COMPREHENSIVE REPAIR AND MAINT OF ALL TYPES OF WOODEN FURNITURE UNDER BSO OF GE (EAST) JABALPUR

Amount

Bed Plywood Top (Drawing No FD-247) : Removing old damaged/unserviceable plywood of head rest of bed plywood top and supply & fixing new head rest (of suitable size), 4.0 mm thick one side teak faced and other side commercial plywood including prepration of surface & applying high gloss french polish on newly fixed head rest to match the colour with existing surface complete all as specified and directed by Engr-in-Charge.

All as per ser item No 1 above but unserviceable foot rest complete all as specified and directed by Engr-in-Charge.

All as per ser item No 1 above but removing old damaged/unserviceable long rails of bed plywood top. Supply and fixing new long rails made of 1st class Hard Wood (MP teak) minimum size 1920 x 100 x 35 mm and applying high gloss French polish on newly fixed long rails to match the colour with existing surface complete all as specified and directed by /Engr-in-Charge.

All as per ser item No 1 above but removing old damaged plywood top and supply and fixing new ply wood of suitable size, 12 mm thick BWR type, ISI mark (minimum size 6’ x 3’) as per drawing complete all as specified and directed by Engr-in-Charge.

All as per ser item No 1 above but removing old damaged stiffner 40mm x 60mm and supply and fixing new stiffner of teak wood 1st class suitable size as per drawing complete all as specified and directed by Engr-in-Charge.

All as per ser item No 1 above but removing old damaged Leg and supply and fixing of new leg of length 660 mm of section 60 mm x 30 mm from 400 mm to 660 mm and section 60 x 60 at 400 mm and 30 x 30 at bottom of the leg of teak wood Ist class suitable size duly fixed and fixing of one side teak face ply wood 4 mm on B/S after reparing complete all as specified and directed by Engr-in-Charge.

All as per ser item No 1 above but removing old damaged leg at the foot and supply and fixing new leg of length 500 mm of section 60 mm x 30mm from 500 mm to 400 mm and section 60 x 60 at 400 mm and 30 x 30 at bottom of the leg of teak wood Ist class suitable size as per drawing complete all as specified and directed by Engr-in-Charge.

M&L for painting of the MNF set with two coats of synthetic enamel paint of superior quality of black colour after preparation of the surface of MNF set complete all as specified and diected by Engr-in-Charge.

All as per ser item No 1 above but supply and fixing new corners of suitable size at the point of joining rail with legs duly polished of teak wood 1st class so that all joints be stiff/tighten and play be stopped complete all as specified and directed by Engr-in-Charge.

Chair Dining (Drawing Nos FD-16, 279, 228, 203 & Fd/Map-II/05) : Taking out old broken unserviceable front leg of chair dining and supply & fixing new front leg of suitable size, made of 1st class Hard Wood (MP teak) including preparation of surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing chair complete all as specified and directed by Engr-in-Charge.

All as per ser item No 10 above but rear legs complete all as specified and directed.

All as per ser item No 10 above but side rails complete all as specified and directed.

All as per ser item No 10 above but rear rails complete all as specified and directed.

All as per ser item No 10 above but front rails complete all as specified and directed.

All as per ser item No 10 above but side stiffeners complete all as spefified and directed.

All as per ser item No 10 above but center stiffeners complete all as specified and directed.

All as per ser item No 10 above but Back Rest stiffeners complete all as specified and directed.

All as per ser item No 10 above but removing old damaged PVC seat and supply and fixing of new PVC Seat complete all as specified and directed.

Replacement of old unserviceable PVC buffers of ser item No 10 and supply and fixing PVC buffers/rings as per existing size of suitable for chair dinning size complete all as specified and directed by Engr-in-Charge.

Chair writing (Drawing No FD-250, 280) :- Taking out old broken unserviceable front leg of chair writing and supply and fixing new front leg of suitable size, made of 1st class hard wood (MP teak) including prepration of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing chair complete all as specified and directed.

All as per ser item No 20 above but rear legs complete all as specified and directed.

All as per ser item No 20 above but side rails complete all as specified and directed.

All as per ser item No 20 above but rear rails complete all as specified and directed.

All as per ser item No 20 above but front rails complete all as specified and directed.

All as per ser item No 20 above but side or center stiffeners complete all as specified and directed.

All as per ser item No 20 above but adjustment and tightening of chair to make all joints stiff complete all as specified and directed by Engr-in-Charge.

All as per ser item No 20 above but Back Rest complete all as specified and directed.

All as per ser item No 20 above but arm rest complete all as specified and directed.

Replacement of old unserviceable PVC buffers of ser item No 20 and supply and fixing PVC buffers/rings as per existing size to chair writing complete all as specified and directed by Engr-in-Charge.

Chair Wooden Bottom (Drawing No FD- 56, 225, 285): Taking out old broken u/s front leg of chair, supply & fixing new front leg of suitable size, made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing chair complete all as specified and directed by Engr-in-Charge.

All as per ser item No 30 above but rear leg complete all as specified and directed.

