OHE Modification work related to improvement of Signalling & Traffic facilities at Manawala, Amritsar, Hamira, Dhilwan and Sultanpur Lodhi.

01-(OHE Works):

Preparation of drawing as per RDSO design for Over Head Equipment

Supply of Concrete for foundation and plinth in other than hard & rocky soil

Erection of Concrete for foundation and plinth in other than hard & rocky soil

Erection of Concrete for foundation and plinth in hard & rocky soil

Supply of galvanized steel fabricated masts / other supporting structure

Erection of galvanized steel fabricated masts / other supporting structure

Supply of fabricated and galvanized steel work (SPS) other than mast with necessary components

Erection of fabricated and galvanized steel work (SPS) other than mast with necessary components

Supply of Single bracket assembly (without insulator)

Erection of Single bracket assembly

Supply of composite type Stay and bracket tube insulators (CD 1050mm) for single bracket assembly

Supply of Stay and bracket tube Porcelain type insulators (CD 1050mm) for single bracket assembly

Erection of insulators for single bracket assembly Per Track

Supply of OHE with complete fitting (For Conventional type) without Contact & Catenary Wires as per explanatory Notes Per Track

Erection of OHE with complete fitting (For Conventional type) without Contact & Catenary Wires as per explanatory Notes

Supply of copper jumper wire

Erection of copper jumper wire

Supply of Guy Rod Assembly

Erection of Guy Rod Assembly

Supply of Composite 9T Insulators (CD 1050mm) as per latest RDSO Specifications

Supply of 9-Tonne Porcelain insulator (CD 1050mm)

Erection of 9-Tonne insulator

Supply of 9 tonne suspension insulator assembly including all accessories

Erection of 9 tonne suspension insulator assembly including all accessories

Supply of regulating equipment 3 pulley type ATD with counter weight

Erection of regulating equipment 3 pulley type ATD with counter weight

Supply of Section Insulator assembly including bar insulator assembly for conventional OHE

Erection of Section Insulator assembly including bar insulator for conventional OHE

Supply (without insulator) of 25KV Single Pole(SP) Isolator without earth contact assembly

Erection of 25KV Single Pole(SP) Isolator without earth contact assembly

Supply of 25KV post / pedestal insulators for isolators

Erection of 25KV post / pedestal insulators for isolators

Supply of an Earth contact assembly in an isolator

Erection of an Earth contact assembly in an isolator

Supply & erection of post and operating rod insulator

Supply of copper bus bar 18mm

Erection of copper bus bar 18mm

Supply of single earth electrode with earth pit complete as per RDSO Drg No. ETI / OHE / P / 7020 or latest

Erection of single earth electrode with earth pit complete as per RDSO Drg No. ETI / OHE / P / 7020 or latest

Manufacturing supply of Retro Reflective type structure Number plate as per RDSO drg. No.ETI / OHE / P / 7503 or latest along with all fixing arrangement.

Erection / Fixing of Retro Reflective type structure Number plate as per RDSO drg. No.ETI / OHE / P / 7503 or latest along with all fixing arrangement.

Supply of material without insulators for termination of OHE conductor

Erection of material for termination of OHE conductor

Supply of splicing and extension of anchored over head equipment with components

Erection of splicing and extension of anchored over head equipment with components

Supply of Structure Bonds

Erection of Structure Bonds

Supply of Transverse (cross rail, inter-track, Z & special type) bonds

Erection of Transverse (cross rail, inter-track, Z & special type) bonds

Supply of Longitudinal bonds

Erection of Longitudinal bonds

Supply of earth bus

Erection of earth bus

Supply and erection of standard Galvanized wire bond in place of M S Flat bond at designated locations in theft prone areas

Erection of bonds on platform area including drilling of holes in structure and rail including cutting of platform surface100mm x 500mm placing of bond and making good surface with PCC and providing cleats as per latest RDSO drawing

Supply and fixing of cleat 02 Nos. for each structure Bond on platform wall with screw

Supply of Contact wire Ending Clamp

Supply of Catenary wire Ending Clamp

Supply of electrolytic Copper Hard drawn Dropper wire 5mm dia

Erection of electrolytic Copper Hard drawn Dropper wire 5mm dia

Dismentling of OHE termination assembly

Dismentling & removal of Anchor assembly

Supply of Anti-Creep with componenet

Erection of Anticreep with component

Dismantling of Bracket Assembly

Cutting and removal of existing structure

Dismantling of Guy Rod Assembly

Dismantling of fabricated steel other than mast Per Track

Dismantling of OHE / Alluminium Feeder Wire

Dismantling of copper jumper

Shifting of ATD / BWA from one mast to another

Raising / Restoration of OHE height as per OHE profile by Change of incumbrance / Re-droppering of span

Adjustment of Turnout or insulated / un-insulated overlap

Dismantling of Three Puley type ATD & termination

Dismantling of 9-Tonne insulator

Extra on Supply of additional fitting at turn-out, diamond crossing or overlap

Extra on erection of additional fitting at turn-out, diamond crossing or overlap

Transfer of equipment from one support to another

Supply of Large Copper Jumper wire 160 Sqmm

Erection of Large Copper Jumper wire 160 Sqmm

Supply of Large Span Wire (130 Sq mm)

Erection of Large Span Wire (130 Sq mm)

Supply of Large Span Ending (130 Sq mm)

Erection of Large Span Ending (130 Sq mm) Square

Fabrication, developing and supply of fabricated Sectioning Diagram, Schematic and TSWR diagram Boards with computerized digital printing on adhesive Venyle of adequate size as per requirement Square

Modification in already developed Sectioning Diagram, Schematic and TSWR diagram Boards in different sizes with computerized digital printing on adhesive Venyle of adequate size as per requirement

Re-painting on existing OHE structures with water proof yellow enameled paint as per explanatory notes (Rate included material & erection)

Re-writing on existing OHE structures as per explanatory notes (Rate included material & erection).

Development & supply of Appendix-G to Station working rules with drawing erection

Supply and erection of "Electric Engine Stop" Board size 900x600x 2mm with supply of fixing material (Clamp, back flat strip & fasteners)

Supply and erection of "Caution unwire turnout" Board size 900x600x 2mm with supply of fixing material (Clamp, back flat strip & fasteners)

Supply and erection of "Caution live wire" Board size 400x270x 2mm with supply of fixing material (Clamp, back flat strip & fasteners)

Supply and erection of "Caution clearance to OHE nearby restricted" Board size 450x270x 2mm with supply of fixing material (Clamp, back flat strip & fasteners)

Supply and erection of "Power Block Working Limit" Board size 450x450x2mm with supply of fixing material (Clamp, back flat strip & fasteners)

Supply and erection of "Protective Area" Board size 12"x18" with supply of fixing material (Clamp, back flat strip & fasteners)

Manufacturing, Supply & erection of Engine Stop Board / Public Caution Boards for Height Guage Uprights of L/xing of size 600 x 900 x 2mm with supply of fixing material (Clamp, back flat strip & fasteners)

Supply of various types 25KV caution Board / Plates as per explanatory Notes

Erection of various types 25KV caution Boards / plates as per explanatory Notes

Supply of various types of 25KV Danger Boards / plates as per explanatory notes

Erection of various types of 25KV Danger Boards / plates as per explanatory notes

Design, manufacturing, supply of Retro Reflective type Sigma Board with non- 101 reflective black ground as per RDSO drg. No. TI/Drg/OHE/PLTBRD/RDSO/ 00036/12/0 (Size 450 mm x 600 mm) and RDSO specification No. ETI/OHE/33A (12/97) Rev. 8 or latest including transportation and all taxes etc.

