REPAIRS TO TOILETS FLOORING ALUMINIUM DOORS WINDOWS HAND RAILS INTERNAL ELECTRIFICATION OBD AND PAINTING AT AF STATION DEOLALI

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of cement concrete on ground floors nexc 15 cm thk above GL

M & L 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) as in flooring finished even and rough.

M & L for coloured joint free non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floors etc. set and and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) finished even and rough to receive the top layer.

M & L for coloured (light shade) vitrified ceramic tiles 10mm thick joint free (Square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tiles including 15mm screed bed or bedding layer CM 1 : 6 all as specified and directed by Engineer-in-Charge...

M & L for coloured (dark shade) vitrified ceramic tiles 10mm thick joint free (Square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors as in decorative purpose, border etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tiles including 15mm screed bed or bedding layer CM 1 : 6 all as specified and directed by Engineer-in-Charge..

M & L for coloured (light shade) vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in skirting/dados, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles including 10 mm thick rendering in CM 1:4 all as specified and directed by Engineer-in-Charge.

M & L for coloured Glazed ceramic tiles in vertical surface 300x 450x 7 mm/ 300X 600X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with pigment to match the colour of tiles over and including 15 mm thick rendering/bedding layer in CM 1:4 on brick work /stone masonary or concrete surfaces.

M&L for 75 mm thick sub base in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) all as specified.

M&L Chequered cement concrete tiles rubber moulded 30cm x 30cm x 25mm thick set, jointed and pointed in near cement slurry in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM 1:6

M & L for plain/reinforced cement concrete Type B-1, 1:2:4 (using 25 mm graded granite stone aggregate) cast in situ in copings, bed plates and the like including weathering, slightly rounded or chamfered angles & throating and including use of form work.

Demolition of Brick/Stone masonary built in cement mortar .

M & L brick work with fly ash brick straight or curved on plan exceeding 6 metres mean radius built in cement mortar 1:6

M & L brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified & diretced.

Taking down cement plaster on brick/stone walls/ concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc all as directed.

M & L for rendering 15 mm thick on stone masonry surfaces or other than fair faces of brick work of walls in cement mortar 1:4 finished even and smooth all as specified and directed.

M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth all as specified and directed.

M&L for rendering 5mm thick plaster on fair faces of brick work or concrete surfaces in CM 1:3 finished even and smooth on ceiling as specified and directed.

M & L for prepariation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of alkali resistant priming paints or JK wall Care Putty of 2mm thick suitable for external surfaces all as specified and directed by Engineer-in-Charge.

M & L for prepariation of newly plastered surfaces of walls and applying two coats of distemper after chalk whiting on plasterred surfaces or one coat of JK wall care putty of 2mm thick all as specified and directed by Engineer-in-Charge.

M & L for prepariation of newly plastered surface and applying three coats white wash in ceiling all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment of walls by steel wire brushing, prepariation of surfaces and applying two coats of distemper oil emulsion after chalk whiting or JK wall care putty 2mm thick over the walls all as specified and directed by Engineer-in-Charge.

M & L for prepariation of old surfaces of walls and applying one coat of oil emulsion distemper specified and directed by Engineer-in-Charge..

Complete removal of existing treatment of walls by steel wire brushing, prepariation and applying two coats of cement base paint over one coat of alkali resistant priming paints or JK wall Care Putty of 2mm thick suitable for external surfaces all as specified and directed by Engineer-in-Charge.

M & L for prepariation of old surfaces of walls and applying one coat of cement base paint all as specified and directed by Engineer-in-Charge..

Complete removal of existing treatment of ceiling by steel wire brushing, prepariation of surfaces and applying three coats of white wash on ceiling all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment by steel wire brushing and applying two coat of weather coat paint APEX over one coat of alkali resistant priming paints or JK wall Care Putty of 2mm thick suitable for external surface all as specified and directed by Engineer-in-Charge.

Dismantling of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar.

M&L Machine cut cudappah stone slab 20mm to 25 thick, over 15mm thick screed bed including cement slurry laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete necessary cutting, notching etc for sink.