All as per ser item No 30 above but side rails complete all as specified and directed.

All as per ser item No 30 above but rear rail complete all as specified and directed.

All as per ser item No 30 above but front rail complete all as specified and directed.

All as per ser item No 30 above but side stiffeners complete all as specified and directed.

All as per ser item No 30 above but centre stiffeners complete all as specified and directed.

All as per ser item No 30 above but supply & fixing with suitable wood screws new seat of 6 mm thick BWR grade plywood complete in replacement of old broken as specified and directed by Engr-in-Charge.

All as per ser item No 30 above but back rest complete all as specified and directed.

Replacement of old unserviceable PVC buffers of ser item No 30 and supply and fixing PVC buffers/rings as per existing size to chair wooden bottom complete all as directed by Engr-in-Charge.

All as per ser item No 30 above but adjustment and tightening all joints complete all as specified and directed by Engr-in-Charge.

Chair Easy (Drawing No FD-229):- Taking out old broken unserviceable front leg of chair easy and supply & fixing new front leg of suitable size made of 1st class hard wood (MP Teak) including preparation of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing chair complete all as specified and directed by Engr-in-Charge.

All as per ser item No 41 above but rear leg complete all as specified and dircted.

All as per ser item No 41 above but front or rear rail of seat complete all as specified and directed.

All as per ser item No 41 above but adjustment and refixing so as to make stiff all joints complete all as specified and directed by Engr-in-Charge.

All as per ser item No 41 above but top rail of back complete all as specified and directed.

All as per ser item No 41 above but bottom rail of back complete all as specified and directed.

All as per ser item No 41 above but arm complete all as specified and directed.

All as per ser item No 41 above but side rail of seat complete all as specified and directed.

Replacement of old unserviceable PVC buffers of ser item No 41 and supply and fixing PVC buffers/rings as per existing size to chiar easy complete all as directed by Engr-in-Charge.

Table Peg (Drawing No FD- 25, 236, 277) :- Taking out old broken unserviceable leg of table peg and supply & fixing new suitable leg made of 1st class hard wood (MP Teak) including preparation of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by Engr-in-Charge.

All as per ser item No 50 above but taking out broken/unserviceable table top of table peg and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated MDF board, exterior grade of suitable size, one side with teak shade and balancing white lamination on other side with and including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and headless pins duly given a coat of high gloss French polish complete all as specified and directed.

All as per ser item No 41 above but top side rail complete all as specified and directed.

All as per ser item No 41 above but bottom rail complete all as specified and directed.

Replacement of old unserviceable PVC Buffers/Rings item no 50 and supply and fixing PVC buffers/rings as per existing size to table peg as directed by Engr-in-Charge .

Table Centre (Drawing No FD-29, 274, 235) :- Taking out old broken unserviceable leg of table centre and S&F new suitable leg made of 1st class Hard Wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by Engr-in-Charge.

All as per ser item No 55 above but taking out broken/unserviceable top of table centre and supply & fixing new table top of suitable size, made of 18/19 mm thick prelaminated MDF board grade-I, type-I as per IS 14587 (1998) of make as approved by Engr-in-Charge, one side with teak wood shade and balancing white lamination on other side including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and headless pins duly given a coat of high gloss French polish complete all as specified and directed.

All as per ser item No 55 above but broken long rail complete all as specified and directed.

All as per ser item No 55 above but short rail complete all as specified and directed.

All as per ser item No 55 above but broken side stiffener complete all as specified and directed.

All as per ser item No 55 above but supply and fixing of center stiffner 20 mm x 50 mm joining the two side stiffner to make joints stiff irrespective of what is shown in the drawing and as directed by Engr-in-Charge.

Replacement of old unserviceable PVC buffers and supply of ser item No 55 and fixing PVC buffers/rings as per existing size to table center complete all as specified and directed by Engr-in-Charge.

Teapoy (Drawing No FD- 64, 232, 278, 682) : Taking out old unserviceable leg of teapoy and S&F new suitable leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss french polish on newly fixed to match the colour with existing polished surface complete all as specified and directed.

All as per ser item No 62 above but taking out broken/unserviceable top of teapoy and supply & fixing new table top of suitable size, made of 18/19 mm thick prelaminated MDF board grade-I, type-I as per IS 14587 (1998) of make as approved by Engr-in-Charge, exterior grade of suitable size, one side with teakwood shade and balancing white lamination on other side with and including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as specified and directed.

All as per ser item No 62 above but unserviceable top long rail complete all as specified and directed.

All as per ser item No 62 above but unserviceable bottom rail complete all as specified and directed.

Replacement of old unserviceable PVC buffers and S&F PVC buffers/rings as per existing size to Teapoy complete all as directed by Engr-in-Charge .

Table Dining 6/8 Person (Drawing No FD- 30, 239, 273, 376) :- Taking out old unserviceable leg of table dining and supply & fixing new leg made of 1st class Hard Wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by Engr-in-Charge.

All as per ser item No 67 above but unserviceable long rail of suitable size complete all as specified and directed.

