COMPREHENSIVE REPAIR MAINT INTERNAL FITTING AND FIXTURES CEILING LED LIGHTS CEILING FANS GEYSERS EXHAUST FANS WALL MOUNTED FANS DESERT COOLERS AND CONNECTED ITEMS AT AVN TANDA AREA UNDER GE N AKHNOOR

Amount

M&L for taking down of ceiling fan of size 1200/1400mm for safety checking by replacing defective parts/painting/rewinding and re-fixing the ceiling fan after repairs,all as specified and as directed by Engr-in-charge. (Note:- The replacement of unserviceable items like capacitor, Bearings, Bush, Canopy, down rod etc.shall be made as directed by the Engineer-in-Charge which will be measured and paid separately under respective items as Supply only. However, parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional and making connection by replacing PVC insulated unsheathed cable of copper conduct of size 1.5 Sqmm from ceiling rose/ connector fan (minimum 0.50 Mtr length) including cost of labour for above replacement are deemed to be inclusive in quoted rate all as directed.

Note for item No 1: The following items shall be deemed to be inclusive in the unit rate quoted against Sl Item No 1:- (a) In each job, checking the functioning of fan including its connections, cleaning of fan, greasing of fan and mechanical check i.e. tightening of loose screw, nuts, bolts, etc are inclusive in unit quoted rate. (b) Replacement of unserviceable parts like rubber bush, clamps, bolts, nuts, washers, safety pin, bearing etc will be paid under respective item here-in-after as supply only through proper documentation. (c) The entire job will be carried out in Akhnoor station and necessary documents showing qtr No, bldg No supported with user signature shall be prepared as per format directed by Engr-in-charge and will be deposited to concerned JE (E/M) within 24 hrs. (d) Maitenance of documents ie complaint slip/complaint register & other stationery required shall be of contractor's responsibility. (e) Necessary T&P such as ladder, required manpower for taking down and refixing after repair shall be of contractor's responsibility. (f) All types of T&P, PVC insulation tape, minor nuts, bolts, washers etc required for maintaining the services shall be provided by contractor without any cost to the department. (g) Any fan found defective/not working shall be brought to AGE E/M store yard & re-fixed after repairing.

Note for item No 1 (Contd): Inclusive in the unit rate quoted against Sl Item No 1:- (h) In case of major defects, entire job shall be completed within 10 days from the date of registration of complaint, failing which penalty charges @100/- per day shall be recovered. (j) In case of minor defects, entire job shall be completed within12 hrs from the time of registration of complaint, failing which penalty charges @ 50/- per job shall be recovered. (k) The contractor shall maintain a record of all urgent/ routine works and if the work is repeated due to poor workmanship, he will be liable to repair the same without any extra expenditure to the Govt.

Supply only rotor of ceiling fan of any size

Supply only fan canopies for ceiling fan size of 1200mm/1400mm

Supply only gun metal bush of suitable size for ceiling fan 1200mm /1400 mm sweep

Supply only fan bearing suitable for ceiling fan 1200mm /1400 mm sweep (bearing with 8 balls shall be used ) Make:- NBC/TATA/SKF

Supply only down rod for ceiling fan with 15mm dia (of length not less than 45cm and not more than 60cm) with hanging clamps for ceiling fan complete all as specified and directed.

Supply only Rubber reel bushes for ceiling fan of size 1200/1400mm

Supply only 'U' clamp for hanging ceiling fan with all nuts, bolts and washers.

Supply only outer body of ceiling fan of any size

Supply only blades (made of aluminum) suitable for 1400mm sweep ceiling fan of any make with set of screws complete all as specified and directed.

Supply only safety pins 40mm to 50mm long with nuts and bolt with washers for ceiling fan of size 1200/1400mm

Supply only steel screw (for fixing of fan blade) as per site requirement for any make of ceiling fan complete all as specified and directed.

Supply only blades (made of aluminum) suitable for 1200mm sweep ceiling fan of any make with set of screws complete all as specified and directed .

Supply only down rod for ceiling fan with 15mm dia (of length not less than 90cm and not more than 120cm) with hanging clamps for ceiling fan complete all as specified and directed.

