GE/H-21/2020-21

Amount

Dismantling of wall and ceiling boards of any description, any thicknes including cover fillets and frame work complete all as specified.

Dismantling of boarding any description, fixed in any position with nails complete all as specified.

M&L for exposed GI frame/grid system duly powder coated for module size of 600 x 600 mm suitable for lay-in aluminium/mineral fibre ceiling tiles, having main T runner of 24 mm size, suspended at 1200mm C/C and cross T runner of 24 mm size, suspended at 600mm C/C with interlocking arrangements to form grid of 600 x 600mm, perimeter runner/channel of 15 mm size, main and cross T runner supported by 4mm dia GI rod from slab / Roof, wall angle etc with and including all fixing accessories and making good of distrubed wall surfaces with POP and one coat of oil emulsion distemper, as required to match the existing surfaces, complete all as directed. (Note: Tile shall be measured and paid seperately under respective item of schedule)

M&L for aluminium powder coated false ceiling, lay-in type, 0.7 mm thick, having tegular edge profile, duly powder coated, perforated type with glass fibre acoustic fleece, suitable for false ceiling grid/frame module of 600 x 600mm size, complete all as directed. Make : Armstrong / Gypboard / Anchorlam anchor(Note : The grid /frame shall be measured and paid seperately under respective item of schedule.)

S& F for solid PVC wall lining consisting of 5mm thick wood grain finish PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified.

M& L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

M & L in repair 18 mm thick Medium density fibre board, exterior grade, fixed to timber framework as in cupboard and cupboard shutters including leeping/beading fancy type with screws complete all as specified.

S&F soft closing clip on hinge, full / half overlay type, of stainless steel, all as specified.

S&F in repairs 100 mm size stainless steel handles, matt finish, complete all as directed. (Make : Hettich/Ozone/Safex/Kich/Dorma/Hardwyn).

S&F brass two levers keys,Locks, cupboard,grade I, size 50 mm suitable for cup board door/drawer , complete all as specified.

Taking down of shutter of any description exc 1.0 sqm but n exc 2.00 Sqm each.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area n exc 1.50 Sqm.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area exc 1.50 Sqm but n .exc 4.00 sqm each

S & F factory made solid PVC moulded door shutter, 28 to 30 mm thick (Stiles), with 2,4 or 6 raised panel design with but 2mm thick 3D wood grain moulded PVC Sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face complete all as specified.

S&F solid PVC door frame of size 50x47mm made out of 5mm but wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified

S & F stainless steel butt hinges medium weight 100mm size complete all as specified.(Make : Hettich/Ozone/Safex/Kich/Dorma/Hardwyn).

S&F aluminium anodised barrel tower bolt 200mm long extruded section all as specified.

S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified.

S&F aluminium powder coated glazed three track sliding window of frame 100 x 44 x 1.5mm and sliding shutter of section 40mm x 19mm including 3mm thick sheet glass, ordinary quality exceeding 0.5 Sqm in each pane, in two track shutter and in one track stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all fittings such as aluminium handle of size 100mm and locking arrangements with each moving leaf all as specified. ( Note; 1.The rate quoted by the tendere are deemed to be included provision of sliding chawkhat,shtter frames,sheet glass, wire cloth and fittings such as handle, locking arrangement etc complete and nothing extra shall be paid on this account. 2. The measurement shall be in sqm computing from outer dimension of the track which shall be included two half wide shutter of sheet glass overlapping each other equal to width of shutter section, and one half wiide shutter of wire gauge)

S&F 100x44x1.5mm aluminium powder coated section as in chowkhats or frame with rebate complete all as directed.

Supply, fabricating and fixing of aluminium door shutter powder coated of extrusion aluminium section, Vertical style of door shutter of size 85mmx44.45mmx1.5mm thick. Top, middle and bottom rail of size 85mmx44.45x1.5mm thick and fixing plain/tinted sheet glass or ACP sheet with aluminium beading and rubber gasket/beading as directed One mortice lock for aluminium door (each), and three nos aluminium hinges of size 100mm of and two aluminium tower bolts of 250mm size and fixed with rawl plug including rectification of floor/wall to match the existing surfaces all as specified and as directed by Engineer-in-Charge at site. (Note: The sheet glass Plain/frosted/ACP Sheet shall be measured and paid seprately under respective item of schedule )

M&L for 5.5 mm thick plain / frosted glass fixed with beading in aluminium frame all as specified.

S&F 5mm thick aluminium composite panel (ACP Sheet) including necessary clips, rubber packing & aluminium beading (aluminium frame ) all as specified.

S&F in replacement toughened glass( plain/frosted) frameless door with fixed portion, of 12 mm thickness, including cutting holes, edges rounded and etching works etc and all kind of SS patch fitting & fixture, spider patch etc, (excluding handle, lock and floor spring) complete all as directed.