All as per ser item No 67 above but unserviceable short rail of suitable size complete all as specified and directed.

All as per ser item No 67 above but taking out unserviceable table top of table dining (6/8 persons), supply & fixing new table top of suitable size, 18 mm thick prelaminated MDF board grade-I, type-I as per IS-14587 (1998) of make as approved by GE/Engr-in-Charge, one side with teak wood shade and balancing white lamination on other side including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all and making joints stiff complete all as specified and directed by Engr-in-Charge.

All as per ser item No 67 above but unserviceable 100 mm x 25 mm stiffners below the top and supply and fixing the new stiffner of suitable size in dovetail joint between long rails size complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of teak wooden coners of 50' x 50' x 40' size joining legs with top rails to make stiff joints complete all as specified and directed by Engr-in-Charge.

Replacement of old unserviceable PVC buffers and S&F PVC buffers/rings of size 20 mm dia and 15 mm height to table dinning 6/8 person complete all as specified and directed by Engr-in-Charge.

Table Dining 4 Person (Drawing No FD/Map-II/03) :- Taking out old unserviceable leg of table dining and supply & fixing new leg made of 1st class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by Engr-in-Charge.

All as per ser item No 74 above but unserviceable long rail of suitable size complete all as specified and directed.

All as per ser item No 74 above but unserviceable short rail of suitable size complete all as specified and directed.

All as per ser item No 74 above but taking out unserviceable table top of table dining (4 persons), supply & fixing new table top of suitable size, made of 18/19 mm thick prelaminated MDF board grade-I, type-I as per IS 14587 (1998) of make as approved by GE/Engr-in-Charge, exterior grade of suitable size, one side with teakwood shade and balancing white lamination on other side including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all and making joints stiff as specified and directed by Engr-in-Charge.

Replacement of old unserviceable PVC buffers and S&F PVC buffers/rings of size 20 mm dia and 15 mm height to table dinning 6/8 person complete all as specified and directed by Engr-in-Charge.

Table 3' X 2' with Drawer (Drawing No FD- 283, 224):- Replacement of leg of table 3’ x 2’ with drawer and supply & fixing new leg made of 1st class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by Engr-in-Charge.

All as per ser item No 79 above but unserviceable long rail complete all as specified and directed.

All as per ser item No 79 above but unserviceable short rail complete all as specified and directed.

All as per ser item No 79 above but unserviceable bottom rail complete all as specified and directed.

All as per ser item No 79 above but unserviceable bottom of drawer with 6 mm plywood BWR of suitable size complete all as specified and directed.

All as per ser item No 81 above but replacement un-serviceable table top of table 3’ x 2’ with drawer and supply & fixing new table top of suitable size, made of 18/19 mm thick prelaminated MDF board grade-I, type-I as per IS 14587 (1998) of make as approved by Engr-in-Charge, exterior grade of suitable size, one side with teak wood shade and balancing white lamination on other side with and including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all making all joints stiff as specified and directed by GE/Engr-in-Charge.

All as per ser item No 81 above but S&F in replacement of 25 mm x 25 mm section track rail with grooves of 12 mm x 12 mm in section complete all as specified and directed by Engr-in-Charge.

All as per ser item No 81 above but S&F in replacement of front of drawer of suitable size with 18 mm thick prelaminated MDF board exterior grade teak wood shade complete with knob duly fixed complete all as specified and directed by Engr-in-Charge.

All as per ser item No 81 above but S&F in replacement of drawers made to size as per drawing complete all as specified and directed by Engr-in-Charge.

Replacement of old unserviceable PVC buffers and S & F PVC buffers/rings of size 20mm dia and 10mm height to Table 3'x2' with drawer as directed by Engr-in-Charge .

Table 3' x 2' without Drawer (Drawing No FD- 284, 223) :- Taking out old unserviceable leg of table 3’ x 2’ without drawer and supply & fixing new leg made of 1st class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by Engr-in-Charge.

All as per ser item No 89 above but unserviceable long rail complete all as specified and directed.

All as per ser item No 89 above but unserviceable short rail complete all as specified and directed.

All as per ser item No 89 above but unserviceable short stiffner/bottom rail complete all as specified and directed.

All as per ser item No 89 above but replacement unserviceable table top of table 3’ x 2’ without drawer and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated MDF board, exterior grade, one side with teak wood shade and balancing white lamination on other side with and including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all and making all joints stiff completed all as specified and directed by Engr-in-Charge.

Replacement of old unserviceable PVC buffers and S&F PVC buffers/rings of size 20 mm dia and 10 mm height for Table 3' x 2' without drawer as directed by Engr-in-Charge.

Table Dressing Ladies (Drawing No FD- 32, 251, 378 & MAP) : Taking down old unserviceable looking mirror of table dressing ladies and S&F new looking mirror 5 mm thick of suitable size complete all as specified. Make:-Modi Guard/Saint Gobain.

All as per ser item No 95 above but the complete box with drawer of table dressing ladies of size and specification as directed by Engr-in-Charge.

