Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹60.1 LAccepted-AOC | ₹60.1 L Quoted ₹62.0 L | L1 | Accepted-AOC Awarded being lowest as per NIT |
| 2 | L2₹62.3 LRejected-Finance | ₹62.3 L | L2 | Rejected-Finance Rejected being L2 bidder |
| 3 | L3₹62.8 LRejected-Finance | ₹62.8 L | L3 | Rejected-Finance Rejected being L3 bidder |
| 4 | L4₹64.6 LRejected-Finance | ₹64.6 L | L4 | Rejected-Finance Rejected being L4 bidder |
| 5 | L5₹66.4 LRejected-Finance | ₹66.4 L | L5 | Rejected-Finance Rejected being L5 bidder |
| Sl No | Description | Qty | Unit | M/S PARVEZ AHMAD LONE L4 | M/S D N Enterprises L3 | M/S DFA Enterprises L2 | M/S NORTHERN ELECTRICAL WORKS L5 | M/S BASHIR AHMAD MIR L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for preparation of old distempered surfaces of walls by washing, rubbing down stopping and applying one coat of oil emulsion distemper complete all as specified and directed. | 2,500 | Sqm | 25 ₹62,500 | 35 ₹87,500 | 15 ₹37,500 | 15 ₹37,500 | 17 ₹42,500 |
| 2.00 | M&L for preparation of old distempered surfaces of walls by washing, rubbing down stopping and applying two coat of oil emulsion distemper complete all as specified and directed. | 4,000 | Sqm | 27 ₹1.1 L | 35 ₹1.4 L | 15 ₹60,000 | 20 ₹80,000 | 30 ₹1.2 L |
| 3.00 | M&L for preparation of old distempered surfaces of ceiling by washing, rubbing down and stopping and applying one coat of oil emulsion distemper complete all as specified and directed. | 2,500 | Sqm | 27 ₹67,500 | 35 ₹87,500 | 15 ₹37,500 | 15 ₹37,500 | 17 ₹42,500 |
| 4.00 | M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 1,800 | Sqm | 33 ₹59,400 | 40 ₹72,000 | 15 ₹27,000 | 30 ₹54,000 | 30 ₹54,000 |
| 5.00 | M&L for complete removal of the existing treatment on walls by scraping and washing down with water and applying one coat of primer and treating with two coats of oil emulsion distemper over 2mm thick wall care putty complete all as specified and directed. | 600 | Sqm | 35 ₹21,000 | 50 ₹30,000 | 30 ₹18,000 | 100 ₹60,000 | 65 ₹39,000 |
| 6.00 | M&L Lagging to pipes internal dia 15mm used in internal water supply or plumbing all round with, 25min thick bonded mineralwool preformed ‘SNAP ON ’pipe sections of density 144Kg/cum conforming to IS9842 including chicken mesh wire netting 25 gauge, 20mm mesh allowed & with 0.01mm aluminium foil complete all as specified and directed. | 50 | RM | 110 ₹5,500 | 100 ₹5,000 | 200 ₹10,000 | 90 ₹4,500 | 100 ₹5,000 |
| 7.00 | M&L Lagging to pipes of internal dia 20mm used in internal water supply or plumbing all round with, 25min thick bonded mineralwool preformed ‘SNAP ON ’pipe sections of density 144Kg/cum conforming to IS9842 including chicken mesh wire netting 25 gauge, 20mm mesh allowed & with 0.01mm aluminium foil complete all as specified and directed. | 50 | RM | 110 ₹5,500 | 100 ₹5,000 | 200 ₹10,000 | 100 ₹5,000 | 100 ₹5,000 |
| 8.00 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. | 80 | RM | 10 ₹800 | 8 ₹640 | 15 ₹1,200 | 10 ₹800 | 20 ₹1,600 |
| 9.00 | S&F 110mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. | 40 | RM | 300 ₹12,000 | 195 ₹7,800 | 225 ₹9,000 | 200 ₹8,000 | 250 ₹10,000 |
| 10.00 | S&F 75mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. | 40 | RM | 220 ₹8,800 | 190 ₹7,600 | 200 ₹8,000 | 150 ₹6,000 | 200 ₹8,000 |
Updated dates
Tender Value
₹83 L
EMD Value
₹1.5 L
Closing Date
6 Nov 2025, 6:00 pmClosed
CWE, HQ 133 WORKS ENGRS
HQ 133 WORKS ENGRS, PIN 914133, c/o 56 APO
CA NO. CWEK/TOKEN-90/864 EWS/2025-26 REPAIR TO FOOTPATH, CULVERTS, DRAIN/DRAIN COVER, HUME PIPES AND SEWAGE LINE IN ZONE A IN THE AOR OF AGE B/R-I AND COMPREHENSIVE MAINTENANCE OF B/R WORK IN THE AOR OF AGE-III, UNDER GE 864 EWS
2025_MES_731423_2
CWEK/TOKEN-90/864 EWS/2025-26
Open Tender
Civil Works
270 days
GE 864 EWS
Class C and above and category a (i)
7 documents required · 7 mandatory
₹1,000
GE 864 EWS
₹1.5 L
HQ 133 WORKS ENGRS
29 Dec 2025
18 Oct 2025
11 Nov 2025
18 Oct 2025
6 Nov 2025
25 Oct 2025
18 Oct 2025 - 21 Oct 2025
23 Oct 2025
Amount
M&L for preparation of old distempered surfaces of walls by washing, rubbing down stopping and applying one coat of oil emulsion distemper complete all as specified and directed.