Supply only down rod for ceiling fan with 15mm dia (of length not less than 180cm and not more than 210cm) with hanging clamps for ceiling fan complete all as specified and directed.

M&L painting the ceiling fan 1200mm /1400 mm sweep with one coat of syntetic enamel paint as per existing colour and writing the MES No- as directed by Engr in Charge.(taking down of fan,and re hanging shall be measured under item No. 1. Note:- Painting of ceiling fan shall be done inside MES complex only.

Material and labour for winding of ceiling fan motor 1200 mm sweep of any make with super enameled copper winding wire of existing gauge (wt of copper winding wire per fan 350 to 500 gms) including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with twin core copper flexible wire of size 0.0076mm of length not more than one meter with each fan complete all as specified and directed. Note :- (i) Motor shall be winded with machine inside MES complex only. (ii) Old burnt wire shall be contractor’s property and necessary credit shall be recovered as per credit shedule. (iii)taking down of fan,and re hanging measured under item No. 1 seperately.

Material and labour for winding of ceiling fan motor 1400 mm sweep of any make with super enameled copper winding wire of existing gauge (wt of copper winding wire per fan 350 to 500 gms) including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with twin core copper flexible wire of size 0.0076mm of length not more than one meter with each fan complete all as specified and directed. Note :- (i) Motor shall be winded with machine inside MES complex only. (ii) Old burnt wire shall be contractor’s property and necessary credit shall be recovered as per credit shedule. (iii)taking down of fan,and re hanging measured under item No. 1 seperately.

Supply and fixing in replacement of unserviceable energy efficeint Ceiling fan 1200 mm sweep, energy efficient ISI mark with 5 star rating(BLDC) 230 Volts AC 50 Hz, single phase including provision of fixing arrangement, nut and bolt and flexible 3 core of size 1.5 sqmm not less than 0.5 m long complete including taking down existing one, writing MES No with synthetic enamel paint all as specified and as directed. Make : Havells cat Part No. ES Neo or equivalent in Bajaj/ Orient./Halonix Note:- (a) The contractor shall given a written guarantee of minimum two years after completion of work. (b) Old Unserviceable ceiling fan shall be deposited to MES store yard.

Material and labour for winding of Exhuast fan 450 mm sweep of any make with super enameled copper winding wire of existing gauge (wt of copper winding wire per fan 250 to 500 gms) including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with twin core copper flexible wire of size 0.0076mm of length not more than one meter with each fan complete all as specified and directed. Note :- (i) Motor shall be wound with machine inside MES complex only. (ii) Old burnt wire shall be contractor’s property and necessary credit shall be recovered as per credit shedule.

Description all as per Sl item No 20 here in above but 300 mm sweep

Description all as per Sl item No 20 here in above but 230 mm sweep

Supply only fan bush of suitable size for exhaust fan of the any sweep

Supply only 4 mfd capacity ceiling /exhaust fan condensors. Make:- Asian/ Tyton/ CG/ Usha

Supply only metal louvers of suitable size for exhaust fan of the 450mm sweep

Supply only fan bearing of suitable size for exhaust fan of 450mm sweep including greasing.

Supply only 3.15 mfd capacity ceiling /exhaust fan condensors. Make:- Asian/ Tyton/ CG/ Usha

Supply only metal louvers of suitable size for exhaust fan of the 300mm sweep

Supply only fan bearing of suitable size for exhaust fan of 300mm sweep including greasing.

Supply only 2.5 mfd capacity ceiling /exhaust fan condensors. Make:- Asian/ Tyton/ CG/ Usha

Supply only metal louvers of suitable size for exhaust fan of the 230mm sweep

M&L painting the exhaust fan of 450mm sweep with one coat of syntetic enamel paint as exiting colour and writing the MES No and return to MES storeyard /user unit from the work shop .as directed by Engr in Charge. Note:- Painting of Exaust fan shall be done inside MES complex only.