All as per ser item No 95 above but S&F in Replacement of old and unserviceable teak wood beanding & 6mm thick ply at the back of the mirror of dressing table with 6 mm thick ply BWR suitable size fixed with teak wood beadiang screws as specified and directed by Engr-in-Charge.

Table Dressing Gents (Drawing No FD-31, 230, 278, DB- 3980 & MAP) :- Taking down unservicable looking mirror of table dressing gents and S&F new looking mirror 5 mm thick of suitable size complete all as specified. Float glass Make : Modi Guard/Saint Gobain

All as per ser item No 98 above but supply and fixing in replacement of knob as approved by Engr-in-Charge.

All as per ser item No 98 above but the complete box with drawer of table dressing gents of size and specification as directed by Engr-in-Charge.

All as per ser item No 98 above but S&F in Replacement of old and unserviceable beading & 6mm thick ply at the back of the mirror of dressing table with 6 mm thick ply BWR suitable size fixed with teak wood beading and screws as specified and directed by Engr-in-Charge.

Table Bed Side (Drawing No FD- 28, 276, 210, DB- 3956, 4049 & MAP) :- Taking out old unserviceable side of table bed side and S&F new side of suitable size made of 18 mm thick pre- laminated MDF board, exterior grade, one side with teak shade fixed with 4 mm x 18 mm teak wood beading to the front side and bottom of side. Further fixing two PVC rings at the bottom of each side complete all as specified and directed by Engr-in-Charge.

All as per ser item No 102 above but taking out old unserviceable bottom and S&F new bottom of suitable size made of 18 mm thick pre- laminated MDF board, exterior grade,one side with teak shade and bottom shall be covered with 4mm size teak wood beading fixed with panel pins on front sides complete all as specified and directed by Engr-in-Charge.

All as per ser item No 102 above but S&F in replacement of top made of 18 mm thick pre- laminated MDF board, exterior grade of suitable size, one side with approved shade of suitable size complete all as specified and directed by Engr-in-Charge.

All as per ser item No 102 above but taking out old unserviceable Center shelf of table bed side and supply and fixing new center shelf of suitable size, made out of 12 mm thick pre- laminated MDF board, exterior grade, one side with teakwood shade fixed with 4mm thick beading on the front duly polished complete all as specified and directed.

All as per ser item No 102 above but taking out old unserviceable back of table bed side and supply and fixing new back made out of 6 mm thick BWR (Boiled water resistance) grade plywood of suitable size complete all as specified and directed.

Table Writing/Table writing JCO Modified (Drawing No FD- 249, 275 DB 3959):- Taking out old unserviceable leg of table writing and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed.

All as per ser item No 107 above but unserviceable side stiffener complete all as specified and directed.

All as per ser item No 107 above but unserviceable centre stiffener complete all as specified and directed.

All as per ser item No 107 above but taking out un-serviceable table top of table writing and S&F new table top of suitable size, made of 18 mm thick pre-laminated MDF board, exterior grade teakwood shade and including all round teak wood beading of 4 mm x 18 mm fixed with adhesive and panel pins duly given a coat of high gloss French polish and making all joints stiff as directed and specified by Engr-In-Charge.

All as per ser item No 107 above but taking out old unserviceable top long rails of table writing and supply & fixing new long rail of suitable size made of 1st class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete. as as directed and specified by Engr-In-Charge.

All as per ser item No 107 above but unserviceable lock and S&F of SS locks 50 mm four levers ISI marked complete all as approved by Engr-in-Charge.

All as per ser item No 107 above but replacement shutter of table writing and S&F new shutter of suitable size complete on all respect, made of 18 mm thick pre-laminated MDF board, exterior grade teak wood shade and including fixing of teak wood beading of 4 mm x 18 mm with adhesive and panel pins on three sides and 10 mm x 18 mm on the fourth wherein shutter is to be fixed with piano hinge of medium quality to the cabinet duly given a coat of high gloss French polish complete all as specified and directed by Engr-in-Charge.

All as per ser item No 107 above but S&F in replacement of side of cabinet with 18mm thick prelaminated MDF board of suitable size complete all as specified and directed by /Engr-in-Charge.

All as per ser item No 107 above but S&F in replacement of shelf with 18 mm thick prelaminated MDF board of suitable size as existing directed by Engr-in-Charge.

All as per ser item No 107 above but S&F in replacement of bottom of cabinet with 18 mm thick prelaminated mdf board of suitable size as existing directed by Engr-in-Charge.

All as per ser item No 107 above but replacement of old unserviceable knobs and supply and fixing by teak wood finished knobs with machine screw and washer of approved quality by Engr-in-Charge.

All as per ser item No 107 above but replacement of old unserviceable PVC buffers and supply item ser No 116 above and fixing by screw PVC buffers/rings as per existing size for Table writing as directed by Engr-in-Charge.

Sofa Set 5 Seater (Drawing No FD- 373, 281):- Taking out old unservicable arm of sofa set 5 seater and S&F new arm of suitable size made out of 1st class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish to match with the existing colour complete al as specified and directed.

All as per ser item No 119 above but broken front leg complete all as specified and directed.