M&L granite (of any type or any position) work ( table rubbed & polished), 18 to 20mm thick, in steps, jambs, pillars, window-cill, cooking platforms & like in cement mortar (1:4) including polishing of chamfered edges and pointing in white cement using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM (1:6) necessary cutting, notching etc for sink.

Chamfer, splays, or arris in facework of granite exc 15mm wide but nexc 50mm wide

Dismantling water storage tank 500 ltrs & n.exc. 1000 ltrs all as specified

M&L Rotational moulded polyethylene water storage tanks of 1000 ltr capacity (cylinderical verticla with closed top ) hoised and fixed in position all as specified in SSR part I

Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 20mm bore. complete all as specified and as directed

Refixing 20mm dia old steel water tubing and connecting in new or old position with S&F all fitting complete all as specified and as directed

M&L GI tubes medium grade 20mm bore fixed complete to wall or laid in floor. complete all as specified and as directed.

Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 15mm bore.

S & F GI tubing 15 mm bore medium grade with all fittings & fixed complete to walls or laid in floors.

Refixing 15mm dia old steel water tubing and connecting in new or old position with S&F all fitting complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick/stone wall all as specified and directged.

S & F in repairs ball brass valves with brass rod, high pressure with polythelene float and fly nut complete, screwed for iron pipe or for brass ferrule of 20mm dia.

S & F in repairs 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed.

S & F in repairs 15 mm bore fancy type chromium plated pillar taps cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S & F in repairs stop cocks 15 mm bore, chromium plated , fancy type screwed down , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions .

S & F in repairs wash hand basins, vitreous china( flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste coupling fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe as specified.

S & F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440 mm white with `P' or `S' trap, front or back inlet and integral foot rests including connection to trap, to flushing pipe etc. complete including PCC for making good to floor etc.

S & F in repairs 10 liters PVC valveless symphonic action type flushing cistern high/low level, white complete with inlet, ball valve, float and handle including brackets and telescopic down pipes and joint with WC complete.

S & F PVC connection 15 mm bore size with PTMT nuts and PVC washers of length 450 mm.

S & F in repairs urinal of size 345x355x535 mm,alongwith Water sprinckler (push type)and with fixing accessories (Make- Jaguar Model No. URS-WHT-13261) all as specified and directed.

S & F under counter top wash hand basins, white of size 450mm X 580 mm X116580mm (Make -Jaguar) or equivalent including waste coupling fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe as specified.

S & F in repairs single piece WC with PP seat cover , hinges, fixing accessories set, cistern fittings of size 655X365X 755 mm with P trap-180mm Make- Jaguar, or euivalent all as specified and directed by Engr-in-Charge.

S & F in repairs Bib cock (straight line model) with wall flange Make Jaguar or equivalent all as specified and directed by Engr-in-Charge.

S & F in repairs Angular stop cock with wall flange Make Jaguar, or euivalent all as specified and directed by Engr-in-Charge.

S & F exposed part kit of concealed stop cock with fitting sleeve, operating lever & adjustable wall flange with seal Make Jaguar, or equivalent all as specified and directed by Engr-in-Charge.

S & F paper holder with flap recessed type(stainless steel) (Make -Jaguar,)or equivalent all as specified and directed.

S & F soap dish recessed type(stainless steel) (Make -Jaguar, )or equivalent all as specified and directed.

S & F towel rack with lower hanger(stainless steel) (Make -Jaguar,)or equivalent all as specified and directed.

S & F 10-12mm thick frosted toughened glass door(logo of Air Force as specified and directed) with two nos of stainless steel handles for each shutter, 250mm long of decorative quality, floor spring of heavy duty in each shutter alongwith all fitting and fixtures and locking arrangements of approved make all as specified and directed by Engr-in-Charge.

S & F Steelness steel of superior quality (circular, rectangular or Square pipe) Railing designer type alongwith all fittings & fixtures all as specified and directed by Engr-in-Charge and approved by GE.

Removing and re-fixing of old serviceable electricals fittings of any description from wall, ceiling etc and fixing it in serviceable working condition after the completion of bldg works all as specified and directed by Engineer-in-Charge.

S & F PVC (SWR) floor trap of 100 mm outlet plain with grating including jointing with solvent cement.