All as per item No 32 above but 300 mm sweep

All as per item No 32 above but 230 mm sweep

S&F Domestic Exhaust Fans for kitchen, 300 mm sweep, 230 volt suqare type, heavy duty, 1400 RPM, corrosion less mild steel body of motor, plastic/ fibre blade for noise less operation, self operating louvers gives powerful performance round the clock, including necessary cutting, making holes on stone/brick walls where required, fixing arrangement with MS pipe 350 mm dia of required length for protect deshape of stone masonery, suitable hold fast with necessary nut, bolts / screws including taking down existing one writing MES No with synthetic enamel paint all specified and directed. Make- havells model-Ventil Air-DB or equivalent in bajaj, Almonard. Note:- Old Unserviceable domestic exhaust fan shall be deposited to MES store yard.

S&F Domestic Exhaust Fans for kitchen, 450 mm sweep, 230 volt suqare type, heavy duty, 1400 RPM, corrosion less mild steel body of motor, plastic/ fibre blade for noise less operation, self operating louvers gives powerful performance round the clock, including necessary cutting, making holes on stone/brick walls where required, fixing arrangement with MS pipe 350 mm dia of required length for protect deshape of stone masonery, suitable hold fast with necessary nut, bolts / screws including taking down existing one writing MES No with synthetic enamel paint all specified and directed. Make- havells model-Ventil Air-DB or equivalent in bajaj, Almonard. Note:- Old Unserviceable domestic exhaust fan shall be deposited to MES store yard.

S&F Exhaust fan 200 mm sweep 230 volt square type, heavy duty with louvers of PVC body including necessary nut, bolts / screws including taking down existing one writing MES No with synthetic enamel paint all specified and directed. Make-Havells Cat No Ventil DX-WH/BLK or equivalent in bajaj, Crompton Greaves etc. Note:- Old Unserviceable Exhaust fan shall be deposited to MES store yard.

Supply and fixing in replacement sub main wiring with PVC insulated unsheathed FRLS 1100 volts grade multi stranded copper conductor cable 2 runs of 4 sqmm drawn through in and incl suitable size PVC conduit and all accessories fixed to wall/floors/concealed along with 1 runs of 2.5 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring all as directed. Make of Casing capping -Poly Cab/Modi/ Presto Plast Make of Cable : Plaza/Polycab/Havells Note: 2 runs of 4 sqmm cable along with one run of 2.5 sqmm cable for earth conductor alongwith suitable size PVC casing capping/Pipe shall be measured as one length.

Sub main wiring with PVC insulated unsheathed FRLS 1100 volts grade multi stranded copper conductor cable 2 runs of 6 sqmm drawn through in and incl suitable size PVC conduit and all accessories fixed to wall/floors/concealed along with 1 runs of 4 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring all as directed. Make of Casing capping -Poly Cab/Modi/ Presto Plast Make of Cable : Plaza/Polycab/Havells Note: 2 runs of 4 sqmm cable along with one run of 4 sqmm cable for earth conductor alongwith suitable size PVC casing capping/Pipe shall be measured as one length.

Taking down and dismantling geyser of any make and cap 25/50 ltrs & taking out water inlet outlet assly, removing glass wool and taking out the inner tank, descaling the assembly and tank , detecting the leakage, welding / brazing the defected part , repacking the glass wool and refixing the same after making it funcional including replacement of worn out nuts bolts washer etc complete all as specified and directed. Note: Cost of material and labour for providing new items shall be measured under relevant items of sch A.

Supply only water inlet and outlet assembly of any make as required at site with rubber gasket suitable for geyser of 25 ltrs capacity electric driven water storage heater with provn of housing for thermostat assembly, heating element fixing arrangement nuts bolts and washers etc. complete all as specified and directed .

Supply only water inlet and outlet assembly of any make as required at site with rubber gasket suitable for geyser of 50 ltrs capacity electric driven water storage heater with provn of housing for thermostat assembly, heating element fixing arrangement nuts bolts and washers etc. complete all as specified and directed .

Supply only thermostat switch for electric water heater storage type of cap 25/ 50 ltr, 230 volts of any make of geyser.

Supply only heating element with triangular base ISI marked, single phase, 230 volt, cap 1.5 KW. All as specified and directed.

Supply only heating element with round base suitable for Bajaj geyser having electronic cutout plate ,ISI marked single phase, 230 volt, capacity 1.5 KW all as specified and directed.

Supply only heating element with triangular base ISI marked, single phase, 230 volt, cap 2 KW all as specified and directed.

Supply only heating element with round base ISI marked, single phase, 230 volt, cap 2 KW all as specified and directed..

Supply only pressure release valve conforming to relevant IS 15mm bore suitable for fixing with GI pipe/tubing 15mm bore complete all as specified and directed.

Supply only heavy duty PVC connection nylon threaded 450mm large (18”) 15mm bore including brass nuts, rubber washers complete on both ends.

Supply only indicator lamps round/rectangular type 230 volt AC suitable for geyser of any capacity including providing electric connections complete all as specified & directed.

Supply only water storage inner tank of SS material for 25 ltrs capacity geyser, with provn for fixing 15mm dia galvanized air release valve all as specified and directed.

Supply only water storage inner tank of SS material for 50 ltrs capacity geyser, with provn for fixing 15mm dia galvanized air release valve all as specified and directed.

Supply & fixing in replacement MCB SPN 20 Amps 240 volts , rupturing cap 10 KA, 'C' series all as specified and directed.

Supply & fixing in replacement MCB DB 2 way complete with fixing accessories all as specified and directed. Make Havells,Indoasian, Schnieder.

Supply & fixing in replacement thermal cut out Bimetallic disc type with snap action switch, with operation temperautre below the boiling point i.e. 90+ 6˚C with manual reset knob for Geyser.

Supply and fixing in replacement plug top 15 Amps 3 pins all as specified and directed. Make Havells REO, Schnieder, Indiasian

Material and labour for painting of geyser of cap 25/ 50 ltr complete with superior quality synthetic enamel white paint by spray painting after scraping old paint and making surface clean all as specified and directed. Note: contractor has make an arrangement for spray painting within premises of Garrison as directed and specified by Engr -in-charge and rate quoted deemed to include to remove, transport Geysers from bldgs to specified location for cleaning and painting and reconnected at same place after doing needful

Supply and fixing in replacement electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece incl making holes on walls for proper fixing with nuts and bolts complete making the surface good as per existing all as specified and directed. Make Godrej/Havells(Monza EC),or equivalent Note:- Old Unserviceable geysers shall be deposited to MES store yard.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked, conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knock out for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators, red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed (Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- Make of Cables Havells, KEI, Anchor (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers and all modular electrical fixtures are to be used of same make/brand only and shall be deemed in to included in quoted rate only.)

All as per Item No 60 above but One light point/fan /bell point controlled by one switch.

All as per Item No 60 above but One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

All as per Item No 60 above but One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

Material and labour for point wiring complete with 2.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top, bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 2.5 Sqmm PVC insulated multistranded FRLS type unsheathed (Green colour), single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- Make of Cables Havells, KEI, Anchor (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers and all modular electrical fixtures are to be used of same make/brand only and shall be deemed in to included in quoted rate only.)

All as per Item No 61 above but One 15 amps power socket outlet point controlled by one 16 amps switch on independent board.

Supply & fixing modular type switch 6 Amps, single pole, 1way,1 module,240V, ISI Marked complete all as specified and directed. Make : Indoasian Glint,Crabtree, Anchor

Supply & fixing modular type switch 16 Amps, single pole,1 way,1 module,240V, ISI Marked Complete all as specified and directed. Make Indoasian Glint,Crabtree, Anchor

Supply & fixing modular type socket shuttered type 6 Amps- 2/3 Pin combined 2 module,240V,AC ISI Marked Complete all as specified and directed. Make : Indoasian Glint,Crabtree, Anchor

Supply & fixing modular type socket 6 A/16 Amps -2/3 Pin combined shuttered socket 2 module 240V AC ISI Marked Complete all as specified and directed Make : Indoasian Glint,Crabtree, Anchor

Supply & fix fan regulator modular type electronic, stepped type 100 Watts, 2 module 240Volts,AC ISI marked complete all as specified and directed. Make : Indoasian Glint,Crabtree, Anchor

Supply and fixing VTPN verticle loadline double door distribution box (DB) are fitted with Bus bar neutral link, blanking plates of 4 way with suitable for incomming MCCB 'I/C' frame,having isolated neutral bar, mechanical impact strength IK09,door earthing suitable for MCCB upto 125 Amp Make -Indoasian part No- 811888 or its equivalent in Havells ,Legrand, L & T etc.

