SPECIAL REPAIR TO ROOF OF BLDG NO.T-76 OF DOMESTIC AREA AT AF STN GWALIOR

Amount

Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavated material n exc 2.5 KM distance and depositing where as directed, complete all as specified and directed.

Demolition of old cement concrete of any description and if any position not otherwise specifically provided for and removing the dismantled material to a distance upto 2.50 KM and depositing where directed.

M&L for cement concrete 1:2:4 type B-1 as in roof kerbs or mud stops, tounded or chamfered on edges all as required and directed by Engineer-in-Charge.

S&F in repair coloured powder coated Darpery Rod of aluminum 25mm inner dia with support of coloured powder coated aluminum decorative type desinge and pattern approved by GE including decorative brackets both ends complete all as specified.

M&L PCC 1:2:4 type B-I using 20 mm graded stone aggregates as in flooring finished even and fair completed all as specified and directed.

Taking down cement plaster on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc. complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in sub-base complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar complete all as sepecified and directed.

M&L for brick work with sub class 'B' bricks old size, straight or curved on plan exc 6M mean radius built in CM 1:6 complete all as specified and directed by the Engineer-in-Charge.

All as per ser item above but except bricks (by using old serviceable bricks).

M & L for rendering 15 mm thick on fair faces of brick wall finished fair & smooth in CM 1:6 complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick wall and finished fair & even in CM 1:4 complete all as specified and directed.

M & L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall care putty and primer , complete all as specified and directed.

M & L preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Dismantling old plain or corrugated Asbestos cement/ Steel sheeting in roof coverings etc and remove materials from site of work complete all as directed.

Dismantling of timber scantling (Unframed Work) 40 sqcm and over in section, in any position as in framed work complete all as specified and as directed.

Dismantling of framed truses n.exc 10 Mtr Span complete all as specified and directed.

S&F rolled section for structural steel work as in main and cross beams, hip and jack rafters, purlin where connected to common rafters and running rails and guides for sliding crane, fixed with angle cleats or other connecting plates/ bolts, conforming to Fe-290(Gde-E-165) complete all as specified and as directed. Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete.

M&L for Pre-painted galvalume alu. Zinc coating GI based corrugated steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in roof covering fixed using hot dip galvanized self drilling and self tapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces) all as required and directed by Engineer-in-Charge.

M&L for Pre-painted galvalume alu. Zinc coating GI based Plai steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in ridges of roof covering fixed using hot dip galvanized self drilling and self tapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces) all as required and directed by Engineer-in-Charge.

Supply and fixing of rubber beading 40mm strip in bottom of door complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frames) exc 1.5 Sqm bt n exc 4 Sqm each complete all as specified and directed.

S&F 2nd class hard wood as plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints of llnd class hard wood all as required and directed by Engineer-in-Charge.

S&F factory made plain framed paneled shutter 35 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style kiln seasoned and chemically pressure treated as spd and directed.

S & F factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter , divided into squares with plain chamfered rounded, mitered and rebated sash bars all as required and directed by Engineer-in-Charge.

S&F 100mm stainless steel, but hinges medium weight complete all as specified and directed.

S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long all as required and directed by Engineer-in-Charge.

S&F aluminum handles cast type anodized 150 mm size all as required and directed by Engineer-in-Charge.

S & F 140mm door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed complete all as specified and directed.

Supply and fixing of steel door spring of size 200mm to wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified and directed.

S&F Aluminium anodised , sliding door bolt with hasp , staples (bolt type) and fixing clipsof sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed...

Supply and fix galvanized mild steel wire cloth 0.56 mm nominal dia of wire and avg width of a-pertare 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed...

M & L for providing cement concrete type C1 1:3:6 (20mm graded stone aggregate as in filling in hole fast blocks and like complete all as specified and direcetd.

S&F mild steel work as in small ariticles as band, strap, hold fast and smiliar articles all as required and directed by Engineer-in-Charge.

M&L for two coat of synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not other wise described over 10 cm width or girth all as required and directed by Engineer-in-Charge.

M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth complete all as specified and directed...