S & F 40 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/ Sq. Cm., fixed complete to walls, ceilings or in floors etc.

Taking down eaves gutters and rainwater pipes (1ny size of pattern), including all fittings, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal to store all as specified and directed.

S & F PVC (SWR) pipes, single socketed, in any length, with rubber rings 110 mm dia as in floor/wall

S & F PVC (SWR) pipes, single socketed, in any length, with rubber rings 75 mm dia as in floor/wall

S & F PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement

S & F PVC (SWR) floor trap 100 mm bore plain with grating including jointing with solvent cement

S & F PVC (SWR) bends 110 mm dia with access door

S & F PVC (SWR) bends 75 mm dia with access door

S & F PVC (SWR) bends 110 mm dia

S & F PVC (SWR) bends 75 mm dia

S & F PVC (SWR) vent cowl 110 mm dia

S & F PVC (SWR) vent cowl 75 mm dia

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each.

All as per item No. 74 herein before but exc 1.5 sqm but not 4 Sqm each

S & F powder coated sections for doors and windows/ventilators/Partition walls etc including frames of size as approved and fixed all as specified and directed (Note : (i) Paneling such as glass , Gauge etc will be measured and paid saperately.(ii) The rate quoted under this item deemed included for necessary jointing cleates, glazing clips, alluminium beading, screws, rubber packing and locking devices & in built handles for sliding windows. However, no element on account of weight will be taken into consideration for these item.(iii) Floor door spring/locks/tower bolts/ handles/ door closure/hinges for doors measured saparately.(iv) Size of door / windows shall be all as directed at site.(v) Grills will be measured saparately.(vi) Second class hard wood batten of appropriate size to be inserted inside the frame for fixing hinges and the same is included in the rate quoted.)

S & F plain sheet glass 5 mm thick tinted, fixed to aluminium doors/ windows / ventilators complete all as directed by Engr-in-Charge (Note:- Beading/rubber packing is included in the rates for aluminium sections above.)

Ditto- all as per serial item No.77 above but frosted glass.

S&F in repair double action floor door stoper/spring hydroulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation bore, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty as in fixed including taking down and refixing aluminium shutter in the same opening.

S & F in repairs aluminium (die cast) body door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters of 700 mm in width & weight not more than 35 Kg.

S&F in repair Mortice lock brass 100 mm 4 lever vertical type fixed.

S & F 200 mm size aluminium powder coated barrel tower bolt of extruded section .

S&F factory made solid panel PVC door frame of size 50mmx47mm out of 5mm wood grain printed PVC sheet & edges will be printed to match with printed sheet reinforced with M.S. square tube, all as per specification and drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a laminate PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and single sides prelam PVC sheet and stile & rails having one side feathered edge and on other side 10mm (90°) bent edges & as gap insert for top rail & bottom rail; Panelling to be fitted in the M.S. frame welded/ sealed to the styles & rail with suitable PVC sheet beading, and joint together with solvent cement, all as specification and drawing.

S & F 125mm long Butt hinges, extruded aluminium powder coated with galvanished mild steel hinge pin anodisedand fixed type B-21

S & F 100mm long Butt hinges, steelness steel hinge pin anodisedand fixed type B-21

S & F 200 mm size aluminium anodised barrel tower bolt of extruded section .

S & F powder coated aluminum handle D type cast type 150mm size

S & F in repairs 140mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor.

Dismantling Structural steel work including doors, gates but excluding framed truss etc.

S & F rolled mild steel framed work as in HAND RAILS ,doors or gates of angle or other section confirming to Fe 410 - W, with gusset plates, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including eighter hooks and hinges or steel hnaging door fittings (exclussive of steel sheeting or other covering running rails and guides and hanging also fastening and fixing complete all as specified and directed by Engineer-in-Charge. and hanging and fixing complete.

S & F 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates, etc., cut to size, holes punched including rounded headed screws, clout nails or revets and fixed to wood or steel framing or fixing to MS clamps with necessary bolts and nuts with plain 40mm lap joints welded to frame as directed.

M & L for prepariation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M & L for prepariation of old or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified.