M&L for preparation of old distempered surfaces of walls by washing, rubbing down stopping and applying two coat of oil emulsion distemper complete all as specified and directed.
M&L for preparation of old distempered surfaces of ceiling by washing, rubbing down and stopping and applying one coat of oil emulsion distemper complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for complete removal of the existing treatment on walls by scraping and washing down with water and applying one coat of primer and treating with two coats of oil emulsion distemper over 2mm thick wall care putty complete all as specified and directed.
M&L Lagging to pipes internal dia 15mm used in internal water supply or plumbing all round with, 25min thick bonded mineralwool preformed ‘SNAP ON ’pipe sections of density 144Kg/cum conforming to IS9842 including chicken mesh wire netting 25 gauge, 20mm mesh allowed & with 0.01mm aluminium foil complete all as specified and directed.
M&L Lagging to pipes of internal dia 20mm used in internal water supply or plumbing all round with, 25min thick bonded mineralwool preformed ‘SNAP ON ’pipe sections of density 144Kg/cum conforming to IS9842 including chicken mesh wire netting 25 gauge, 20mm mesh allowed & with 0.01mm aluminium foil complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed.
S&F 110mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 75mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
M&L for Khatamband pattern false ceiling design as approved by GE with ornamental wood work made out of 6 mm thick deodar wood, cutting holes for ceiling lights and having two coats of varnish (Make: touch wood of asian paint or equivalent) over a coat of natural wood primer including dimantiling of old ceiling of any description and thickness. The Khatamband to be fixed over 12 mm thick BWR plywood over timber scantling frame work of size 600 mm X 600 mm with second class hardwood 100 mm X 75 mm as main joist and 50 mm X 50 mm secondary joist fixed with nails / screws and finally finshing with french polish ( two or more coats ) complete all as specified and directed.
M&L for wooden pre- laminated flooring of size 1200 X 200 and 8 mm thick with adhesive and base as specified by manufaacturers instructions fixed in repairs complete all as specified and as directed
S&F in repair 15 mm bore Brass CP Wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
M&L for Block boards, grade 1 quality, exterior grade, 18/19 mm thick decorative type with decorative face veneer on both face complete all as specified and directed
M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid over Anodised aluminium snap grid frame work for false ceiling all as specified size of grid 605 x 605mm including dismantling of old unserviceable ceiling board completed all as specified and directed.
S&F Hollow PVC Wall Lining consisting of 5mm thick plain colour PVC sheet fillet of width 20mm 'L' & 'U' for wall panelling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing including dismantling of old unserviceable wall & Ceiling board complete all as specified and directed.
S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roof, wall etc. with grade of zinc coating 275 including dismantling of old unserviceable sheet complete all as specified and directed.
S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers, in roof, wall etc. including dismantling of old unserviceable sheet complete all as specified.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Map as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old unserviceable sheet complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws incl dismantling of sheet complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise Specifically provided for complete all as specified and directed.
S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee, angle, channel or flat sections) including distance pieces,cleats etc Fe 410-w(Gde-E-250)Quality-A complete all as specified and directed.
S&F for joist,channel,angle,or tee sections,fixed independently, without connecting plates,etc (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe-410 W(Gde- E-250)Quality-A complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed.
M&L for coloured glazed ceramic tiles on vertical surface 450x 350 and 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile fixed over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Demolition of cement concrete un-reinforceed in ground floor and paving n.exc 15 cm thick below or above ground level complete all as specified and directed.