Dismantling wall and ceiling boards (fibre ,pulp ,insulation etc ) or insulation boards /slabs/ blankets ,any thickness , including cover fillets or aluminium grid frame work complete all as directed

M&L 4 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws fixed in ceiling flat or sloping complete all as specified and directed.Make : Armstrong/Everest

M&L GI frame work (size of grid 605x605 mm) for ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sourrounding wall using nylon sleaves and screws at 450 mm centre to centre/intermidate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm c/c with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flanges of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips accross the intermediate channel at 457 centre to centre including hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long complete all as specified.

S & F colour powder coated aluminium frame and shutters for door windows ventilators with one or more rebates or aluminium section of two or more traccks incase sliding windows including jointing cleat for fixing (minimum thickness of powder coating shall be 50 micron) complete all as specified and directed.

S&F aluminium grills of size exc 5mm x 7.5mm and aperture n exc 80mm incl fixing with aluminium channel 1mm thick with steel screw and tint match with existing complete all as specifed and as directed.

M&L for complete removal of existing treatment from old surfaces of walls including cornices and applying 1mm thick wall care putty including one coat of primer to obtain the desired/ true surface of wall complete all as specified and directed by Engineer- in-charge.

M&L for two coats oil emulsion distemper on putty prepared surfaces / old decorated surfaces as specified and directed.

M&L, for two coat of exterior emulsion wall paint , (Ace paint from Asian paint or wall mast from Berger paint) or equivalent on bands/ facia on putty prepared surfaces/ old decorated surfaces of walls Complete all as specified and as directed. Note : Colour will be decided by E- in Charge.

S&F, 4.8 mm thick sheet class ordinary quality and glazing in aluminium frame work including necessary acessories all as required and directed by Engineer-in-Charge.

Demolition of Stone slabs of any description or thickness in floors / kitchen platforms etc., complete all as specified and as directed.

M&L for granite 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite stone including cutting and polishing and chamfering or rounding of exposed edges as in cooking plate form/window cill or other similar situations complete all as specified and directed.

M&L for Machine cut kota stone slab 20-25mm thick as in flooring laid over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified and directed

M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes etc complete all as specified.

Dismantling of old aluminium partition and refixing the same in the same location including necessary minor repairs/replacement of damaged parts of the partition all as specified and directed.

Granding existing kota stone flooring/skirting with stones and washing down with water and finaly polishing to the entire satisfaction of GE.

Taking down carefully existing unserviceable copper/ aluminium point wiring of any description & in any position with and including pvc/steel conduit all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings call bell, lamp holders etc and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed. NOTE: Old fittings/fixtures/accessories like switch, sockets, lamp holders, regulators light fittings etc found in serviceable condition shall be removed carefully for reuse in the work and shall be paid for separately under appropriate item of Schedule `A’.

Material and labour for point wiring for one light /fan/Exhaust fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduits (Medium grade) of size not less than 20 mm dia all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with laminated top sheet of 3 mm thick for housing of switchws, sockets, regulators etc including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. NOTE :-(I) The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers

Description same as per Srl item No 2 above but, point wiring for 5 pin switch socket outlet combination, 5/6 Amps on independent board.complete all as specified and directed..

M & L for switch flush type single pole one way 5 Amps, 240 volts, white ivory finish complete all as approved

S&F switch socket combination multi purpose, 5 Pin 6 amps, flush typeWith Indicator complete all as specified and as approved

M&L for ceiling rose surface Bakelite two to three terminal, 18 x 50 mm complete all as specified.

Supply and Fixing step type electronic fan regulator single phase ,230 volt, 100/120 watt complete all as specified and as approved

Supply & Fix for decorative slim linear LED tube light fitting 01x20 watt light with co extruded polycarbonate body, environmental frendly, energy efficient ready to use pack with all accessories including 01 No 20 watt tube rod and connecting the same to ceiling rose with using copper conductor 24/0.20 flexible PVC sheathsd and fixing arrangement for fixing the light fitting to wall/ roof surface complete all as specified & directed by Engineer in-charge Make:- Havells Cat Part No. LUMILINEBS20WLED865SPCWH/ Surya Cat Part No. SLEBT-20/ CG Cat Part No. LCTL 18 CDL

S&F LED bulk head fitting 10 watt energy saving new generation IP 65 luminatre with opel diffuser complete with lamp all as specified and directed by Engr - in Charge. Make : - Havells Cat part No HEXAFT10WLED857SSYMBOPC/ Surya Cat Part No. SLE BH-10W Plus/ CG Cat Part No. LBPH-10CDL

Dismaintling & Taking out MCB DBs VTPN with all MCB's/Isolator & metal clade box any size , any type and capacity all as required and directed by Engineer-in-Charge.