Cost of 4 Nos. 12mm dia GI nuts & bolts 300 mm long (fully threaded) with necessary washer, spring washer for different OHE Mast / Portals etc including transportation and all taxes

Cost of GI backing angle for mounting arrangement size 40x40x5x450mm (4 Nos.) including transportation and all taxes

Erection of clamps-GI backing angle for arrangement size 40x40x5x450mm (4 Nos.) 104 12mm dia GI nuts & bolts 300 mm long (fully threaded) with necessary washer, spring washer including Retro Reflective type sigma board with non reflective back ground at different OHE Mast / Portals etc including transportation and all taxes

Breaking of all type of Foundations of mast / Portal / TTC etc

Supply of 250m DJ Board

Erection of 250m DJ Board

Supply of 500m DJ Board

Erection of 500m DJ Board

Supply of DJ open Board

Erection of DJ open Board

Supply of DJ close Board

Erection of DJ close Board

Handling, Leading, loading and Transportation charges for Railway supply material from different Railway sites and released material from different Railway sites, if any to concerned TRD Depot

Supply of 10KVA, 25KV/240Volts Auxiliary Transformer (AT) confirming to RDSO Spec. No.ETI/PSI/15 (08/2003) or latest

Erection, oil filtration, testing & commissioning of 5/10/25 KVA, 25KV/240 Volts Auxiliary Transformer (AT) confirming to RDSO Spec.No. ETI/PSI/15 (08/2003) or latest

Supply of 25KV Drop Out (D.O.) fuse switch assembly complete

Erection of 25KV Drop Out (D.O.) fuse switch assembly complete

Supply of copper strips of size 25mmx3mm for earthing of AT with masts

Erection of copper strips of size 25mmx3mm for earthing of AT with masts

Supply of Anti-climbing device for LT supply Auxiliary Transformer station

Erection of Anti-climbing device for LT supply Auxiliary Transformer station

Supply and fabrication of MS Split type Arcing Horns of size 14mm dia made of MS Galvanized Rod

Fixing and commissioning of Arcing Horns on 25KV/240V ATs of 10/25KVA

Supply and fixing of Cast iron / good quality plastic body Silica Gel breathers

Supply of XLPE insulated PVC sheated Aluminium conductor cable 70 sqmm, 2 core suitable for outdoor applications 1100 volt grsde armoured aluminium cable from AT to distribution box. of copper strips of size 25mmx3mm for earthing of AT to OHE masts

Installation of XLPE insulated PVC sheated Aluminium conductor cable 70 sqmm, 2 core suitable for outdoor applications 1100 volt grsde armoured aluminium cable from AT to distribution box. of copper strips of size 25mmx3mm for earthing of AT to OHE masts

Supply of Contact wire splice complete (toothed type) conf. RDSO Drg. No. ETI/OHE/P/ 1080-1 (Mod.B) or latest.

Supply of Catenary wire splice complete (65) conf. RDSO Drg. No. ETI/OHE/P/ 1090 or latest.

Hand operated megger Range 0-500V insulation resistance testing range-from 0 to infinite Megaohm

Operating Rod (Pole) for 25 KV Drop out fuse switch as per RDSO's Spec. No. ETI/PSI/14(1/86) rev-1 or latest

ALUMINIUM EXTENSION LADDER 11M.Aluminium ladder extension wall support ladder 24/40 as specification given below aluminium alloy wall support extension ladder proved with top 132 hand rails and platform steps made of 26* 3 MM round corrugated fluted pipe main extrusion made up of aluminium alloy section 66*32*3.18 thickness of the 30 grade T6 TEMPE, closed height 24 feet additional MSGUIDE PIPE fixed inside height 40 feet additional MSGUIDE pipe fixed inside of the ladder at 1 mtr internal for stability of ladder arms.

Supply of Packing Saddle copper RI No.1174, Drg. Ref. No. RE/33/P/1174 Rev-B or latest

PSI Discharge Rod assembly suitable for 25 KV / 33 Kv AC traction System with two Clamp suitable for 36 to 50 mm dia as per specification no ETI/OHE/51 (9/87) rev -1 (Oct-92) Drawing no. TR- D/ALD/3/2017

02-(@ 100% Extra on erection rates for work done under Power Block):

Erection of galvanized steel fabricated masts / other supporting structure

Erection of fabricated and galvanized steel work (SPS) other than mast with necessary components

Erection of Single bracket assembly

Erection of insulators for single bracket assembly Per Track

Erection of OHE with complete fitting (For Conventional type) without Contact & Catenary Wires as per explanatory Notes

Erection of copper jumper wire

Erection of Guy Rod Assembly

Erection of 9-Tonne insulator

Erection of 9 tonne suspension insulator assembly including all accessories

Erection of regulating equipment 3 pulley type ATD with counter weight

Erection of Section Insulator assembly including bar insulator for conventional OHE

Erection of 25KV Single Pole(SP) Isolator without earth contact assembly

Erection of 25KV post / pedestal insulators for isolators

Erection of an Earth contact assembly in an isolator

Erection of copper bus bar 18mm

Erection of material for termination of OHE conductor

Erection of splicing and extension of anchored over head equipment with components

Erection of electrolytic Copper Hard drawn Dropper wire 5mm dia

Dismentling of OHE termination assembly

Dismentling & removal of Anchor assembly

Erection of Anticreep with component

Dismantling of Bracket Assembly

Cutting and removal of existing structure

Dismantling of Guy Rod Assembly

Dismantling of fabricated steel other than mast Per Track

Dismantling of OHE / Alluminium Feeder Wire

Dismantling of copper jumper

Shifting of ATD / BWA from one mast to another

Raising / Restoration of OHE height as per OHE profile by Change of incumbrance / Re-droppering of span

Adjustment of Turnout or insulated / un-insulated overlap

Dismantling of Three Puley type ATD & termination

Dismantling of 9-Tonne insulator

Extra on Supply of additional fitting at turn-out, diamond crossing or overlap

Extra on erection of additional fitting at turn-out, diamond crossing or overlap

Transfer of equipment from one support to another

Erection of Large Copper Jumper wire 160 Sqmm

Erection of Large Span Wire (130 Sq mm)

Erection of Large Span Ending (130 Sq mm)

Erection of clamps-GI backing angle for arrangement size 40x40x5x450mm (4 Nos.) 39 12mm dia GI nuts & bolts 300 mm long (fully threaded) with necessary washer, spring washer including Retro Reflective type sigma board with non reflective back ground at different OHE Mast / Portals etc including transportation and all taxes

Erection of 250m DJ Board

Erection of 500m DJ Board

Erection of DJ open Board

Erection of DJ close Board

Erection, oil filtration, testing & commissioning of 5/10/25 KVA, 25KV/240 Volts Auxiliary Transformer (AT) confirming to RDSO Spec.No. ETI/PSI/15 (08/2003) or latest

Erection of 25KV Drop Out (D.O.) fuse switch assembly complete

Erection of copper strips of size 25mmx3mm for earthing of AT with masts

Erection of Anti-climbing device for LT supply Auxiliary Transformer station

Fixing and commissioning of Arcing Horns on 25KV/240V ATs of 10/25KVA

Installation of XLPE insulated PVC sheated Aluminium conductor cable 70 sqmm, 2 core suitable for outdoor applications 1100 volt grsde armoured aluminium cable from AT to distribution box. of copper strips of size 25mmx3mm for earthing of AT to OHE masts

03-(@ 50% Extra for steel erection work done manually under Power

Erection of galvanized steel fabricated masts / other supporting structure

Erection of fabricated and galvanized steel work (SPS) other than mast with necessary components

04-(GST @ 18% or as applicable)

GST @ 18% applicable on all items under Schedule-1, 2 & 3.