Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 CrAdmitted-Finance | ₹1.4 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.5 Cr+₹6.8 L (4.74%)Admitted-Finance | ₹1.5 Cr+₹6.8 L (4.74%) | L2 | Admitted-Finance |
| 3 | L3₹1.7 Cr+₹24.2 L (16.8%)Admitted-Finance | ₹1.7 Cr+₹24.2 L (16.8%) | L3 | Admitted-Finance |
| 4 | L4₹1.7 Cr+₹30.5 L (21.2%)Admitted-Finance | ₹1.7 Cr+₹30.5 L (21.2%) | L4 | Admitted-Finance |
| 5 | L5₹1.8 Cr+₹35.8 L (24.8%)Admitted-Finance | ₹1.8 Cr+₹35.8 L (24.8%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | PIYUSH ENTERPRISES L6 | RAUT ENTERPRISES L1 | M/s.Bhushan J Pawade L2 | M/S DATTATRAY CONSTRUCTION L3 | RACHCON INFRAPROJECTS Pvt Ltd L4 | M/s. P.N.MORE L5 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Providing, painting, finishing walls with two coats of anti-algae, weather proof acrylic smooth emulusion paint of approved make with silicon additives, rutile titanium dioxide and other selected pigment and fungicide conformingto IS 5411 Part- I & II of approved shade and colour (from approved manufacturer) on sand face plaster/ plain plaster & concrete surfaes at all elevations of required shade over a base coat of exterior cement primer including preparation of the surfaces to be painted, fillers , putti, stops, including scaffolding, sand papering and cleaning surfaces, protecting, cleaning and curing with all materials, necessary equipment, labour, scaffolding etc. complete as per specifications and as directed by the Engineer-in-charge. | 16,500 | Sq.m | 165 ₹27,22,500 | 100 ₹16,50,000 Lowest | 130 ₹21,45,000 | 135 ₹22,27,500 | 170 ₹28,05,000 | 150 ₹24,75,000 |
| 2.00 | Providing and painting two or more coats with Epoxy paint at all locations prepared and applied as per manufacturer' specifications including a priming coat if specified by the manufacturer, to to interior walls, columns, beams, ceiling at all elevations including preparation of surface by cleaning with wire brush, making good of irregularities more than 3mm using grinders/corborandum stones and rubbing with sand paper to remove dust, dirt etc, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping, applying sand paper, cleaning with wire brush and rubbing, making free of rust, dirt etc. filling the holes, joints, cracks if any including using necessary exhaust fans for release of gas, scoffolding arrangements, all materials, tools - tackles, equipment , materials, labour, cleaning necessary equipment, labour etc. complete all as per manufacturers technical data and as directed at site to acheive 200 micron film thickness (50 micron primer coat + 150 micron finishing coat). | 25,000 | Sq.m | 385 ₹96,25,000 | 300 ₹75,00,000 | 285 ₹71,25,000 Lowest | 355 ₹88,75,000 | 320 ₹80,00,000 | 350 ₹87,50,000 |
| 3.00 | Painting with two or more coats of synthetic enamel paint of approved manufacturer to give an even shade on new work to interior walls , columns, beams, and ceiling at all elevations including preparation of this surface to be painted applying primer coat of cement paint, fillers, putti, stops, including scaffolding, sand papering and cleaning surfaces, protecting, cleaning and curing with all materials, necessary equipment, labour etc., all complete to the satisfaction of the Engineer In-charge. | 27,000 | Sq.m | 155 ₹41,85,000 | 88 ₹23,76,000 Lowest | 120 ₹32,40,000 | 105 ₹28,35,000 | 145 ₹39,15,000 | 140 ₹37,80,000 |
| 4.00 | Painting (two coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacturer over and including a priming coat of ready mixed zinc chromate yellow primer on new work Pipes of all diameter including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge | 414 | Sq.m | 150 ₹62,100 | 110 ₹45,540 | 175 ₹72,450 | 125 ₹51,750 | 110 ₹45,540 | 90 ₹37,260 Lowest |
| 5.00 | Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge | 2,000 | Sq.m | 150 ₹3,00,000 | 110 ₹2,20,000 | 130 ₹2,60,000 | 100 ₹2,00,000 Lowest | 140 ₹2,80,000 | 100 ₹2,00,000 Lowest |
| 6.00 | Providing, supplying and fixing air tight hollow metal flush steel doors 40 mm thick of approved make consisting of door frame and shutters and all hardware fittings, frame made out of 14g thick G.I sheets and shutters made of 16g thick sheets, hollow portion filled with puff, including necessary stiffners in shutters and frame, vision panel of specified size with 4 mm glass and clip on pressed steel frame for vision panels, fixing 4 nos heavy duty stainless steel 304 grade ball bearing hinges, mortise / dead lock of approved make, a pair of 200 mm long stainless steel handles, 250 mm long stailless steel tower bolt, etc. frame hollow portion filled with PCC 1:2:4, necessary hold fast embedded in concrete, fixing in concrete with anchor fastners. finished with Polyurethane painting of approved colour complete all as per drawings and specifications and as directed by the Engineer-in-charge | 225 | Sq.m | 12,900 ₹29,02,500 | 9,000 ₹20,25,000 | 6,700 ₹15,07,500 Lowest | 8,500 ₹19,12,500 | 7,500 ₹16,87,500 | 10,000 ₹22,50,000 |
