Maharana pratap smarak evm Dr. shyama prasad smarak me soundaryakaran ka karya

Amount

(G Schedule Amount) Please Fill BOQ2 Total Amount

(H Schedule Amount) Please Fill BOQ3 Total Amount

Bidder Name

Amount

Vijay Electric Store (GSTN-NA) BID ID -2985598

JYOTI ENTERPRISES (GSTN-NA) BID ID -2985623

Description of Work / Item(s)

Amount

P/F IP-65/IP-66 protected heritage look or ornamental cast iron deocorative light height 609mm and with polycarbonate acrylic side cover of Warm White 20 W LED-24 watt LED light or any other colour with polycorbonate cover as per site requirement as per approved by engineer in charge on existing bracket as per approved drawing and design. Approved by Engineer

P/F IP-65/ IP-66 protected facade light luminaries în up down pattern or any other pattern light as per site reqiurement of Warm White or any other colour light as per direction of engineer incharge 10 W to 12 watt LED to highlight particular object as per site requirement as per approved by engineer in charge as per approved drawing and design.

Supply and fixing of round LED Rope/neon flex LED/Flexible strip type LED outdoor weaterproof Waterproof with IP65 rating, for superior life and withstanding harsh weather. Flexible, Slim & Compact. Applicable for bendable or angled patterns, or in continuous rows. Easy to form into any shape you want, adaptable to various places and locations. round LED Rope/neon flex LED/Flexible strip type LED having 3 to 6 watts/meter capacity and consisting suitable power adapter and driver complete with connection to operate system as and when etc as required. Colour of the rope light should be preferably yellow/ orange to be approved by Engineer incharge. All as per pre approved by Engineer incharge. Make Philips. Thaiai winro HPI, वल्स

SITC of IP65 protected decotarive fixture with high performance as given in the drawing the light fitting of cast aluminum shall have middle part of polycarbonate cover with concentric channel for protection of lamp with hieght 750mm. Suitable for W LED the designs of sharp edges cast aluminum designs to be welded to the aluminum frame shall de similar to once shown in the drawing the complete fixture is required with W LED 1936 146hter, terminal wiring & Connector etc.. complete as per direction of Engineer incharge as per site requirement as per approved by engineer in charge as per approved drawing and design Approved. by. Engineer

Providing & Fixing of IP65 protected impact resistant polycarbonate Polysterene enclosures. Make Hensel, Spelsberg Sintex, HPL, with knock out for cable entry out including fixing with nut, bolt, fatner etc as required complete in all respect of size 320 x 640 x 179 mmThe enclosure must comprise of digital timer, contactor, bus bar, mch, bypass switch and twin core 16 sq.mm. copper wire (Make- polycab/finolex/KEI) for connection. The digital time switch having following day/week programme and minimum 100 hours reserve and ACI rating of 16-20 amperes including making connection, programming conforming to IEC 60730-1 and 60730-2-7 etc. as required. One day & week reserve (digital type) Make- L&T/ABB/Legrand Siemens. The contactor must be a thermal over load relay with built in single phase protection and having at least INO & INC contacts, manual/auto reset facility including making connection testing ete, as required. 70 Amp Make-Siemens, ABB, L&T, HPL. The contactor must be accompanied with a bypass switch. The busbar must be of size 25mm*3mun and 100 mm length, the MCB must be 1 pole 6 nos and less than 80 amp all as per approved by engineer

Supply and erection of Decorative Cast Iron pole as per approved design of following length with base plate on the cement concrete foundation of M-15 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III). The pole shall be made of Cast Iron as per IS 210:1993, precision machining and filling job to achieve good finish and a fine coat of primer on each element before assembling. After assembling of each element one coat of primer and two coats of P.U. paint are applied. Approved coloured UV resist coating of mat/glossy/Heritage metallic finish followed after air drying of pole. The pole shall have a weatherproof flush door and locking arrangements, all necessary electrical accessories for electrical connection, / one arm/two arm bracket as per site requirement as per approved drawing design complete in all respect. 4.0 Mr. Note :- drawing approved by Engineer incharge

P & F of IP65 IK10 protected LED Bollard fixture. Light Fixture made of powder coated alluminium/Steel housing with diffuser for uniform distribution. The System level Luminous efficacy > 85 Lumen/W. SMD LEDS. CRI>70, CCT: 3000/4000/6000 K. The integral SMPS based electronic driver must be constant current and inbuilt surge protection of min. 4KV(L-N) and efficiency > 85%, PF>0.9 and input Voltage range of 90- 270V AC at 50Hz. System life of 50000 burning hours with 70% of Initial Lumens maintained. Light should include quick connecting cable coupled with various mounting accessories. Light output in Cool white or Warm White Colour as per engineers choice. Fixture must be in compliance with IS/CE Standards.

JYOTI ENTERPRISES (BID ID -2985623)

JYOTI ENTERPRISES (BID ID -2985623)

JYOTI ENTERPRISES (BID ID -2985623)