All as per ser item No 119 above but broken rear leg complete all as specified and directed.

All as per ser item No 119 above but broken long rail complete all as specified and directed.

All as per ser item No 119 above but broken side rail complete complete all as specified and directed.

All as per ser item No 119 above but unservicable wooden bearers complete all as specified and directed.

All as per ser item No 119 above but S&F in replacement of wooden rail 30 mm x 50 mm between back legs to support back frame complete all as specified and directed by Engr-in-Charge .

All as per ser item No 119 above but removing old unserviceable cushion compete as per shape & size ref in drg with coolgels-particle PU foam of size 22'' x 21'' x 100/95 mm (Make Sleepwell product Cool Gel-s/Godrej) with upholstery of tapestry cloth of range not less than 450/- meter of shade colour approved by Engr-in-Charge and stiched with chain over provided cushion duly stiched with lining cloth shall be provided.

Sofa Single Seater (FD-281):- Taking out old Unservicable arm of sofa single seater and S&F new arm of suitable size made out of Ist class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish to match with the existing colour complete all as specified and directed.

All as per ser item No 127 above but broken front leg complete all as specified and directed.

All as per ser item No 127 above but broken rear leg complete all as specified and directed.

All as per ser item No 127 above but broken front rail of the seat complete all as specified and directed.

All as per ser item No 127 above but unservicable wooden bearers complete all as specified and directed.

All as per ser item No 127 above but broken side rail of the seat complete all as specified and directed.

All as per ser item No 127 above but removing old unserviceable cushion compete as per shape & size ref in drg with coolgels-particle PU foam of size 22' 'x 21' 'x 100/95 mm (Make Sleepwell product Cool Gel-s/Godrej) with upholstery of tapestry cloth of range not less than 450/- meter of shade colour approved by Engr-in-Charge and stiched with chain over provided cushion duly stiched with lining cloth shall be provided.

All as per ser item No 127 above but S&F in replacement of wooden 30 mm x 50 mm between back legs to support back frame complete all as specified and directed by Engr-in-Charge.

Side Board (Drawing No FD- 26, 241, 371, 372):- Taking out old broken unserviceable leg of side board and supply & fixing new leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high class french polish on newly fixed leg to match the colour with existing polished surfaces complete all as specified and directed.

All as per ser item No 135 above but front and rear long stiffener complete all as specified and directed.

All as per ser item No 135 above but side stiffener complete all as specified and directed.

All as per ser item No 135 above taking out old unserviceable back ply of side board and supply & fixing new back made out of 6 mm thick BWR grade ply wood of suitable size complete all as specified and directed.

All as per ser item No 135 above taking out broken/unserviceable top/bottom of side board and supply & fixing new top of side board suitable size, made of 18 mm thick pre-laminated MDF board and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high class french polish complete all as specified and directed.

All as per ser item No 135 above but S&F in replacement of shutter complete as directed by Engr-in-Charge.

All as per ser item No 135 above but replacement of old unserviceable knobs and supply and fixing by teak fancy knobs with machine screw and washers of approved quality by Engr-in-Charge.

All as per ser item No 135 above but S&F in replacement of 75 mm butt hinges MS cold rolled "medium grade" butt hinges ISI marked

All as per ser item No 135 above but S&F in replacement of Ball catch spring with magnetic catcher of approved quality by Engr-in-Charge.

All as per ser item No 135 above but S&F in replacement of sides as per existing size/specifications complete all as specified and directed.

Bin Soiled Linen (Drawing No FD-244):- Taking out old unservicable back side of Bin soiled linen and supply & fixing new back made out of 6 mm thick commercial grade plywood suitable size complete all as specified and directed by Engr-in-Charge.

All as per ser item No 145 above but taking out old broken unserviceable leg of bin solid and supply & fixing new suitable leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high class french polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed.

All as per ser item No 145 above but removing all/broken plywood from the top of bin solid linen with out damaging the frame and in lieu of providing / fixing 6 mm thick one side teak plywood including preparation of new surfaces and applying high class french polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed.

Table 3' x 3' (900 x 900 mm) (Drawing No FD-291):- Taking out broken/unserviceabel table top of table 3’ x 3’ and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated mdf board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all and make all joints stiff as specified and directed by Engr-in-Charge.

All as per ser item No 148 above but broken side rail complete all as specified and directed.

All as per ser item No 148 above but taking out old broken unserviceable leg of table 3’ x 3’ and supply & fixing new suitable leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed.

All as per ser item No 148 above but S&F in replacement of corners of sides 3" x 3" if thickness 25 mm underneath the top rails and joining the legs complete to make joints stiff and stable as specified and directed by Engr-in-Charge.

Chair Dinning Long Bank (FD-357) : S&F in replacement of unserviceable tapestry cloth form seat and back with new tapestry cloth of range not less than 450/- meter of shade colour approved by Engr-in-Charge.