Supply and fixing sheet metal enclosure double door type for DBs single pole and neutral 12 way 240 V with 200 Amp bus bar including blanking plates where required . Make : Indoasian, Legrand, Schiender, Havells etc.

Supply and fixing sheet metal enclosure double door type for DBs single pole and neutral 8 way 240 V with 200 Amp bus bar including blanking plates where required . Make : Indoasian, Legrand, Schiender, Havells etc.

Supply and fix MCCB TPN 415 volts 16 KA, 63 Amp suitable for TPN vertical loadline DB all as specified. Make : Indoasian, Legrand, Schiender, Havells etc.

M & L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade,FRLS type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 2.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface including cutting and cheasing and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 2.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. Make of Cable Havells, KEI, Anchor

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

Supply and fixing street light bracket for street light fittings made to shape as directed out of G.I. pipe light grade 32mm bore 1.5 mr long including fixing of light fittings and bracket with MS clamps, nuts and bolts of appropriate size complete all as specified and directed.

Taking down old unsv street lights and M&L for LED street light fitting of capacity 25 watt ( 5700 K) with high performance LED, Contemporary designed housing made of die cast aluminium with street optic lens for uniform light distribution rated IP 66 all as specified and directed. Make Wipro Cat part NoLR02-291-XXX-57-XX or equivalent in make of phillips, Oshram, GE, Halonix

Taking down old/unsv flood lights from high mast light of any type and M&L for LED flood light of capacity 250 watt IP 66 Lumainire with aluminium die cast housing toughened glass and unique lens system for enhancement illumination complete with all accessories Make Wipro cat part No LF3 -342-060-57XX or equivalent in specification of make phillips, Oshram,wipro, GE, Halonix

Taking down of exhaust fan any size/capacity after disconnecting cable connection, and refixing same in original position after necessary repair/over hauling including replacement of parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional and making connection by replacing PVC insulated unsheathed cable of copper conduct of size 1.5 Sqmm from ceiling rose/ connector fan (minimum 0.50 Mtr length) are deemed to be inclusive in quoted rate all as specified and as directed. (Note:- Repair, rewinding, over hauling and materials to be replaced are measured seperately.)

Note : The following shall be deemed to be inclusive in the unit quoted rate :- (a) In each job checking of functioning of fan including its connections, cleaning of fan, greasing of fan, mechanical check i.e. tightening of loose screw , nuts, bolts, are inclusive in unit quoted rate. (b) Defecting unserviceable part like fan bush, bearing etc will be paid under respective item here-in-after as supply only through proper documentation. (c) The entire job will be carried out in Akhnoor and necessary documents showing qtr No, bldg No supported with user signature shall be prepared as per format directed by Engr-in-charge and will be deposited to concerned JE (E/M) within 24 hrs. (d) Necessary complaint slip/complaint register & other stationery required shall be contractor responsibility. (e) Necessary T&P such as ladder, helper shall be contractor responsibility. (f) All types of T&P, PVC insulation tape, minor nuts, bolts, washers etc required for maintaining the services shall be provided by contractor without any cost to the department. (g) Any fan found defective/not working shall be brought to AGE E/M store yard & re-fixed after repairing.

Note : The following shall be deemed to be inclusive in the unit quoted rate :- (h) In case of major defects, entire job shall be completed within 10 days from the date of registration of complaint, failing which penalty charges @100/- per day shall be recovered. (j) In case of minor defects, entire job shall be completed with 12 hrs from the time of registration of complaint, failing which penalty charges @ 50/- per job shall be recovered. (k) The contractor shall maintain a record of all urgent/ routine works and if the work is repeated due to poor workmanship, he will be liable to repair the same without any extra expenditure to the Govt.

Jiwan Singh