Demolition of cement concrete (un-reinforced)of any description and any position not otherwise specifically provided complete all as specified and directed
M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) light shade, polished, area of each tiles exceeding 0.36sqm but not exceeding 0.42sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM 1:4, complete all specified and directed.
M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM 1:4, complete all specified and directed.
M&L for vitrified ceramic tiles light shade 10mm thick (square/Rectangular) polished, area of each tile n exc 0.36 Sqm in vertical surfaces such as walls, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, fixed over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed.
M&L for 18-20mm thick Granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified & directed.
M&L for Chequered cement concrete tiles 30cmx30cmx22-25mm thick, with white cement and pigments set, jointed in neat cement slurry in floors laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified & directed.
M&L providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base of flooring/ hard standing complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.
Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished to even & smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished to even & smooth without using extra cement complete all as specified and directed.
M&L for 5mm thick rendering in CM 1:4 on ceiling surfaces finished to even and fair complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of new surface of walls and applying two coats oil bound distemper over a coat of suitable primer, complete all as specified and directed.
M&L brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 including dismantling of old unserviceable brick work complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.
S&F in repair 15mm bore sink mixer for mixing hot or cold water, brass, CP, fancy type, with capstan head handles, screwed down high pressure, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover closed pattern with flat bottom and cover with PVC hing devise, fixing bolt for pedestal pattern complete all as specfied and directed.
S&F in repair PVC low level flushing cistern 10 liter capacity, valveless, syphonic action type with float, handle including 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket complete all as specfied and directed.
S&F in repair Vitreous china wash basin white flat back size 580mm x 450 mm excluding taps waste chain and plug and porcelain stopper but including brackets and 15 mm bore CP centre hole mixer complete all as specfied and directed.
S&F in repair Angle valve / Stop valve 15mm dia cast copper alloy chromium plated fancy type without shank and cup concealed type srewed for iron pipe or for union complete all as specfied and directed.
S&F in repair stainless steel plate rack of size 786 x 610 x 254mm made out of 1.00mm thick stainless steel sheet of first quality complete all as specified and directed.
Taking up or down 15mm bore dia, steel tubing & connections including cleaning for refixing or removal from site complete all as specfied and directed.
Taking up or down 20mm bore dia, steel tubing & connections incl cleaning for refixing or removal from site complete all as specfied and directed.
S&F steel water tubing galvanised 15mm bore, medium grade fixed to walls and ceiling or laid in floor complete all as specfied and directed.
S&F steel water tubing galvanised 20mm bore, medium grade fixed to walls and ceiling or laid in floor complete all as specfied and directed.
S&F rotional molded polythylene water storage tank 500 ltr capacity, three layer (Cylinderical vertical with closed top) hoisted and fixed in position incl dismantling water tank complete all as specified and directed.
S&F rotional molded polythylene water storage tank 1000 ltr capacity, three layer (Cylinderical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank complete all as specified and directed.
S&F in repair 25 mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.
S&F in repair 25 mm PP-R Gate valves (brass insert) as per requirement of the site all as specified.
S&F in repair 25 mm PPR unions fixed as per site requirement all as specified.
Taking down Chowkhat with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.
Taking down Chowkhat with shutters (without taking off shutters from frame) n.exc 1.5 sq.m each complete all as specified and directed.
Taking down shutters n.exc 1.0 sqm each complete all as specified and directed.
Taking down shutters exc 1 sqm but n.exc 2 sqm each complete all as specified and directed.
S&F for 2nd class hard-wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.
S&F factory made 35mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a) complete all as specified and directed.
S&F factory made for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter any number of panel with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln easoned and chemically pressure treated complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.
S&F 150 mm extruded Aluminium alloy handles, fabricated type complete all as specified and directed.
S&F 100 mm extruded Aluminium alloy handles, fabricated type complete all as specified and directed.
S&F Aluminium anodised barrel tower bolt of extruded section 200 mm long complete all as specified and directed.
S&F Aluminium anodized, barrel tower bolt 150mm long of extruded section, complete all as specified and directed.
S&F mild steel butt hinges medium weight 100 mm long etc complete all as specified and directed.
S&F 300mm mild steel ordinary rat tail rod pattern springs incl roller and roller plate complete all as specified and directed.
S&F 300mm mild steel sliding door bolts, clip type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing.
S&F factory solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing
M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
S&F in repair Harrison rails, mild steel, chromium plated with brakcet, knobs, rings @ 10cm c/c etc complete all as specified and directed.