All as per ser item No 152 above but S&F in replacement of cushion 32 density of 50mm thickness (Make Sleepwell product Cool Gel-s/Godrej) of suitable size of seat and back made to size duly upholstered with tapestry cloth all as specified and directed by Engr-in-Charge. Make -Sleepwell/Kourlon.

All as per ser item No 152 above but S&F in replacement of unserviceable front legs teak wood complete all as specified and directed by Engr-in-Charge.

All as per ser item No 152 above but S&F in replacement of rear legs teak wood of suitable size complete all as specified and directed by Engr-in-Charge.

All as per ser item No 152 above but S&F in replacement of side rails with of teak wood 40 mm x 20 mm made to size as existing complete all as specified and directed by Engr-in-Charge.

All as per ser item No 152 above but S&F in replacement of centre stiffner teak wood 25 mm x 40 mm complete all as specified and directed by Engr-in-Charge.

All as per ser item No 152 above but S&F in replacement of Back/Front rail of seat with new teak wood rail of 75 mm x 20 mm complete all as specified and directed by Engr-in-Charge.

All as per ser item No 152 above but S&F in replacement of Batten with new teak wood batten 70mm x 10mm complete all as specified and directed by Engr-in-Charge.

All as per ser item No 152 above but S&F in replacement of side stiffner teak wood 25 mm x 40 mm complete all as specified and directed by Engr-in-Charge.

Chair Easy with Cushoined : S&F in replacement of unserviceable tapestry cloth form seat and back with new tapestry cloth of range not less than 450/- meter of shade colour approved by Engr-in-Charge.

All as per ser item No 161 above but S&F in replacement of unserviceable foam of seat with coolgels-particle PU foam of 75 mm thickness 32 density suitable size (Make Sleepwell product Cool Gel-s/Godrej) duly upholstered as directed by Engr-in-Charge.

All as per ser item No 161 above but S&F in replacement of unserviceable foam of back with coolgels-particle PU foam of 75 mm thickness 32 density suitable size (Make Sleepwell product Cool Gel-s/Godrej) duly upholstered as directed by GE/Engr-in-Charge.

All as per ser item No 161 above but S&F in replacement of arm with new teak wood arm of 65 x 25 mm of suitable complete all as directed by Engr-in-Charge.

All as per ser item No 161 above but S&F in replacement of unserviceable front legs teak wood as directed by Engr-in-Charge.

All as per ser item No 161 above but S&F in replacement of unserviceable rear legs teak wood as directed by Engr-in-Charge.

All as per ser item No 161 above but S&F in replacement of plywood seat with 6mm thick commercial plywood as directed by Engr-in-Charge.

Almirah Small Shelves (W) : S&F in Replacement of front shutter of almirah medium with shelves with new suitable size or complete all as existing as directed by Engr-in-Charge.

All as per ser item No 168 above but S&F in replacement of unserviceable shelves with new of suitable size or as existingas directed by Engr-in-Charge.

All as per ser item No 168 above but S&F in replacement of unserviceable MS cold rolled (medium grade) butt hinges 50 mm long ISI marked as directed by Engr-in-Charge.

All as per ser item No 168 above but S&F in replacement of hasp and staple of 75 mm size with new aluminum hasp and staple of 75 mm as directed by Engr-in-Charge.

All as per ser item No 168 above but S&F in replacement of unserviceable long front stiffner teak wood at the base of almirah of suitable size complete as directed by Engr-in-Charge.

Book Case (FD-237) : Taking out existing old unserviceable top and bottom of book case and providing new top and bottom made out of 18 mm thick commercial block board, bottom shall be of 18 mm thick plywood commercial inluding polishing complete all as spceified and directed by Engr-in-Charge.

All as per ser item No 173 above but Supply and fixing new shutter double leaf made out of 18 mm thick MDF board one side teak finish and other side commercial fixed with continuous hinges chromium plated (Piano) and polishing complete, 6 mm thick teak wood edging shall be provided, 40 mm plastic knob superior quality in each shutter shall be provided.

All as per ser item No 173 above but S&F shelf from book case and providing new shelf made out of 1st class hard wood (Teak) and bottom of 6 mm thick plywood commercial BWR Gde in each drawer and polishing complete all as directed by Engr -in-Chrage.

Safe Meat FD-47, 369 : S&F in replacement of unserviceable wire mesh from the safe meat and supply and fixing of wire mesh 20 gauze of quality approved by GE from all sides as existing /directed by Engr-in-Charge.

All as per ser item No 176 above but S&F in replacement of legs teak wood of with new of suitable size are as existing as directed by Engr-in-Charge.

All as per ser item No 176 above but S&F in replacement of unserviceable aluminum hasp and staple size 75mm long directed by Engr-in-Charge.

All as per ser item No 176 above but S&F in replacement of aluminum handle 100 mm long directed by Engr-in-Charge.

All as per ser item No 176 above but S&F in replacement of unserviceable bottom rail of 50 mm x 19 mm of teak wood complete as directed by Engr-in-Charge.

All as per ser item No 176 above but S&F top rails complete directed by Engr-in-Charge.

All as per ser item No 176 above but S&F in replacement of 19 mm thick teak wood plank of suitable size at the back as directed by Engr-in-Charge.

