CONSTRUCTION SUB STORE FLOORING KOTA STONE AND SANITARY RELATED WORK

CONSTRUCTION SUB STORE FLOORING KOTA STONE AND SANITARY RELATED WORK

Demolishing cement concrete manually by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix.

Providing and laying in position cement concrete including curing, compaction etc, complete in specified grade excluding the cost of centering and shuttering All work up to plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size).

Providing and fixing Ist quality MAT finished ceramic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4).

Providing and fixing Ist quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS 13753 &IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size.

Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm

S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding.

P & F Indian type white glazed vitreous china Ist quality W.C orissa pan (IS 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 530x410mm.

P&F Ist quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (large) or half stall size 610x400x80mm.

P & F Kitchen & Lab Sink of approved make with C.I brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor: Fire clay glazed kitchen sink (IS 771-1985 Marked) size 600 x 450 x 250mm.

P&F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm. Brass (IS: 8931 marked)

P & F Bib Cock (IS: 8931 Mark). Superior quality of approved make: C.P. Brass bib cock. 15mm nominal bore.

P & F Bib Cock (IS: 8931 Mark). Superior quality of approved make: Synthetic Material (PTMT) bib cock of approved quality make, nominal bore. 15mm, 86 mm long

P&F rigid PVC Pipe (IS 4985 mark) class II/ (4 Kg. Cm2) approved quality make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778: 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/e fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc..)15 mm nominal size

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778: 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work), 25 mm nominal size

Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation. 20 mm thick inside plaster in CM 1:6. finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring. Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth up to 0.5 M

SPECIFIACATION AS PER TENDER DETAILS ( technical specation sheet page no 1 to 3)

SIDDHI BUILDCON & ENGINEERING (BID ID -3373489)

M/s Ramesh Chandra Solanki