S&F in repair 30mm (width of flap) continuous (piano) hinges, brass, bright finish or electrogalvanised complete all as specified and directed.
S&F in repairs one piece EWC Casino with soft close with seat cover complete all as specified and directed.
S&F in repair brass CP Wall mixer fancy type 3 in 1 for mixing hot and cold water screwed down for iron pipe including concealed GI pipe from mixer to head shower complete all as specified and directed.
M & L for 75 mm thick cement concrete 1:3:6 type using C-2 (20mm graded stone aggregate as in sub base/flooring /hardstanding complete all as specified and directed by Engineer-in-Charge.
M&L Glazed coloured Chequered cement concrete tiles with PU Moulded glossy finished of size 30 cm x 30 cm and 22 mm thick, set, jointed and pointed in neat cement slurry (with grey cement and pigment) as in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L providing and laying 80 mm thick factory made chamfered edge cement concrete pavor block of M-30 grade with approved colour , design and pattern as in foot path,parks ,lawns ,drive ways or light traffic parking etc of required strength, thickness size /shape , made by table vibratory method using PU mpuld, laid in required colour and pattern or and including 50 mm thick compacted bed of fine sand , compacting and proper embedding /laying of interlocking pavor blocks into the sand bedding layer through vibratory compaction by using plate vibrator ,filling the joints with sand and cutting of pavor blocks as per required size and pattern ,finishing and sweeping extra sand etc all as specified and directed by Engineer-in-charge
M &L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
S&F stone sett flooring with stone setts of size 100 to 300mm long, 100mm to 200mm wide 50mm to 150mm depth and sides dressed, bedded in cement mortar 1:3, joints 20mm thick, grouted in cement mortar 1:2 with and admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and directed by Engr-in-Charge.
Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:3:6 Type C-2 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed
M&L for PCC 1:2:4 type B1 (using 20mm aggraded stone aggregate ) as in coping etc including form work complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.
M&L for preparation of new plastred surface of wall and applying two coats of Cement base paint over a coat of alkale resistant priming paint complete all as specified and directed.
S&F mild steel round bars, conforming to Gde-I (IS : 432 Part-I) Part-I, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-in-Charge.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed by Engineer-in-Charge.
M&L for Framed work such as in angle iron frames for manhole, covers and similar work confirming to Fe 290 grade E-165 complete all as specified and as directed.
Demolition of RCC of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), complete all as specified and directed by Engineer-in-Charge.
M&L for precast RCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in cover slab for manhole set in CM 1:4 etc. including necessary formwork, complete all as specified and directed by Engineer-in-Charge.
M &L boulder pitching, laid dry hand packed tightly is grouted with cement and sand mortar 1:6 all as specified and directed.
Dismantling cast iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engineer-in-Charge.
S&F outdoor cast iron street utility parking ornamental design bollards as road safety barrier of shape & size as shown in sketch 'A' with all fittings & fixtures such as hook fixing type minimum 100mm dia cylindrical shape 1.00 mtr height complete all as specified and directed by Engr-in-Charge.
S&F black alloy steel chain ornamental design including hook etc. for hanging the chain in between cast iron ornamental design parking bollards (item No 102 here-in-before) complete all as specified and directed. Note: The weight of ornamental chain will be decided by BOO to convened by GE before payment against this item.
M&L for cement concrete 1:3:6, Type C2 using (40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation for shafts, cills, cesspits, manhole pier holes n.exc 10Sqm on plan and getting out in hard/dence soil complete incomplete all as specified and directed.
Returning filling in including spreading levelling, watering and well ramming in layers n.exc 25cm thick in hard / dence soil complete all as specified and directed.
M&L for 300mm bore RCC pipes Class NP2 with collar ,laid in trenches and jointed including dismantling of old unserviceable pipe complete all specified & directed.
All as per ser item No 107 here-in-before but 200mm dia.
M&L Cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in concrete bed to drain pipes 300mm internal bore including packing under and hunching against the sides of pipes after they are laid and tested, in complete all as specified and directed.
All as per ser item No. 109 here-in-before but 200mm dia.
M/S DFA Enterprises (BID ID -3460358)
M/S D N Enterprises (BID ID -3463528)
M/S PARVEZ AHMAD LONE (BID ID -3468809)
M/S NORTHERN ELECTRICAL WORKS (BID ID -3468861)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
Tender90.pdf
Tender Documents • 1.12 MB
BOQ_824254.xls
BOQ • 0.38 MB
Drawing90.pdf
Additional Documents • 0.17 MB
Download all tender documents and submit your bid