All as per ser item No 176 above but S&F in replacement of teak wood plank 19 mm thick of suitable size at the bottom as directed by Engr-in-Charge.

All as per ser item No 176 above but M&L for painting a coat of white synthetic paint superior quality (glossy) over a coat of preimer to all wooden surface with spray machine as per standard workmanship as directed by Engr-in-Charge. Make- Asian/Berger/Nerolac.

Hat Stand (FD-46, 363, 364) : S&F in replacement of unserviceable mirror of hat stand with new mirror 5mm thickness 300 mm x 460 mm complete as existing of quality approved by GE and as directed by Engr-in-Charge.

All as per ser item No 185 above but S&F in replacement of unserviceable pegs teak wood of hat stand with new peg so as to match the existing pegs of size as existing and quality approved by Engr-in-Charge.

All as per ser item No 185 above but S&F in replacement of unserviceable MDF board with new mdf board of 18 mm thickness of exterior grade with one side teak wood approved by Engr-in-Charge

All as per ser item No 185 above but S&F in replacement of teak wood beading 6 mm x 3 5mm edges round all round complete as specified and directed by Engr-in-Charge.

All as per ser item No 185 above but S&F in replacement of unserviceable metal key plates of suitable size as specified and directed by Engr-in-Charge.

Table 5' X 2' 10" (W) FD-498 : S&F in replacement of unserviceable legs with new 1st class teak wood legs 50 mm x 50 mm in section of top 40 mm x 40 mm in section of bottom complete as specified and directed by Engr-in-Charge.

All as per ser item No 190 above but S&F in replacement of unserviceable long rail 1st class teak wood 25mm x 100mm complete all as specified and directed by Engr-in-Charge.

All as per ser item No 190 above but S&F in replacement of short rail 1st class teak wood complete all as specified and directed by Engr-in-Charge.

All as per ser item No 190 above but S&F in replacement of unserviceable top with new top made of 18mm thick prelaminated mdf board of teak vaneer exterior grade fixed with 4mm thick teak wood beading on the edges duly french polished complete all as specified and directed by Engr-in-Charge.

All as per ser item No 190 above but S&F in replacement of side stiffners 1st class teak wood 25 mm x 50mm of suitable size existing complete all as specified and directed by Engr-in-Charge.

All as per ser item No 190 above but S&F in replacement of centre stiffner 1st class teak wood 25mm x 50mm of suitable size as existing complete all as specified and directed by Engr-in-Charge.

All as per ser item No 190 above but S&F in replacement of unservicable wooden plank on the top with new wooden plank of suitable size as existing complete all as specified and directed by Engr-in-Charge.

Bin Ssoiled Linen Multipurpose (FD/E6/MAP/09) : Taking out existing old unserviceable top and bottom of bin soiled linen multipurpose and providing new top and bottom made out of 18 mm thick pre-laminated particle board including 4 mm thick teak wood edging all aroung the top complete all as specified and directed.

All as per ser item No 190 above but taking out unserviceable plywood from bin soiled linen multipurpose back side and providing new 6 mm plywood including 4 mm teak wood deiging duly polishing complete all as specified and directed.

All as per ser item No 190 above but taking out old unserviceable drawer from bin soiled linen multipurpose and providing new drawers made out of 18 mm particle board including and polishing complete all as specified and directed by Engr-in-Charge.

Almirah Large with Shelves (DB-4116) : Supply and fixing shelf made out of 20 mm thick second class hard wood plank of size 1050 mm x 500mm, polishing with Hi-gloss French polish including preparation of surfaces and taking out existing unserviceable shelf complete all as specified, shown on drawing and as directed.

Supply and fixing in replacement haps and staple aluminium anodised of size 100 mm (as per sample) complete all as specified, shown on drawing and as directed.

TV Trolley (FD/E6/MAP/04(R) : Taking out existing old unserviceable top of TV trolley and providing new top of made out of 18 mm thick Pre- laminated particle board including 4 mm thick teak wood edging all aroung the top complete all as specified and directed.

All as per ser item No 202 above but S&F old unsv back of TV trolley and providing new back of made out of 18 mm thick Pre-laminated particle board complete all as specified and directed.

All as per ser item No 202 above but S&F old unsv side of TV trolley and providing new side of made out of 18 mm thick Pre- laminated particle board complete all as specified and directed.

All as per ser item No 202 above but S&F in replacement of Ball catch spring with magnetic catcher of approved quality by Engr-in-Charge.

Computer Table Companion C2. Make : Godrej : Taking out existing old unserviceable top of computer table and providing new top of made out of 18 mm thick pre-laminated MDF board, exterior grade of suitable size, one side with teak shade and balancing white lamination on other side complete all as specified and directed.

All as per ser item No 206 above but S&F new side of made out of 18 mm thick pre-laminated MDF board, exterior grade of suitable size, one side with teak shade and balancing white lamination on other side complete all as specified and directed.

