8823/2021-22/E8

Amount

Material and labour factory made sheet metal enclosure dust and vermin proof made out of 2.00mm thick Ms sheet of size 90x60x20 cm depth with double door hinged shutter and locking arrangement for fixing DBs, KWH meter etc flushed/semi flushed /grouting on wall as per site requirement including DIN rail channel mount MSB,s SP/SPN in 3 rows and provide TPN aluminium bus bar channel of rating 200 Amps duly mounted on 'F' class insulator with colour coded heat shjrinkable sleeves and powder coated paint after prepration of surfaces with suitable glass vision panel complete all as directed (Note: Unit rate shall be inclusive of making good the area not exceeding 0.6 sqm and not exceeding 0.125m depth for filling the hollow existing surface with half bricks in CM (1:4) all as specified and directed by Engr-in-charge.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600x600x6.00mm thick burried directly in ground any type of soil including rocky soil also(earth pit not less than 2.25 Mtrs below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to GI earth lead wire of 4.0 mm dia by means of bolts, nuts, check nuts, as earth lead complete including 40 mm bore dia protection pipe GI medium grade upto 7.5m length, watering pipe 15mm bore dia GI medium grade 1.70m length, charcoal & salt filling, necessary earth work, concrete pit, funnel removal of surplus soil upto 50m distance all as per electrical plate No.3 of SSR Part I and connected to earthing test point, main board including testing on completion all as specified and directed.

Earthing complete with copper earth plate electrode of size 600 x 600 x 3.00 mm ,buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to copper strip of size 20 x 3 mm as earth lead by means of bolts ,nuts ,check nuts of galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate no 3 of SSR Part 1, 20 mm dia watering pipe medium grade 1.70 mtr long, including necessary pit with cover including testing on completion including dismantling old unserviceable earthing complete all as specified and directed by Engr in Charge

Earthing complete with galvanized GI earth plate electrode of size 600 x 600 x 6.00 mm ,buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized iron strip of size 25 x 4 mm as earth lead by means of bolts ,nuts ,check nuts of galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate no 3 of SSR Part 1, 20 mm dia watering pipe medium grade 1.70 mtr long, including necessary pit with cover, funnel including testing on completion including dismantling old unserviceable earthing complete all as specified and directed by Engr in Charge

Dismantling of old aluminium/copper strip of any size, complete all as specified and directed.

S&F in replacement Aluminium strip 25x3 mm thick fixed with saddles and fixing screws etc with minimum two number saddles with screws on and including PVC gutties in each one mtr of length for roof conductors and down conductors above ground, complete all as specified and directed.

All as per Sr item no 6 here in before except for Aluminium Strip 25X3 mm

S&F in replacement Copper strip 20x3 mm thick fixed with saddles and fixing screw etc with minimum two number saddles with screws on and including PVC gutties in one mtr of length for roof conductors and down conductors above ground, complete all as specified and directed.

All as per Sr item no 8 here in before except for Copper Strip 20X3 mm

S&F in replacement Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed by Engr in charge

S&F in replacement Air termination single pointed aluminium rod 12 mm dia 300 mm long fixed including taking out old air termination rod complete all as specified and directed

S&F in replacement Air termination single pointed copper rod 12 mm dia 300 mm long fixed with copper strip and taking out old air termination rod, complete all as specified and directed.

S & F in replacement (including taking down old fitting) LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. CAT NO. NUSNEOHE2X2R36WLED840PIRSENSOR of Make : Havells/ Bajaj/ Crompton/ Phlilips all as specified and directed.

S & F in replacement (including taking down old fitting) Energy efficient LED ceiling light 15W of size 1X1 feet complete with all accessories & fixtures CAT NO. PLUTO1X1PLR15WLED840S of Make : Havells/ Bajaj/ Crompton/ Phlilips all as specified and directed.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as approved by Engineer-in-Charge including making electrical connection and taking down existing old conventional lanterns

Disconnecting and taking down of Geysers (water heater) of capacity 25/ 50 Ltrs horizontal/vertical of any make/model from existing position and dismentling of parts i.e.bottom plate, Top cover, water assembly thermostate, heating elements, inner tank ,glass wool,Pressure release valve, inlet and outlet valves etc.complete and reassembling and refixing in same position after descaling desludging and cleaning with suitable chemicals and materials and washing with fresh water and repair and replacment of defective/unserviceable components complete all as spaciifed and directed. Note: The rate quoted shall include the minors repairs and replacment of minor parts i.e. screw nuts, bolts washers and patch work etc .However the major components incorporated herein after shall be paid under respective items.

S&F in replacement of thermowool for air tightening as per qty required in Geysers of 50 Ltrs capacity complete all as specified and as directed.

S&F in replacement of thermowool for air tightening as per qty required in Geysers of 25 Ltrs capacity complete all as specified and as directed.

S&F in replacement of water syphon assembly with rubber gaskit tin coated suitable for 50 Ltrs Geysers all as per exisiting shape and size complete all as specified and directed

S&F in replacement of water syphon assembly with rubber gaskit tin coated suitable for 25 Ltrs Geysers all as per exisiting shape and size complete all as specified and directed

S&F in replacement of inner stainless steel container thick dully shaped and welded for 50 Ltrs Geysers complete all as specified and directed.

S&F in replacement of inner stainless steel container thick dully shaped and welded for 25 Ltrs Geysers complete all as specified and directed.

M&L for outer cover of MS sheet not less than 1.2mm thick shaped and welded dully sprey painted all as per existing geyser 50 Ltr capacity .

M&L for outer cover of MS sheet not less than 1.2mm thick shaped and welded dully sprey painted all as per existing geyser 25 Ltr capacity .

S&F in replacement of indicators red/green colour as per existing size and type complete all as specified and as directed.

S&F in replacement of Heating Element 1.5 KW 240V 50Hz ISI mark complete all as specified and as directed.Make;Venus/Pearl/CG/Bajaj

S&F in replacement of PVC connection with brass connector duly threaded internally on both ends of size 18”(45Cm) long complete all as specified and as directed.

S&F in replacement of thermostat 0 to 100 C temperature of water heater for 25/50 Ltr Capacity complete all as spacified and directed.

M&L for pressure release valve for 50/25 Ltr, geysers complete all as specified and as directed

Painting to Geyser with two coat of synthetic enamel white paint with spray gun paint complete all as specified and as directed.

M&L for re-winding with super enamelled copper winding wire of existing gauge of main transformer of 180 volts to 240 volts AC single phase for voltage stabilizer of the following capacity:- (a) 10/5 KVA

M&L for re-winding with super enamelled copper winding wire of existing gauge of main transformer of 180 volts to 240 volts AC single phase for voltage stabilizer of the following capacity:- (a) 1/0.5 KVA

Supply & Fixing in repair printed circuit board and cut off circuit 12 volts 5 Amps ,voltmeter,LED indicator type for 0.5/1 KVA stabilizer complete all as specified and directed

Overhauling of ceiling fan/exhaust fan of any make , model and size 1200/300/450 mm complete after disconnecting it and cleaning all parts of fan internally and externally and applying greasing, oiling of bushes and bearings including replacement of all worn out parts such as bush, bearing, burnt out winding , split pin, rubber reel, nuts and bolts,mild steel ‘U’ clamp fan condenser, plastic canopy, blade, outer cover, rotor and replacement of 23/0.0076 copper flexible cord twin core of suitable length not exceeding 1 meter length from ceiling rose to ceiling fan including spray painting of ceiling/exhaust fan with one coats of white synthetic enamel paint including preparation of old painted surfaces, filling of all cavities etc with filler and re-writing fan number with black synthetic enamel paint including re-assembling all repair parts of fan and testing it ( not less than 8 hours continous run ) for smooth functioning and refixing the fan in its original position of any other location where directed complete all as specified. Note:-Defective parts shall be measured and paid separately

Supply and fix in repair ball bearing of suitable size for following items all as specified and directed. Make :- SKF /NBC (a) Exhaust fan 150 mm to 450 mm sweep

Supply and replace Gun metal bush of suitable size for fan /exhaust fan /air circulator /cabin/wall fan of any make, any model and any sweep complete all as specified and as directed.