| 7.00 | Providing and fixing colour anodized aluminium work (Minimum anodizing thickness of 15 micron) for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) | 1,000 | Kg | 630 ₹6,30,000 | 475 ₹4,75,000 | 525 ₹5,25,000 | 575 ₹5,75,000 | 600 ₹6,00,000 | 400 ₹4,00,000 Lowest |
| 8.00 | Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862: 2000 of category III type B as per standard sizes fixed with self-drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. (cost of frame work to be paid separately) | 200 | Sq. M | 995 ₹1,99,000 | 600 ₹1,20,000 | 1,100 ₹2,20,000 | 750 ₹1,50,000 | 650 ₹1,30,000 | 500 ₹1,00,000 Lowest |
Tender Value
₹1.8 Cr
Closing Date
18 Jan 2022, 3:00 pmClosed
Project Director, INRPC
PD Office, INRPC, NRB, BARC Tarapur-401502, Dist.- Palghar, Maharashtra
Miscellaneous civil works in INRP at BARC Tarapur
2021_NRB_663761_1
BARC/NRB/INRPC/PTC-91/2021/958
Open Tender
Civil Works
Item Rate
540 days
BARC Tarapur
As per NIT
8 documents required · 8 mandatory
₹0
Exempted
PD Office, INRPC, NRB, BARC Tarapur
1 Apr 2022
20 Dec 2021
19 Jan 2022
20 Dec 2021
18 Jan 2022
10 Jan 2022
20 Dec 2021 - 4 Jan 2022
5 Jan 2022
Amount
Providing and painting two or more coats with Epoxy paint at all locations prepared and applied as per manufacturer' specifications including a priming coat if specified by the manufacturer, to to interior walls, columns, beams, ceiling at all elevations including preparation of surface by cleaning with wire brush, making good of irregularities more than 3mm using grinders/corborandum stones and rubbing with sand paper to remove dust, dirt etc, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping, applying sand paper, cleaning with wire brush and rubbing, making free of rust, dirt etc. filling the holes, joints, cracks if any including using necessary exhaust fans for release of gas, scoffolding arrangements, all materials, tools - tackles, equipment , materials, labour, cleaning necessary equipment, labour etc. complete all as per manufacturers technical data and as directed at site to acheive 200 micron film thickness (50 micron primer coat + 150 micron finishing coat).
Painting with two or more coats of synthetic enamel paint of approved manufacturer to give an even shade on new work to interior walls , columns, beams, and ceiling at all elevations including preparation of this surface to be painted applying primer coat of cement paint, fillers, putti, stops, including scaffolding, sand papering and cleaning surfaces, protecting, cleaning and curing with all materials, necessary equipment, labour etc., all complete to the satisfaction of the Engineer In-charge.
Painting (two coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacturer over and including a priming coat of ready mixed zinc chromate yellow primer on new work Pipes of all diameter including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge
Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge
Providing, supplying and fixing air tight hollow metal flush steel doors 40 mm thick of approved make consisting of door frame and shutters and all hardware fittings, frame made out of 14g thick G.I sheets and shutters made of 16g thick sheets, hollow portion filled with puff, including necessary stiffners in shutters and frame, vision panel of specified size with 4 mm glass and clip on pressed steel frame for vision panels, fixing 4 nos heavy duty stainless steel 304 grade ball bearing hinges, mortise / dead lock of approved make, a pair of 200 mm long stainless steel handles, 250 mm long stailless steel tower bolt, etc. frame hollow portion filled with PCC 1:2:4, necessary hold fast embedded in concrete, fixing in concrete with anchor fastners. finished with Polyurethane painting of approved colour complete all as per drawings and specifications and as directed by the Engineer-in-charge
Providing and fixing colour anodized aluminium work (Minimum anodizing thickness of 15 micron) for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)
Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862: 2000 of category III type B as per standard sizes fixed with self-drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. (cost of frame work to be paid separately)
M/s.Bhushan J Pawade
M/S DATTATRAY CONSTRUCTION
RACHCON INFRAPROJECTS Pvt Ltd
M/s. P.N.MORE
PIYUSH ENTERPRISES
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.26 MB
TenderDocPTC-91.pdf
Tender Documents • 7.14 MB
BOQ_698645.xls
BOQ • 0.28 MB
TechnicalBid_Ptc-91.xls
Additional Documents • 0.06 MB
BidSecurityDeclarationPTC-91.pdf
Tender Documents • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .