Samudayik Bhavan Nirman Karya Gram Mothuka

uhao]ukyk] [kkbZ] vkfn ds fy, 1-5 eh- xgjkbZ rd feVVh [kqnkbZ djuk] ry dks dqVuk] ikuh Mkyuk cxy dks nckuk] [kqnh feVVh dks ckgj fudkyuk] uhao Hkjus ds ckn [kkyh LFkkuksa dksa iqu% feVVh ls Hkjuk rFkk cph feVVh dks 50 eh- dh nqjh rd fuLrkj.k djuk lk/kkj.k@l[r feVVh esa

lhesUV dkaØhV uhao ;k QeZ esa 40 fe- eh- ukeh; eki dh iRFkj fxÍh @ dh fxÍh lhesUV&jsr elkyk] 1 lhesUV % 4 jsr % 8 fxÍh vuqikr esa feykdj Mkyuk rFkk dqVkbZ djuk] rjkbZ lesrA

नींव तथा कुर्सी में पत्‍थर की वे रद्धा-ढोका सीमेंट-बजरी मसाले में, मय बगल की झिरी बन्‍द करना तथा तराई आदि सहित। सीमेंट मसाला 1:6 में

नींव तथा कुर्सी प्रथम श्रेणी ईंट की चिनाई सीमेन्‍ट -बजरी 1:6 मसाले में, मय बगल की झिरी बन्‍द करने तथा तराई सहित।

अतिरिक्‍त राशि अधिरचना में चिनाई कार्य में 4.5 मीटर ऊंचाई तक कुर्सी स्‍तर से।

सेन्‍टरिंग'शटरिंग (तख्ता एवम ढुलाबंदी) का आर.सी.सी. छत, स्‍लेब, छज्‍जे, लिन्‍टल आदि डालने के लिए लगाना 4.5 मीटर ऊचाई तक के लिए तथा हटाना आदि विशेष विवरण के अनुसार।

RCC कार्य के लिए लोहे को काटना मोड़ना तथा स्थान पर लगाना तथा बांधने का कार्य मय आपूर्ति के

सीमेंट कंक्रीट 1:2:4/1:1.5:3 मिश्रण की प्रवलित सीमेंट कंक्रीट में डालना तथा आपूर्ति करना, छत की स्‍लैब, छज्‍जे, बीम, लिंटल आदि में दबाना, तराई करना तथा सतह को 1:3 सीमेंट मसाले से समतल करना आदि समेत पाडबन्दी सहित परन्‍तु स्‍टील तथा शटरिंग की कीमत अलग से।

सीमेंट प्‍लास्‍टर दीवार पर 1:6 अनुपात में सीमेंट-बजरी मिलाकर जोड़ों को कुरेदने तथा 14 दिन तक नियमित तराई समेत।

कोनिया लोहा (एंगल आईरन) के 40X40X3 मिमी की बाहरी चोखट में 22 गेज की सादा जी.आई. चद्दर के 2 पल्‍ले वाले दरवाजे 25X25X3 मिमी के कोनिया लोहे के चौखट (फ्रेम) में आपूर्ति करना तथा लगाना मय अर्गल स्‍लाईडिंग वोल्‍ट, चिटकनी तथा पकड़ पट्टियां आदि फिटिंग सहित जी.आई.सादा चद्दर विश्‍लेषण 1X2 वर्गमीटर दरवाजे के लिए ।

ग्रिल/गेट आदि में लौहे का कार्य जिसमें सपाट कोनिया, टी तथा नाळीदार (चेनल), को काटना, चढ़ाना तथा लगाना आदि।

लौहे की खिड़की में लौहे की जाली 14 मेश,24 गेज की लगाना तथा आपूर्ति करना तथा 20 X 3 मिमी बीडिंग (beading) के साथ लगाकर स्‍क्रू से कसना। एनेलिसिस 1.2 X 0.60 मीटर साईज की खिड़की के लिए 0.72 वर्ग मीटर के लिये

फर्श के नीचे सूखा खरंजा हेतु 15 सेमी उंचे पत्‍थरों की आपूर्ति एवं खरंजा लगाने का पूर्ण कार्य।

सीमेन्‍ट कांक्रीट नींव या फर्श में 40 मि.मी. नामीय माप की पत्‍थर गिट्टी(crusher broken) / ईट की गिट्टी सीमेन्‍ट-रेत मसाला , 1 सीमेन्‍ट: 5 रेत: 10 मिटटी अनुपात में मिलाकर डालना तथा कूटाई करना, तराई समेत ।

सीमेंट प्‍लास्‍टर दीवार पर 1:6 अनुपात में सीमेंट-बजरी मिलाकर जोड़ों को कुरेदने तथा 14 दिन तक नियमित तराई समेत।

प्‍लास्‍टर छत पर करने का अतिरिक्‍त खर्चा।

50 मिमी मोटाई में सीमेंट कंक्रीट 1:2:4 मिश्रण जिसमें 1 सीमेंट 2 बजरी 4 पत्‍थर की या ईंट की 12 मी. नामीय गिट्टी के साथ मिलाकर डालना, कूटना, दबाना तथा तराई आदि सहित।

Distempering with oil bound washable distemper PWD Item No12.37.1 page B-72 Quantity as per plaster

इनामिल पेन्‍ट का लेप करना 3 तह में ताकि इकसार आभा हो जाये (To give even shade) नये कार्य/पुराने कार्य पर सम सरफेस बनाना।

लाईट पॉइन्‍ट/फेन पॉईन्‍ट/ एक्‍जास्‍ट फेन पॉइन्‍ट/ काल बेल पॉईन्‍ट के लिए 1.5 वर्ग मि.मी. एफआर पीवीसी इन्‍सुलेटेड कॉपर कन्‍डक्‍टर सिंगल कोर केबिल से, मॉडयूलर स्विच, मॉडयूलर प्‍लेट, उपयुक्‍त जीआई बॉक्‍स एवं 1.5 वर्ग मि.मी. एफआर पीवीसी इन्‍सुलेटेड कॉपर कन्‍डक्‍टर सिंगल कोर केबिल से अर्थिग सहित आवश्‍यकतानुसार सतह/खाली स्‍थान में मध्‍यम दर्जे की पीवीसी कन्‍डूट वाईरिंग करना

4 S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947- 2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of produc

Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver , System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Providing & Fixing of energy efficient /energy saving IP 20 LED direct retrofit Bulb in existing holder or fixture as required with system lumen efficacy ≥100 lm/Watt output ,pf 0.95 , CRI >70, minimum life time of minimum 25000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer Annexure "A" attacheded with this BSR.

Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ wor 1200 mm Sweep BEE 2 Star rated (service value >=4.5 to < 5 )

Providing & Fixing of ISI marked (IS:1258) batten/angle lamp holder with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screwsincluding making connection testing etc. as required.

P & F 1.2mm thick M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . All as per pre approved by Engineer in charge. For additional technic

ADDFOR COTINGENCY ON LABOUR & MATERIAL @ 2%