M & L for prepariation of old or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified.

Taking down carefully aluminium/copper point wiring (light,fan,socket power etc) on TW batten/PVC casing capping, surface steel/PVC conduit excluding all fitting/fixtures and making good disturbed surfaces of wall/floor/ceiling etc to match the adjoining surface all as specified and directed by Engr in Charge .

M&L for point wiring complete with two single core, PVC insulated, unsheathed, multi stranded bright annealed copper conductor cable, 1.5 Sq.mm 1100 Volts, FRLS grade drawn through and including heavy duty PVC casing and capping not less than 25 mm width and accessories surface mounted on walls, ceilings etc. on & including PVC box and plate for mounting switches, sockets, regulators etc and one run of 1.5 Sq.mm PVC insulated, unsheathed, multistranded, copper conductor cable FR grade as earth wire and connected to common earth dully complete for One light/fan point controlled by one switch

All as per item no-97 above but One 3 pin socket out let 5 Amps on same board.

All as per item no-97 above but One 3 pin socket out let 5 Amps on independent board.

All as per Sl item No 97 above but with two runs of 2.5 Sq.mm cable and one run of 1.5 Sq.mm cable as earth wire for one 3 pin socket outlet/power point 15 Amps controlled by one switch.

Supply and fixing in repair switch modular 6 Amps 230 Volts one way switch. Make Anchor Roma/Legrand Aretor/Crabtree

S&F in repair Switch modular type AC 230 volts 16/20 Amps one way complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree

S&F in repair Socket modular 6 Amps AC 230 Volts 2/3 pin combined 2 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree

S&F in repair Socket modular 6A/16 Amps-2/3 pin combined AC 230 Volts 2 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree

S&F in repairs Ceiling rose surface type, PVC/Polycarbonate isulated body size 50x28 mm two to three terminals.

M & L for Point wiring with 1.5 Sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed),PVC Casing caping or PVC concealed conduit 19mm dia, having wall thickness not less than 2 mm with sunk cast iron/pressed steel terminal boxes made out of 1.2mm thick sheet inclluding one coat red oxide primer on internal and external surface covered with 3mm thick hylam brand IS-2036 marked laminated sheet cover (for Mounting switches, sockets, regulators etc), including 1.5 Sqmm PVC insulated (multistrand) FRLS copper conductor continious earth wire for One light point or one fan point controlled by one switch SP 230 Volts Make of Wire : Havells/KEI /HPL

Description all as per Srl item No 9 above but forOne 3/5 pin 5 Amp socket outlet point controlled by one switch on independent bd. Make of Wire : Havells/KEI /HPL

Description all as per Srl item No 9 above but for One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board. Make of Wire : Havells/KEI /HPL

Description all as per item No 9 above but using 2.5 sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed) for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed. Make of Wire : Havells/KEI /HPL

S & F LED light fitting fixture 20W, decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly energy efficient ready to use complete all as specified. Make-Havells(LHEXBXPNIN1WO20)/Wipro(LL20-221-XXX-65-NE)/HPL(HLPT51820PCGCW)/Philips (BN021CLED20SPSUCDLGR)

S & F Lamp holder insulated body PVC/polycarbonate with back plate suitable for batten fitting complete all as specified and directed. Make Anchor/Cona/Standard

S&F Switch piano, flush type single pole, one way 5 Amp all as specified and directed by Engr-in-Charge. Make HPL/Cona/SSK

S&F Switch piano, flush type single pole, one way 15 Amp all as specified and directed by Engr-in-Charge. Make HPL/Cona/SSK

S&F Socket outlet 2 in 1, 3 pin 5A complete all as specified and directed by Engr-in-Charge. Make HPL/Cona/SSK

S&F Socket outlet 2 in 1, 3 pin 5A and 15 amp flush type complete all as specified and directed by Engr-in-Charge. Make HPL/Cona/SSK

S & F LED 10 W (candle /ball type) with B-22 base, complete all as specified and directed. Make -Havells/Philips/Halonix

S&F 10 Watt 6000K LED Bulk head luminaries with opal diffuser, etc complete with accessories all as specified and directed.Make - HPL (HLPLEDBH10W(CW))/ Havells/HPL/CG)