All as per ser item No 206 above but S&F new key board of made out of 18 mm thick pre-laminated MDF board, exterior grade of suitable size, one side with teak shade and balancing white lamination on other side with channel complete all as specified and directed.

Side Rack 3/4 Space (DB 4123): S&F in replacement of front leg of side rack 3/4 space new suitable size or complete all as existing as directed by Engr-in-Charge.

All as per ser item No 209 above but S&F replacement of rear leg of side race 3/4 space new teak wood leg suitable size or complete as existing as directed by Engr-in-Charge.

All as per ser item No 209 above but S&F replacement of wooden shelf of side race 3/4 space new teak wood shelf suitable size or complete as existing as directed by Engr-in-Charge.

Table Office Clk Wooden (Drawing No DB-4120) :- Taking out old unserviceable leg of table office clk wooden and supply & fixing new leg made of 1st class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by Engr-in-Charge.

All as per ser item No 212 above but unserviceable long rail of suitable size complete all as specified and directed.

All as per ser item No 212 above but unserviceable short rail of suitable size complete all as specified and directed.

All as per ser item No 212 above but taking out unserviceable table top of table office clk wooden, supply & fixing new table top made of teak wood suitable size or complete as existing as directed by Engr-in-Charge.

All as per ser item No 212 above but unserviceable stiffners below the top and supply and fixing the new stiffner of suitable size in dovetail joint between long rails size complete all as directed by Engr-in-Charge.

Replacement of old unserviceable PVC buffers and S&F PVC buffers/rings of size 20 mm dia and 15 mm height to table as directed by Engr-in-Charge .

Table Office Officer Wooden (Drawing No DB-4119) : Taking out old unserviceable leg of table and supply & fixing new leg made of 1st class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by Engr-in-Charge.

All as per ser item No 218 above but unserviceable long rail of suitable size complete all as specified and directed.

All as per ser item No 218 above but unserviceable short rail of suitable size complete all as specified and directed.

All as per ser item No 218 above but taking out un-serviceable table top of table office offier wooden, supply & fixing new table top made of teak wood suitable size or complete as existing as directed by Engr-in-Charge.

All as per ser item No 218 above but taking out unserviceable table drawer of table office officer wooden, supply & fixing new drawer made of teak wood suitable size or complete as existing as directed by Engr-in-Charge.

All as per ser item No 218 above but unserviceable stiffners below the top and supply and fixing the new stiffner of suitable size in dovetail joint between long rails size complete as directed by Engr-in-Charge.

Replacement of old unserviceable PVC buffers and S&F PVC buffers/rings of size 20 mm dia and 15 mm height to table as directed by Engr-in-Charge.

CANNING :- Removing old canning from existing wooden furniture (any type) and supply & re-canning with virgin white plastic cane 2 mm wide and 0.4mm thick for seat and back and 3.00 mm wide and 0.6mm thick for border, oval shape (half round) as per Godrej pattern complete all as specified and directed.

POLISHING :- Preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfaces with sand paper (mannually/by grinder machine), removing pluck marks with wooden scraper, cleaning of dirt and stopping holes by filling putty by adding colour of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surface with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish of 1st quality as per manufacturer’s instructions till glossy finish is achieved for the following furniture items complete all as specified and directed by Engr-in-Charge. Note - To be carried out at site/furniture yard at all items.

Almirah large/medium with shelf (Drg Nos FD-1031/ 351, 350/243)

Bed Newar and Bed Plywood Top (Drawing No FD-21, 245, 246, 247, 214, 3970)

Book Shelf open Small

Book Shelf open Large

Book case library pattern

Bin soiled linen small

Book case

Chair Easy Cushioned

Chair Dinning Long Back

Chair Dining (Drawing Nos FD-16, 279, 228, 203)

Chair Easy (Drawing No FD-229)

Chair writing (Drawing No FD-250, 280)

Chair Wooden Bottom Without Arm (Drawing No FD- 56, 225, 285)

Hat stand with mirror

Sofa Chair single

Side Board

Stool Dressing CB (Drawing No 27, 252, 274)

Sofa Set 5 Seater (Drawing No FD- 373, 281)

Table Peg (Drawing No FD- 25, 236, 277)

Table Centre (Drawing No FD-29, 274, 235)

Teapoy (Drawing No FD- 64, 232, 278)

Table Dining 6/8 Person (Drawing No FD- 30, 239, 273, 376)

Table 3' X 2' with/without Drawer (Drawing No FD- 283, 284, 223, 224)

Table Dressing Ladies (Drawing No FD-251, 378)

Table Dressing Gents (Drawing No FD-31, 230, 278, DB- 3980)

Table Bed Side (Drawing No FD- 28, 248, 276, 210, DB- 3956, 4049)

Table Writing (Drawing No FD- 249, 33.275 DB 3959)

Table JCO Modified

Table office clk wooden

Rack 3/4 spaces

Bin linen multipurpose (FD/E6/MAP/09)

Table 900 mm x 900 mm

Table office officer

Table 5' x 2'10''

Schedule of credit amount of Rs. 92,988.00 to be deducted during AOC

Satya & Sons

Budget Furniture Industries