Supply and fixing of sheet metal enclosure Double door for DB’s 8 way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires all as directed.

Supply and Fixing for sheet metal enclosure for DB’s 4 way 240 volts double door with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires all as directed.Make: L & T/Legrand/Havell's

S&F MCB single pole 6 to 32 Amps, 10 KA ,240 Volts complete all as specified.

S&F MCB Single pole and neutral 40 to 63 Amps, 240 Volts complete all as specified.

Disconnecting & taking up or down unserviceable sub main wiring of aluminium/Copper conductor with two run of single core cable and one run of single core earth cable of any description, any size & in any position including taking out existing conduits of any description and making good the disturbed surfaces to the existing surfaces all as specified and directed.(NOTE: Two run of single core PVC cable with one run of earth conductor shall be measured as one unit.)

M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4.0 Sqmm of voltage rating upto and including 1100 Volts grade in and including conceled PVC conduit, med grade of size not less then 20 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 4.00 Sqmm as earth continuity conductor all as specified and directed.(NOTE : (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.) (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface all as required and directed by Engineer-in-Charge.

All as per item above but 6 Sqmm and 6 Sqmm earth wire with PVC conduit 25 mm dia med grade

M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB of capacity 20 Amps, 240 Volts complete fixed on wall by provisioning of suitable sizes of MS strips, nuts, bolts and washers taking down of AC box all as required and directed by Engineer-in-Charge.

Taking down carefully from existing place for ceiling fan/ Exhaust fan and removing to MES store yard Scraping,cleaning & painting with two coats of super enamelled paints (as approved by GE) greasing/oiling including down rod as per site requirment and refixing at site complete incl electric connection with three core flxible wire 1.5 sqmm all as specified and directed by Engineer-in-Charge.

Taking down carefully from existing place for re use geyser by disconnecting elect /water supplyconnection and refixing the same after civil work incl all elect /water supply connection connecting with suitable wire all as specified and directed by Engineer-in-Charge.

M&L for earthing complete with MS Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level including necessary excavation, earth work ,charcoal, salt etc and connected to GI earthing lead wire 4 mm dia by means of GI bolt nuts check nuts washers etc and 20 mm dia GI light grade watering pipe with funnel, wire mesh etc including PCC (1:3:6) type C-1 using 20 mm graded stone aggregate earth pit with 40x40x6 mm mild steel angle iron frame, RCC cover (1:2:4) type B-0, 50 mm thick reinforced with 8 mm dia round bar @100 mm centre to centre both ways with mild steel handle 12 mm dia, plastering 12 mm thick in cement mortar (1:6) internally and upto 150 mm below ground level externally, and GI earth lead wire 4 mm dia and 15 mm dia GI protection pipe medium grade from earth plate to test point upto 7.5m length all as shown in electrical plate No 3 of SSR Part -I 2009 and connected to earth test point including testing complete all as specified & directed.

Supply and fixing Street/Security light fittings 1X35W new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover suitable for pole dia O 40mm(Max) with complete (40 mm GI pipe light grade ),clamp,nut-bolt and washers all directed by Engineer-in-Charge.Make;Havells /CG/Bajaj

S&F in replacement 35/36 watt LED recess softline luminaire suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extruded diffuser giving glare free light and good aesthetic appeal. Fixture size 595x595x70mm complete with LED tube with driver and all accessories specified and directed by Engr -in- Charge. Make : Havells cat part No PLUTONEO2X2PLR34WLED840S/Surya Cat No- SLEFP36R 22/ CG Cat Part No -LCTLSN36- CDL.

m/s vikash Engineers

Sunil Traders

Babatia super works

M/s Shubham Construction Co.