insulator With fitting (B&S) 70KN

MS Earthing Rod (2540x20 mm) With Fitting

ACSR Weasel Conductor

GI Wire

Replacement of Broken PCC single Pole and Erection of PCC Pole 8.5 mtr long with Grouting & with all accessories

Replacement of Broken PCC double Pole and Erection of PCC Pole 8.5 mtr long with Grouting & with all accessories

Replacement of Broken ST single Pole and Erection of ST Pole 11 mtr long with Grouting & with all accessories

Replacement of Broken ST double Pole and Erection of ST Pole 11 mtr long with Grouting & with all accessories

Re-Stringing of three phase ACSR Weasel Conductor for 11 KV line.

Tilted of PCC/ ST Pole.

Rebinding of Stay Set.

Placement of 11/0.4 KV T/Fs with the help of crane sleepers and man power etc. from dump place to newly constructed T/Fs plinth & erection & commissioning of 250/400 KVA T/Fs of T/F Plinth and including jumpering with the system (All the required martial for above work shall be provided by contractor except T/Fs)

Fabrication erection and commissioning of 25/16/10 KVA T/F on double/single pole with all accessories. All material except 25/16/10 KVA T/F shall be supplied by the contractor.

Construction of retaining wall, fabrication & erection of Wire mesh fencing of size 3 + 3 & 2.0 M height around Transformer and Distribution Pillar Box with retaining wall & 1 no. gate with locking arrangement made of MS Angle iron of size 50x50x6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50x6 mm. Wire mesh of size 10 SWG rectangle type, as per norms of RESSPO. (All the material will be arranged by the contractor at his own cost).

Construction of T/F plinth of size 2x2x1.5 m on a padding 0.25M deep in ground 1:5:10 cement sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr height & 0.35 mtr wall will be constructed. Rest wall should be 0.23 mtr thick. Brick work in ratio 1:4 cement & cores Sand in the hollow portion the sand should be filled from the ground level up to 15 centimeter below from the top of wall, Cement, sand & brick Ballasts should be filled up to 15 centimeter. Two no. of channel 100x50 in length 1500mm will be grouded.0.35 CM.RCC will be done with cores sand, cement and stone ballast in the ratio of 1:2:4.The T/Fs plinth should be plastered on all sides 12mm thick in ratio 1:6 by cement and cores sand.(All the material to be arranged by the contractor .)

Erection of Stay Set Complete.

Fixing of Ordinary earthing by 11 KV MS earth Rod 2500 mm long as per RESPO schedule.

Stringing of three phase ACSR Weasel Conductor for 11 KV line

Guarding of 33 KV Line

Looping & chopping of tree branches for clearance of HT/LT line after clearance of line throughout pieces of tree branches of site (Approx. 3 Km).

M/S S.K. CONTRACTOR AND SUPPLIER

Neeraj Electricals