RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled Yes Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Digital Transceiver-MOBILE RADIO ( 482 pieces ) Technical Specifications 1/7 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) PERFORMANCE FEATURES Frequency Range (MHz) 136-174 136-174 Types of Bandwidth VHF Full Band VHF Full Band Channel Capacity (set with display) 1000 1000
Required1024
Required255
Required256
Required260
Required512 Channel Spacing (KHz) 12.5 * Frequency Stability(± ) (PPM) - * Technology Digital TDMA (2-slot) * Air Interface Standard Open Standard DMR Tier-II * Antenna Impedance 50 * TRANSMITTER RF Power output programmable * RF Power output range 5 to 25 watts 5 to 25 watts FM Emission 11K0F3E
Required7K60FXE
Required7K6 0FXD
Required7K60FXW * Digital Modulation 4FSK * Transmitter FM Hum/Noise (dB) -40 * Transmitter Modulation Limiting +/- 2.5 KHz @12.5KHz * Transmitter Adjacent Channel Power (dBc) -60 * Audio Response +1
Required-3 dB * Audio Distortion 3 * Digital Vocoder AMBE+2 * RECEIVERS Analog Receivers Sensitivity for 12dB SINAD 0.22 * Digital Receiver Sensitivity at 5% BER 0.19 * Receiver Adjacent Channel Selectivity (dB) 65 * Inter Modulation (dB) 78 * Receiver Audio Output 3 * Receiver Rated Audio Distortion 3 * ACCESSORIES Programming kit yes * 2/7 User Manual with each radio sets provided free of cost in soft as well as hard copy yes * Technical repairing & maintenance manual with complete block diagram
Requiredcircuit layout etc in soft as well as hard copy yes * VARIOUS FEATURES Simple Press to talk yes * Low Battery Alert yes * CTCSS or DCS yes * Mixed Mode Operation (analog & digital) yes * Signaling 2Tone
RequiredDTMF
RequiredDigital * Busy Channel Lockout Yes * Selective Call Decode Yes * PTT ID Encode Yes * Channel Scanning with call quieting facility Yes * Emergency SOS/SIREN Yes * Talk-around Yes * Automatic Number Identification (ANI) Yes * Text message and predefined message Yes * Keypad Yes * Availablity of Inbuilt GPS system Yes * If yes
RequiredHorizontal accuracy 5 * Time to first fix(TTFF) cold start 1 * Time to First Fix(TTFF) Hot start 10 * Capable of being Killed Unkilled Yes * Protocols supported in case of third party encryption - * GENERIC Weight of Mobile Transceivers 1800 * Other features - * 3/7 POWER REQUIREMENTS Power Source 10.8V to 15.6 V DC * SERVICE Warranty 2 2.0 INTEROPERABILITY Interoperable yes * model of compatible transceiver - * Availability of Interoperability(IOP) Certificates Yes * If yes
Requiredthen certifying agency TWG * Certification number - * CERTIFICATION EMI/EMC ETSI EN301 489-1 & ETSI EN301 489-5 * Tested by DCPW No * SAFETY Protections Reverse polarity protection and protection against high VSWR * OPERATING CONDITION Minimum Operating temperature -30 * Maximum Operating temperature 55 * Minimum Storage temperature -40 * Maximum Storage temperature 70 * Non Condensing Humidity @40 degree C 95 * TEST REPORT DETAILS Dust test as per MIL-STD-810 G * Vibration test as per MIL-STD-810 G * Shock test as per MIL-STD-810 G * Water Intrusion test as per IP-54 * Salt test as per MIL-STD-810 G * Rain test as per MIL-STD-810 G * Altitude test as per MIL-STD-810 G * Availability of Test Reports from Central Govt/NABL/ILAC acredited lab to prove confirmity to the Specifications Yes * Test Report Number and Date - * 4/7 Name and Address of the Lab - * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents