CERTAIN B/R REPAIR TO OTM AND MD ACCN INCLUDING DAILY COMPREHENSIVE MAINTENANCE SERVICES IN ZONE A AT SUNJUWAN UNDER GE JAMMU

Amount

B/R Portion: - Supply and fixing 20mm outer dia CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings on concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down 15mm steel tubing complete all as specified and as directed.

Supply and fixing 25mm outer dia CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings on concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down 20mm steel tubing complete all as specified and as directed.

Taking up or down and refixing 20mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and as directed.

Supply and fixing in repairs Stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm including 40mm bore PTMT Waste coupling, fixing in cement mortar onto dwarf wall or fixing cantilever brackets complete all as specified and as directed.

Supply and fixing in repairs Stainless steel plate rack made out of 1mm thick sheet of size 750 x 600 x 250mm of size having partition and fixed with steel fasteners or steel screwed complete all as specified and as directed.

Supply and fixing in repair Vitreous china wash down water closet pan with flushing cistern (one piece) including fixing bolts, soft closer seat cover and flush pipe with 'P' trap connecting pipe complete all as specified and as directed. Make: - Cera Cat Part No: S1013230 or equivalent in makes as specified in Group - 1 of Appx 'F'.

Supply and fixing in repairs Vitreous china wash down water closet (Pedestal Pattern) 'P' or 'S' trap (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with recessed bottom and connection to drain or outgoing pipe and flushing pipe complete all as specified and as directed.

Supply and fixing in repair Vitreous china squatting pan 'Orrisa' pattern size 580 x 440 mm white with integral foot rest, 'P' or 'S' trap and lime concrete bedding complete making good disturbed ground complete all as specified and as directed.

Supply and fixing in repairs 10 litres capacity PVC low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc complete all as specified and as directed.

Supply and fixing in repair Vitreous china urinal, half stall type, white (minimum), with including 32mm bore PTMT waste coupling and PVC connection pipe of 15mm x 450mm long and PVC waste pipe 32mm bore complete all as specified and as directed.

Supply and fixing in repairs Vitreous china bowl urinal flat back, with grating and union for discharge pipe including 32mm bore PTMT Waste coupling, PVC connection pipe of 15mm x 450mm long and 32mm PVC Waste pipe complete all as specified and as directed.

Supply and fixing in repairs Vitreous china wash hand basin, oval shape counter top, any coloured including 32mm bore PTMT waste coupling, PVC connection pipe of 15mm x 450mm long and 32mm PVC waste pipe complete all as specified and as directed. Make: - Cera Cat Part No : S2030102 or equivalent in makes as specified in Group - 1 of Appx 'F'.

Supply and fixing in repairs Vitreous china wall hang wash hand basins including 32mm bore PTMT waste coupling, waste pipe and PVC connection pipe of 15mm x 450mm long complete all as specified and as directed. Make: - Cera Cat Part No : S2040121 or equivalent in makes as specified in Group - 1 of Appx 'F'.

Supply and fixing in repair Vitreous china pedestal for wash hand basins complete all as specified and as directed.

Supply and fixing in repairs PVC cabinet with mirror of size 330 x 430mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs 15mm bore chromium plated wall mixer with bend pipe for overhead shower pipe for mixing hot and cold water with connecting legs and wall flanges screwed down for iron pipe and fixed complete all as specified and as directed. Make: - Cera Cat Part No : F2006402 or equivalent in makes as specified in Group - 1 of Appx 'F'.

Supply and fixing in repairs 15mm bore chromium plated basin/ Sink mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs 15mm bore bib tap (2 in 1 type) of brass, glossy finish complete all as specified and as directed.

Supply and fixing in repairs 15mm bore pillar taps, cast copper alloy fancy type with capstan heads, chromium plated screwed down high pressure, screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs 15mm bore chromium plated pillar tap swan neck with swinging spout of brass, glossy finish complete all as specified and as directed.

Supply and fixing in repairs 15mm bore angle/ stop cock of chromium plated, glossy finish complete all as specified and as directed.

Supply and fixing in repairs 15mm bore stop valves, fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm bore pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect all as specified and as directed.

Supply and fixing in repair water closet seat with plastic water closet seat black/ white closed pattern with recessed bottom and cover and mild steel chromium plated or aluminium device complete all as specified and as directed.

Supply and fixing in repairs tubular towel rail 20mm dia 'D' type 60cm long between flanges chromium plated complete all as specified and as directed.

Supply and fixing in repair towel ring chromium plated complete all as specified and as directed.

Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 45cm long and 15cm wide with chromium plated bracket guard and railing complete all as specified and as directed.

Supply and fixing in repairs chromium plated 32/ 40mm bore waste coupling (half or full threaded), (minimum weight 45 grams) complete all as specified and as directed.

Supply and fixing in repairs PVC connection 450mm long of 15mm bore with pair of brass check nuts complete all as specified and as directed.

Supply and fixing in repairs PVC waste pipe 32mm bore for WHB/ Sink/ Urinal complete all as specified and as directed.

Supply and fixing in repairs chromium plated Toilet paper holder complete all as specified and as directed.

Supply and fixing in repairs chromium plated soap dish of chromium plated complete all as specified and as directed.

Supply and fixing in repairs chromium plated grating doom 100mm dia complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tanks 2000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part - I including dismantling of existing water tank, including 20mm ball valves, 20mm tank nipple complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part - I including dismantling of existing water tank, including 20mm ball valves, 20mm tank nipple complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing rotational moulded polyethylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part - I including dismantling of existing water tank, including 20mm ball valves, 20mm tank nipple complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs 20mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grams) complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs PVC water tank covers required for 500 litres to 1000 litres PVC water tanks complete all as specified and as directed.

Cleaning and removal of scale and dirt etc exceeding 250 and not exceeding 500 litres of capacity tanks and from mouths of circulating pipes etc. complete all as specified and as directed.

Cleaning and removal of scale and dirt etc exceeding 500 and not exceeding 1000 litres of capacity tanks and from mouths of circulating pipes etc. complete all as specified and as directed.

Cleaning and removal of scale and dirt etc exceeding 1000 and not exceeding 2000 litres of capacity tanks and from mouths of circulating pipes etc. complete all as specified and as directed.

Supply and fixing in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls/ floor etc complete all as specified and as directed.

Supply and fixing in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls/ floor etc complete all as specified and as directed.

Material and labour in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete all as specified and as directed.

Supply and fixing in repairs PVC (SWR) bends/ Tee/ Y 110mm dia any radius with access door complete all as specified and as directed.

Supply and fixing in repairs PVC (SWR) bends/ Tee/ Y 75 mm dia any radius with access door complete all as specified and as directed.

Supply and fixing in repairs PVC (SWR) vent cowl 110mm bore complete all as specified and as directed.

Supply and fixing in repairs PVC (SWR) vent cowl 75mm bore complete all as specified and as directed.

Dismantling floors hearth or wall tilling including cement mortar bedding (but not backing) removing unserviceable materials outside MOD area and rubbish off the premises complete all as specified and as directed.

Material and labour non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. fixed with approved tile adhesive and provided with 4mm spacer, spacer gaps to be filled with approved epoxy grout complete all as specified and as directed by Engineer-in-Charge.

Material and labour non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) in vertical surface such as skirting, dado etc. fixed with approved tile adhesive and provided with 4mm spacer, spacer gaps to be filled with approved epoxy grout complete all as specified and as directed by Engineer-in-Charge.

Material and labour non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile not exceeding 0.18 Sqm, in floors etc. fixed with approved tile adhesive and provided with 4mm spacer, spacer gaps to be filled with approved epoxy grout complete all as specified and as directed by Engineer-in-Charge.

Material and labour Glazed ceramic tiles 300 x 450 x 7mm thick on vertical surface such as in skirting, dado etc. fixed with approved tile adhesive and provided with 4mm spacer, spacer gaps to be filled with approved epoxy grout complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and complete removal of debris outside MOD land complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and including necessary form work complete all as specified and as directed.

Material and labour for PCC 25mm thick (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregate) in sub base for floor tiles complete all as specified and as directed.

Material and labour for PCC 75mm thick (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) in plinth protection/ path finished even and fair complete all as specified and as directed.

Material and labour for PCC 75mm thick (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) in sub base complete all as specified and as directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete all as specified and as directed.

Material and labour Granite (of any type) 16-20mm thick (tabled rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar (1:6) edges of slab to be rounded from all sides (including cutting, wastage and polishing) complete all as specified and as directed.

Supply and fixing Machine cut kota stone slab flooring 16-20mm thick over 15 mm thick cement screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Machine cut kota stone slab 16-20mm thick over 10 mm thick as in vertical surface over rendering in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Coloured chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigment etc and screed bed or bedding layer of mortar 20mm thick (1:4) for laying floor finishes complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Taking down shutters of any description not exceeding 1 Sqm each and refixing in the same opening after easing and adjusting complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each and refixing in the same opening after easing and adjusting complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt) and removing from site complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and not exceeding 4 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt) and removing from site complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Material and labour factory made pressed steel frames of size 105 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25 x 25 x 3mm angle iron projecting 10cm on either side including PCC (1:3:6) type C-0 in back filling of chowkhats and two coats of synthetic enamel paint over one shop coat of zinc chromate primer on all exposed surface complete and one coat of tar on the ends of steel surface in contact with bricks/ concrete surface. Colour/ shade will be approved by Engineer-in-Charge complete all as specified and as directed.

Material and labour factory made pressed steel frames of size 125 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25 x 25 x 3mm angle iron projecting 10cm on either side including PCC (1:3:6) type C-0 in back filling of chowkhats and two coats of synthetic enamel paint over one shop coat of zinc chromate primer on all exposed surface complete and one coat of tar on the ends of steel surface in contact with bricks/ concrete surface. Colour/ shade will be approved by Engineer-in-Charge complete all as specified and as directed.

Supply and fixing 35mm thick second class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 35mm thick factory made second class hard wood, glazed and skelton shutter open rebated and prepared to receive glass, guage, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2009 Part-I Section 8.24 (b) supplied and fitted to chowkhats complete all as specified and as directed.

Material and labour preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Supply and fixing pre-painted (factory painted) box type mild steel windows/ Ventilator (factory made) outer frame made out ERW tube 'P' section 65 x 45 x 25 mm and shutter of ERW tube 'P' section 50mm x 35mm x 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter fixed with galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm including necessary GI wire staples etc on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler/ AC window complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3 and all as directed. Notes: - The quoted rates shall also include: - (i) Two coats of synthetic enamel paint over one shop coat of zinc chromate primer on all exposed surface complete and one coat of tar on the ends of steel surface in contact with bricks/ concrete surface. Colour/ shade will be approved by Engineer-in-Charge. (ii) 4 no's MS steel lugs made of 20 x 5 mm Iron flat 200 mm long. (iii) 10 mm Sq Bar grill/ guard bar design as per drawing. (iv) PCC block for embedding lugs complete. (iv) Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete. (v) 3mm thick ordinary glass sheet quality and glazing with oil putty including glazing pins or spring clips.

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows and other frames/ chowkhat of size 45 x 70 mm (+5 mm) comprising of virgin PVC polymer of 'K' value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class 'A' category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with mild steel hold fast/ lugs/ Stainless steel dash fasteners of required dia and length complete all as specified and as per directions of Engineer-in-Charge.

Supply and fixing 28 to 30mm thick (stile) factory made solid PVC moulded door shutter with wood free EPS, with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supply and fixing in frame at site as per specifications and drawing shown in SSR complete all as specified and as directed.

Supply and fixing in repairs 18mm thick factory made prelaminated solid PVC board for wardrobe shutter/ kitchen cabinet shutter/ shelves in any colour including PVC edge tape for edging of all around of shutters and exposed faces of same colour complete all as specified and as directed.

Material and labour in repairs 18mm thick prelaminated particle board interior grade, both side laminated with decorative choice, fixed with screws to timber frames work for shutters of wardrobes, cabinets etc including PVC edge tape for edging of all around of shutters and exposed faces of same colour complete all as specified and as directed.

Removing unserviceable builder's hardware such as bolt, handle, stoppers, etc., of any specification/ size complete all as specified and as directed.

Supply and fixing stainless steel auto closing hinges for fixing in kitchen cabinet shutter/ wardrobe shutter with self closing mechanism which allows the cabinet door to close smoothly complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 100mm hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fixing butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100 mm long complete all as specified and as directed.

Supply and fixing aluminium anodised bow handle fabricated type extruded section of 150mm long complete all as specified and as directed.

Supply and fixing aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed.

Supply and fixing 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing mild steel helical door spring 300mm including roller and roller plate complete fixed with welding to existing steel chowkhats complete all as specified and as directed.

Supply and fixing 150 mm over all length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair curtain rods, mild steel, chromium plated with fixing brackets, stops, side finnels etc complete with all fittings complete all as specified and as directed.

Supply and fixing anodised aluminium frame powder coating (minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partitions with one or more rebates including jointing cleats for fixing etc. complete all as specified and as directed.

Supply and fixing anodized aluminium door shutters powder coating (minimum thickness of powder coating 50 micron), aluminium section weighing not exceeding 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 No's in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed.

Supply and fixing anodised aluminium window and ventilator shutters powder coating (minimum thickness of powder coating 50 micron), side hung/ sliding type without sash bars, aluminium sections weighing not exceeding 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones (including all necessary scaffolding, lifting arrangement upto 12 mtr height) complete all as specified and as directed.

Supply and fixing sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including glazing pins or spring clips, (including all necessary scaffolding, lifting arrangement upto 12 mtr height) complete all as specified and as directed.

Supply and fixing sheet glass 3mm figured glass pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane including glazing pins or spring clips, (including all necessary scaffolding, lifting arrangement upto 12 mtr height) complete all as specified and as directed.

Material and labour sheet glass 5.5mm thick, ordinary quality and glazing with oil putty in any size complete all as specified and as directed.

Supply and fixing galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply and fixing in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply and fixing 12mm toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed.

Supply and fixing glass door handle stainless steel 450mm length, 30mm dia for 12mm thick toughened glass door shutter complete all as specified and as directed.

Supply and fixing glass door lock stainless steel for 12mm thick toughened glass door shutter complete all as specified and as directed.

Material and labour welding in repairs exceeding 2.5cm but not exceeding 5.0cm in length and not exceeding 6mm thickness of metal including cleaning and preparing the surface complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated or semicorrugated etc) sheets in roof covering complete all as specified and as directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Supply and fixing 4mm thick of size 605 x 605 mm, white pre-premiered, self embossed, reinforced designer board for false ceiling conforming to IS-14862 and ISO-8336:1993 and GI section frame work (powder coated) for white, pre-premiered, self embossed, reinforced designer board consisting of perimeter wall angle 19mm x 19mm x 0.45mm, cross 'Tee' 28.6mm (web) x 24mm flange. 33mm thick powdered coated main tee 38 (Web) x 24mm flange 0.33mm thick. Wall angle screwed fixed to brick wall/ partition wall/ concrete/ RCC with the help of nylon sleeves and screws @ 610 mm centre to centre, then suspending GI main 'Tee' in both directions by means of hangers with alignment @ 1220mm centre to centre to soffits. To from grid of 610 x 610mm cross Tee shall be provided @ 610mm centre to centre in both directions. Suitable provisions shall be made for fixing the recessed/ surface mounting light fittings if any complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 5mm thick prelam PVC sheet in strips and channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining and solid PVC partitions inclusive of solvent cement and fixing at site including 1mm thick in lipping in case of PVC sheet in heat bent as lipping on the edges complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed.

Material and labour brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed.

Description all as per Ser item No 118.00 here-in-before but except bricks complete all as specified and as directed.

Taking down cement plaster of any description on brick walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc. complete removal of debris outside MOD land (including all necessary scaffolding, lifting arrangement upto 12 mtr height) complete all as specified and as directed.

Material and labour rendering 5mm thick on fair faces of concrete surface of ceiling in cement mortar (1:3) surface finished even and smooth surface without using extra cement complete all as specified and as directed.

Material and labour rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar (1:6) surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour rendering 15mm thick in cement mortar (1:4) on fair faces of brick surface finished even and fair including water proofing compound (including all necessary scaffolding, lifting arrangement upto 12 mtr height) complete all as specified and as directed.

Material and labour capillary rise treatment of walls, base coat : Berger HS Latex plus (or equivalent), Consumption base coat : 0.3 Kg/ Sqm, Second and Third coat : Latex shield 2K (or equivalent), Consumption top coat : 3 Kg/Sqm, System requirements : density : 2.00 Kg/Ltr, Compressive strength : 0.5 N/Sqmm complete all as specified and as directed.

Material and labour preparing of new plastered surface of ceiling and applying two coats of distemper oil bound over primer coat complete all as specified and as directed by Engineer-in-Charge.

Material and labour preparing of new plastered surface of wall and applying wall care putty and applying two coats of distemper oil bound over primer coat complete all as specified and as directed by Engineer-in-Charge.