S&F of stainless steel handle 450 mm long fixed to 12 mm thick toughned glass door with and including all fixing accessories i. e. bolt washer, adhesive etc, complete all as directed. (Make : Hettich/Ozone/Safex/Kich/Dorma/Hardwyn)

S&F of SS door lock, glass to glass type, suitable for 12 mm thick frameless toughned glass door with and incl all fixing accessories i. e. bolt, washer, screw, adhesive etc of suitable size, complete all as directed. (Make : Hettich/Ozone/Safex/Kich/Dorma/Hardwyn)

S&F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as directed.

S & F in repairs door closer, Aluminium (die cast) body,hydraulically regulated, designation No. 3, unversal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg

S&F aluminium partition wall of aluminium section 100mm x 44mm x 1.5mm thick frame rectangular section and panel of ACP sheet or prelaminated board in bottom panel and 5.5mm thick sheet glass in top panel with rubber lining and aluminium beading around length including necessary fixing arrangement for bottom and top member of aluminium frame in floor/PCC/Brick work as per site requirement with rawl plug etc, including chromium plated steel screws 60cm centre to centre all as specified and directed by Engineer-in-Charge (Note : THe rate quoted by the tenderer are deemed to be included provision of ACP sheet/ prelaminated board and sheet glass . Nothing extra shall be paid on this account.)

S&F of venatian blinds vertical type 100mm wide slats made out of fabric cloth of approved shade fixed as per the instructions of manufacturers, complete all as specified .

S & F of SS (Gd-304) framed work of angles, hollow tubes (squre/rectangular), flats etc of any shape and size and all kind of machine works i.e. cutting, welding, bending, moulding, grinding, polishing, buffing etc to get the required shape and size, fixed to any position and at any surface with fastners/screw etc, complete incl taking down all as directed. Note: The weight of different section where not available shall be calculated by applying weight conversion @ 7980 Kg/Cum of the section.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified.

S & F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified.

Taking down cement plaster on brick or concrete surface including racking out joints, hacking for key scrubbing down with water etc complete all as specified.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for prepation of new plastered surface of wall and applying two coat of cement base paint complete all as specified and directed.

S & F 10mm multiwall polycarbonate sheet clear or any colour, fixed to iron members as purlin, rafter with fastners/screw, washers and sealed with silicon in roof complete, including taking down existing old sheets all as specified and directed.( Note : The work is to be carried out at roof level which is G+3 storey. The rate quoted by the tenderer are deemed to be included the necessary scaffolding and safety precausions for the workmen and nothing extra shall be claimed on this account) . (Make: RainbowGroup/Fibre Glass Creations/Gallina Polycarbonate Sheets)

Demolition of cement concrete in ground floor (unreinforced) and pavings n exc 15cm thickness (below or above ground level) complete all as specified.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in sub base cemplete all as directed and specified

M & L for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:6 complete all as specified.

S & F Solar control film 25micron reflective type sticked to glass panes as per instruction of manufacturers complete all as specified.

Dismentling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M & L for light or dark shade, double charge/ultra charge virified tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and ncluding 15mm thick cement screed bed in CM 1:6, set and jointed complete all as directed.

All as item No above but in dado/skirting over 10mm thick rendering in CM 1:4, complete all as specified.

M & L for glazed ceramic digital coloured tiles 300x450x7 to 8 mm thick in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified.

M & L Non skid coloured ceramic tiles 7-8 mm thick (square or rectangular) area of each tiles exc 0.06 sqm but n exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match in 15 mm thick screed bed in CM 1:6 complete as specified

M & L for 18 to 20mm thick granite of any type (table rubbed & polished) in jambs, pillars, window cills, plate forms in CM (1:4) including pointing in white cement (1:2) ,using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bad or backing layer in CM 1:4 complete all as directed.

S & F for 16-18mm thick Dholpur stone cladding gangsaw cut with machine cut edge, uniform colour of each stone size not exceeding 0.25 sqm area fixed with & including one number SS clamp (grade -202) of flat- 30 mm x 2 mm, 150 mm long made to shape in each slab, making V groove at top & bottom of stone & drilling hole for hold fastner, polishing, runbbing & including silicon treatment complete all as specified (Note : Dholpar stone shell be fixed to any shape and size and fixed in patches, single piece or uniform area as required at site with iron scafolding arregements up to G+3 height).

M&L for preparation of old painted concrete surface of any description and applying two coats of synthetic enamel paint of any colour as required at site complete all as specified and directed.

S & F in repair stainless steel curtain rod 25mm dia of make VISTA or eqv. including brackets, a pair of side knobs in every 1.0 to 1.5m span, fixed to wall complete all as specified and directed.

sony engineering works

Shivam Firetech Engineers

amtoindia

ASHISH GARG AND COMPANY

R S CONSTRUCTION CO.

MRITUNJYA ASSOCIATES

ACR ENTERPRISES

GLIBS CONSTRUCTION