M&L for 10 Sqmm 1100 volts grade heavy duty PVC insulated multistranded aluminium conductor and overall PVC sheathed in service connection suspended by insulated hangers not more than 1m apart incl 4mm suspension GI wire one twin core cable flate porcelain insulators etc Make: Paragon/PLAZA/Havells/KEI/HPL

Disconnect and insulate electric supply wire and taking down carefully / exhaust/cabim wall fan of any make and sweep dismantlling blades, and servicing , check for minor repairs required including replacement of flexible PVC insulated copper conducor of size 0.75 sqm and rubber bushesh

Hanging only exhaust fans of any make and sweep connecting the complete with & including provision of copper conductor cord 3 core PVC insulated and sheathed from ceiling rose to fan connector and testing as all as specified and as diected by Engr in charge.( Note: The fan shall be fitted with new set of clamps, rubber shackle split pins and top and bottom nut bolts etc.)

Supply & fix in repair ventilating fan made out of high quality engineering plastic, resistant to colour change with anti static properties, 250mm sweep suitable to work on 230 Volts 50 Hz AC supply of Havells or equivalent of CG/Bajaj including connecting to ceiling rose all as required or directed.

Supply & fix in repair ventilating fan made out of high quality engineering plastic, resistant to colour change with anti static properties, 300mm sweep suitable to work on 230 Volts 50 Hz AC supply of Havells or equivalent of CG/Bajaj including connecting to ceiling rose all as required or directed.

S & F in repairs and connecting up LED light fittings 1x9/10 watt 2 feet long complete with LED rode 9/10 watt, spring loaded rotary holder, connector etc. complete and connecting up with and including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Crompton fitting DMLN1LT8-8, 1X9/10W and LED rode LT8-8-865-2 or equivalent in Philips/Bajaj/Havells/Wipro ).

S & F in repairs and connecting up LED light fittings 1x18/20 watt 4 feet long complete with LED rode 18/20 watt, spring loaded rotary holder, connector etc. complete and connecting up with and including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Crompton fitting DMLN1LT8-16, 1X18/20W and LED rode LT8-20-865-2 or equivalent in Philips/Bajaj/Havells/Wipro ).

S&F in repairs Sub main wiring with PVC insulated un armoured heavy duty copper conductor 1100 Volts FR grade 2 single core 6 Sq.mm cable and one run of 4 Sqmm copper earth wire for continuous earth fixed on wall/ceiling/floor etc. drawn in PVC casing capping / PVC non metallic conduit complete all as directed.

S&F in repairs Sub main wiring with PVC insulated un armoured heavy duty copper conductor 1100 Volts FR grade 2 single core 4 Sq.mm cable and one run of 2.5 Sqmm copper earth wire for continuous earth fixed on wall/ceiling/floor etc. drawn in PVC casing capping / PVC non metallic conduit complete all as directed.

Sheet metal enclosure for DB’s with bus bar , MCB SPN 8 way ,240 volts double door with detachable gland plate.

Sheet metal enclosure for DB’s with bus bar ,MCB SPN 4 way ,240 volts double door with detachable gland plate.

M & L for MCB SP 5 to 30 Amps 240 volts. B seires 10 KA

M & L for MCB SPN 40 to 63 Amps 240 volts. B seires 10 KA

Material and labour for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galavanised iron and earth strip protected by provision of GI light grade pipe 20mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion.

Supply and fixing 60 watts LED building security light fitting including suitable bracket and nut bolts etc all as specified and directed by engr in charge

Disconnect and insulate electric supply wire and taking down carefully geyser of any capacity and make and keep on store all as specified and directed .

Fixing only geyser of any make and capacity connecting the complete with & including provision of and testing as all as specified and as diected by Engr in charge.( Note: Thegeyser shall be fitted with new geyser bolts if required, all as specified and directe by Engr in charge.

SIDDHIVINAYAK ENTERPRISES

Vinod Enterprises

M/S KANNANS

SHREE SAMARTH SERVICES

M/S ANAND G NUNSE

M/s Lakhanpal construction company