Material and labour preparing of new plastered surface of wall surface and applying exterior wall care putty and acrylic smooth exterior paint of required shade (Two coats over and including priming coat of exterior primer applied as per manufacturer's instructions) (including all necessary scaffolding, lifting arrangement upto 12 mtr height) complete all as specified and as directed.

Material and labour complete removal of existing treatment and preparation of ceiling and applying two coats of distemper oil bound over primer coat complete all as specified and as directed by Engineer-in-Charge.

Material and labour complete removal of existing treatment and preparation of surface and applying wall care putty on old surface of walls and applying two coats of distemper oil bound over primer coat complete all as specified and as directed by Engineer-in-Charge.

Material and labour complete removal of existing treatment on wall/ ceiling surface and applying exterior wall care putty and acrylic smooth exterior paint of required shade (Two coats over and including priming coat of exterior primer applied as per manufacturer's instructions) including exterior wall care putty (including all necessary scaffolding, lifting arrangement upto 12 mtr height) complete all as specified and as directed.

Material and labour preparation of old painted surface of wood and wood based materials of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.

Material and labour preparation of old painted surface of steel of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.

Material and labour plain cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete, RCC sunken portion as base layer for receiving top layer complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Glass fibre reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent) in Sunken treatment. Base coat : Berger HS Latex plus (or equivalent), Consumption base coat : 0.3 Kg/Sqm, Reinforcement : Glass fiber, Second and Third coat : Latex shield 2K (or equivalent), Consumption top coat : 3 Kg/Sqm, System requirements : density: 2.00 Kg/Ltr, Compressive strength : 0.5 N/Sqmm. (i) Wall penetration through the RCC slab must be sealed using Berger HS Repir (or equivalent). (ii) Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus (or equivalent) modified mortar with a bonding coat of Berger HS Latexplus (or equivalent) modified cement slurry upto 1.5 Mtr. (iii) All depressions, unevenness, surface honeycombing shall be repaired using Berger HS Latex plus (or equivalent) modified polymer mortar with a bonding coat of Berger HS latex plus (or equivalent) modified cement slurry, including cleaning of RCC surface to remove dust, loose particles, etc with compressed air or any other suitable technique depending on site conditions, grinding any sharp edges, etc complete all as specified and as directed.

Removing existing treatment from roof surfaces such as tiling, tarfelt, fungus, moss, dust etc., cleaning the surface of all foreign material by wire brushing and dusting and racking out RCC slab and removing the debris outside defence land complete all as specified and as directed.

Material and labour Cleaning of the exposed concrete slab and repairing the surface irregularities like cracks, potholes, as per manufacturer's method statement by Berger HS Rapairo (or equivalent) along with HS Latex Plus (or equivalent) and cement in mixing ratio of (1:4) where ever required complete all as specified and as directed.

Material and labour providing cement concrete (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) in roof padding, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Material and labour Home Shield PU Roofkoat (or equivalent) is a one component liquid, solvent free, cold applied, water-proofing membrane that is highly elastic and UV resistant with 10 years Warranty. ASTM D 6083-97a Waterproofing and heat reflecting system having following key performance properties. (i) UV resistant, prevent yellowing and weathering. (ii) Highly elastic upto 350% and crack bridging. (iii) Excellent adhesion on porous and non-porous substrates. (iv) Tensile Strength >10 N/Sqmm with GeoTextile fleece. (v) Solar Reflective Index (SRI) more than 109-111 ASTM E 1980-11. System : First coat : Providing and applying primer over the prepared surface with HS PU roofkoat Primer (or equivalent), Coverage : 0.2Kg/Sqm (with 50% dilution of water), Reinforcement: Geotextile 40 gsm, Second coat:Home shield roofkoat (or equivalent), Consumption: 0.5 Kg/Sqm, Third coat: HS PU roofkoat (or equivalent), Consumption : 0.8 Kg/Sqm. System buildup -1.5Kg/Sqm with geotextile of 40gsm complete all as specified and as directed.

Complete removal of vegetations, roots and shurbs from wall, ceiling, roof and adjacent to pipes etc and making good with PCC (1:2:4) or brick work and finishing the surface to match the existing surface including necessary scaffolding upto three storey building complete all as specified and as directed.