Supply and fix in repair wall frame with nut bolts, washers suitable for exhaust fans of size 150 to 450mm including cuttung ,chasing and mounting bolt in wall and making good disturbed surface as required complete all as required and specified and as directed.

Supply and replace condenser 2.5/3.15/ 4 Mfd for fan of any make, any model , type and any sweep 240 volts complete all as specified and as directed.

Supply and replace set of blade (white colour)for 150 to 400 mm sweep exhaust fans including frame, nut bolts and washers suitable for any make complete all as specified and directed.

Supply and replace PVC Frame (white colour)for 150 to 200 mm sweep exhaust fans including flipping shutter of PVC , nut bolts and washers suitable for any make complete all as specified and directed.

M&L in repair rotor/stator complete with copper winding suitable for 1200 mm sweep ceiling fan complete all as directed.

M&L in repair rotor/stator complete with copper winding for rotor of 150 to 450 mm exaust fan.

Supply and fixing in repair of the following spare parts for repalcement of the unserviceable items:-

(a) PTC relay OLP HE 48/115 Make : Whirlpool / Classic/ Godrej

(b) Door handle and lock arrangement with key suitable for 165 / 175 / 285 / 300 / 315 ltrs capacacity refrigerators

(c) Overload protector for refrigerator 1/6 to 1/8 HP ( Make : Whirlpool / Classic/cubing)

(D) Rubber door beeding gasket set suitable for 165 / 180 / 300 / 310 ltrs refrigerators

(e) Thermostat for refrigerator (Make : Ranutrol / Indfoss)

(f) Bulb for refrigerator , 15 Watt 220 volt, pin type Make : Bajaj / Omex/Philips

(g) Gas drier filter for refrigerator make : Apurna / Whirlpool/Godrej

(h) Ice tray (PVC superior quality)

(j) Relay open type for refrigerator 1/6 HP (Make : Ranutrol / Classic)

(k) PVC/metallic tray door side any type for refrigerator of cap 165 to 310 ltr.

(l) PVC/Rubber/metallic base gutti/roller with nut bolts and washer as required suitable for fixed on base of refrigerator of cap 165 to 310 ltr any type.

(m) PVC/metallic tray bucket type with lid cover for refrigerator of cap 165 to 310 ltr.

S&F in repair freezer door assembly complete with door spring for 165/180 / 300 / 310ltrs refrigerator of approved pattern complete all as specified and as directed. Make : Godrej / Whirlpool/ Kelvinator/LG/Voltas

M&L for Gas charging R-134a up to required quantity to refrigerator of any make, model and capacity of 165 ltrs,180 ltrs, 300 ltrs & 310 ltrs including flusing of gas,oil charging, checking of leakage and rectification of the same etc. including replacement of necessary capillary tubes well welding and testing on full load all as specified and as directed.

Supply & Fixing in repair compressor unit complete for 165/180/ 300 / 310 ltrs refrigerator Make : Whirlpool / Godrej /LG/Kelvinator

S&F in repair ice chamber (Freezer) for 165 / 180 / 300 / 310 ltrs refrigerator surrounded by freezer pipes complete all as specified and as directed Make : Whirlpool / Kelvinator / Godrej /LG

Supply & Fixing in repair condensor coil for 165/180/ 300 / 310 ltrs godrej refrigerator (Cold gold model) Make : Whirlpool / Godrej /LG/Kelvinator

M&L for writing SM No., MES No. etc, on refrigerator, AC & at site with approved shade/color of synthetic enamel paint, height of letter 40 mm and up to 13 Nos in words/Figures complete all as specified and directed.

S & F in repair (including taking down old fitting) Energy efficient LED acrylic edge light board written as ''entry/exit'' prewired and internal illuminated with Res/Green Light complete with all accessories & fixtures Make : Addissol/ Bajaj/ Crompton/ Phlilips all as specified and directed.

M/s. Rishav Sood

KEWAL SONS