E/M Portion: - Taking down old unserviceable copper/ aluminium point wiring concealed/ batten (light, fan, socket or power) complete, including fixtures and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type of switch board wooden/ iron, round block etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Material and labour for point wiring for one light/ fan/ call bell point controlled by one 5 Amp switch with 1.5 Sqmm two single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn concealed PVC rigid/ 1.8mm wall thickness ISI marked including pressed steel modular metal flush boxes with suitable white cover plate with frame of any way i.e. (1 to 12 way as per site requirement) for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed. Notes: - (a) Wiring shall be done by using proper colour coding including making disturbed surface good. (b) Earth wire shall be of green colour. (c) On RCC roof/ ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engineer-in-Charge.

Description all as per Ser item No 141.00 here-in-before but 5 Amp socket outlet on same board complete all as specified and as directed.

Description all as per Ser item No 141.00 here-in-before but socket outlet 5 Amps independent board complete all as specified and as directed by Engineer-in-Charge.

Description all as per Ser item No 141.00 here-in-before but for one 6 pin socket outlet 15 Amps on independent board with cables 2.5 Sqmm size complete all as specified and as directed.

Supply and fixing modular switch 1 way 6 A, 1 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and as directed.

Material and labour in repairs for distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Material and labour in repairs for distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Material and labour in repairs for distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Supply and fixing in replacement of 5 to 32 Amp MCB 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement MCB 40 Amp 240 V, 10 KA 'B' curve in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement MCB SPN 32 Amp rating 240 V, 10 KA 'B' curve in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement MCB SPN 40 to 63 Amp rating 240 V, 10 KA 'B' curve in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement MCB TPN 40 to 125 Amp in the distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement of switch piano, flush type single pole one way 5 Amp, 240 volts complete all as specified and as directed.

Supply and fixing in replacement of switch piano, flush type single pole one way 15 Amps, 240 volts complete all as specified and as directed.

Supply and fixing in replacement of socket outlet 2 in 1, 3 pin, 5 A complete all as specified and as directed.

Supply and fixing in replacement of socket outlet 5 pin, 15 Amp, flush type, 240 Volts, 6 pin flush type complete all as specified and as directed.

Supply and fixing in replacement of switch socket outlet combined 5 pin 5 amp flush type, 240 volts complete all as specified and as directed.

Supply and fixing in replacement of switch socket outlet combined 2 in 1, 3 pin 5 amp and 15 amp flush type, 240 volts complete all as specified and as directed.

Supply and fixing in replacement for bell push, flush type single pole, 5 Amp, 240 volts complete all as specified and as directed.

Supply and fixing in replacement ceiling rose 3 terminal surface type complete all as specified and as directed.

Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Material and labour self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

Supply and fixing of LED lights fitting 1 x 20 W, 220 V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete (4' ft long) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and as directed.

Supply and fixing of LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing of bulk head luminaries IP-65 with opal diffuser 10 watt, 230 Volts LED type complete with 10 watt LED bulb complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing of call bell Ding Dong AC 230 Volts, single pole complete all as specified and as directed.

Material and labour in replacement sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqmm for phase and neutral and one run of 6.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/ neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and labour in replacement sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sqmm for phase and neutral and one run of 4.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/ neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and labour in replacement of copper cable for circuit with proper existing colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2.5 Sqmm for phase and neutral, drawn through the existing rigid PVC concealed conduit fixed on wall including taking down existing unserviceable wiring complete all as specified and as directed.

Material and labour in replacement of copper cable for circuit with proper existing colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 1.5 Sqmm for phase and neutral, drawn through the existing rigid PVC concealed conduit fixed on wall including taking down existing unserviceable wiring complete all as specified and as directed.

Supply and fixing in replacement of Vertical Distribution Board (TP&N) 4 way double door suitable for and including MCCB 125 Amp 16 KA four pole as incomer and outgoing MCB's and should be IP-43 protected with copper bus bars, neutral links, earthing bars complete all as specified and as directed including taking down old unserviceable distribution board/ MCB any type. Notes: - (i) Rate includes MCCB four pole 125 Amp, 16 KA, 415 Volts with adjustable thermal settings. (ii) MCB's shall be measured and paid separately. (iii) TPN DB and MCCB should be of same make.

M/S VED PAUL MAHAJAN (BID ID -3343147)

M/S Sukhmani Construction Co. (BID ID -3343006)

M/S PRITHIVI RAJ AND SONS (BID ID -3341292)

ASHFAQ AHMED MANHAS (BID ID -3343403)

M/S TRIKUTA BUILDERS (BID ID -3342099)