Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.3 LAccepted-AOC HOUSE NO 8A OPPOSITE ST JOHN S SCHOOL AK AZAD ROAD REHABARI GUWAHATI ASSAM 781008 | KAMRUP METRO | ASSAM | 781008 | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹51.0 L+₹8.8 L (20.9%)Rejected-Finance JYOTINAGAR WEST NEAR HOLLY CHILD SCHOOL GUWAHATI 7810212 ASSAM | KAMRUP METRO | ASSAM | 781021 | L2 | Rejected-Finance Other than L1 bidder |
Tender Value
₹51 L
EMD Value
₹1.0 L
Closing Date
23 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Shillong
HQ CWE Shillong, SE Falls, Shillong - 793011
COMPREHENSIVE INTEGRATED MAINT WORK AT OFFR MD ACCN A BLOCK UNDER GE NARANGI
2023_MES_628100_1
8689/NAR/E8
Open Tender
Civil Works
Item Rate
334 days
Narangi
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GE Narangi
₹1.0 L
Yes
6 Nov 2024
13 Nov 2023
25 Dec 2023
13 Nov 2023
23 Dec 2023
4 Dec 2023
Amount
PART-I (EARTHWORK)
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m deep for foundation or for shafts, wells cesspits, man holes etc not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in soft / loose soil complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
Removing excavated soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point etc complete all as specified and directed.
PART-II (B/R PORTION)
Dismantling of asbestos cement sheet (corrugated or semi corrugated etc) as in roofing complete all as specified and directed.
Supply and fixing 6mm thick thick asbestos cement, corrugated sheets as in roof, wall etc, fixed with 'L' type or 'J' type or cranked hook bolts complete all as specified and directed.
All as per item No 2.002 here-in-before but except sheet complete all as specified and as directed.
Supply and fixing asbestos cement two piece adjustable serrated ridge for corrugated or semicorrugated sheets fixed with L type or J type or cranked hook bolts complete all as specified and directed.
Dismanting of plain or corrugated steel sheeting, any gauge or any thickness in roof covering complete all as specified and directed.
Supply and fixing 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' type or 'J' type or cranked hook bolts, in roofs, walls etc with grade of zinc coating 120 gm/sqm complete all as specified and directed.
All as per item No 2.006 here-in-before but except sheeting complete all as specified and directed.
Material and labour for 0.63 mm thick plain galvanised mild steel sheeting with 150gm per sqm galvanized as in ridge, hips, valley gutter etc complete all as specified and as directed.
Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
Supply and fixing in repair for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mm x 600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Non Asbestos Fiber Cement plain Board (E-Board Classic) in a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall, Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mm x 600 mm grid complete all as specified and directed.
Supply and fixing as in repair for 4 mm thick non asbestos fibre cement bilding boards fixed in ceiling or laid/inserted to timber/GI/Aluminium frame work with screws complete all as specified and directed.
Demolition of brick or stone masonry work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as specified and directed.
Material and labour for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
Material and labour for brick work with subclass ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius as in half brick thick wall, built in cement mortar (1:4) complete all as specified and as directed.
Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Material and labour for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregates) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and directed.
Material and labour for PCC 1:3:6 type C1 (using 20mm graded stone aggregates) as in bed block or hold fast including making good dismantled portion complete all as specified and directed.
Material and labour for 50 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in padding of roof top finishing even and smooth without using extra cement to ascertain the proper slope with using WPC as per manufacturer instruction complete all as specified and directed. Note: WPC shall be measured and paid separately
Supply only liquid water proofing compound complete all as specified and directed.
Material and labour for 75mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregates) as in path, hard standing etc,finished even and smooth without using extra cement complete all as specified and directed.
Cutting and uprooting vegetation growth/ plants of any size on roof surface or chajja including muds and disposal the same to a distance not exceeding 50 m and cleaning the site complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for including removal of spoils/ demolished materials not exceeding 50m and depositing complete all as specified and directed.
Material and labour for RCC type- A1 , 1:1.5:3, (using 20mm graded stone aggregates) as in Slabs supported on walls,sunshade, chajja, floors, roofs, landings, balconies, canopies, deck slabs etc. complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed.
Material and labour for pre cast RCC cover slab, type B-1, 1:2:4 (Using 20 mm graded crushed stone aggregate ) as in manhole cover slab etc., and set in cement mortar 1:4 including necessary form work complete all as specified and directed
Material and labour for TMT bars 10 mm dia and over cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Material and labour for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1998 grade St.-240 complete all as specified and directed.
Material and labour for mild steel flat iron hold fasts fixed to chowkats confirming to Fe-290 Gde-E-165 etc, complete all as specified and directed.
Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed
Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.
Material and labour for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.
Material and labour for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed
Material and labour for preparation of new surfaces of wall and applying two coats of oil bound distemper over one coat of primer including a coat of wall care putty complete all as specified and directed .
Material and labour for complete removal of existing treatment of wall and applying two coats of oil bound distemper over one coat of primer including a coat of wall care putty complete all as specified and directed .
Material and labour for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and directed.
Material and labour for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
Material and labour for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and directed.
Material and labour for preparation of old painted surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for Preparation of old decorated surfaces of wall and applying one coat of cement base paint complete all as specified and directed.
Material and labour for complete removal of the existing treatment and applying two coats of water based premium exterior emulsion weather coat paint over a coat of primer complete all as specified and directed.
Material and labour for waterproof cement based puty @ 1 kg (undiluted) per sqm of average thickness 1 mm over plaster / old painted surface after scraping the prepared surface even and fair complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.
Material and labour for coloured non skid cermic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of the tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
Material and labour for coloured Non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of the tiles over and including 15 mm thick screed bed or bedding layers in CM 1:4 complete all as specified and directed.
Material and labour for Vitrified ceramic tiles light shade 9 to 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of the tiles over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
Material and labour for vitrified ceramic tiles, light shade, 9 to 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in skriting dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of the tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Material and labour for glazed light coloured/printed ceramic tiles 450 x 300 x 7mm thick in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to to match with the shade of the tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Demolition of stone slab and tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and directed.
Material and labour for 15mm to 16mm thick green marble slab for kitchen platform / shelf and vertical faces duly machine polished full round on external/ projected surface over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed.
Material and labour for machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing over and including 20 mm thick screed in cement mortar 1:6 complete all as specified and directed.
Taking down chowkats with shutters including builders hardware (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each including shutter with builders hardware (without taking off shutters from the frame) complete all as specified and directed.
Taking down shutter of any description exceeding 1 sqm but not exceeding 2 Sqm each including builders hardware complete all as specified and directed.
Taking down shutters of any description not exceeding 1 Sqm each including builders hardware complete all as specified and directed.
Material and labour for 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
Supply and fixing 30 mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed.
Supply and fixing 30mm thick glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I Section No. 8, Clause No. 8.21(a) complete all as specified and directed.
Supply and fixing 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (b) complete all as specified and directed.
Supply and fixing factory made solid PVC Door Frame of size 40mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
Supply and fixing Factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specfication, drawing and complete all as specified and directed
Supply and fixing in repair prelaminated particle board 18/19mm, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws and magnet catcher to timber frame work complete all as specified and directed.
Supply and fixing 100 mm size stainless steel butt hinges complete all as specified and directed.
Supply and fixing 75 mm size stainless steel butt hinges complete all as specified and directed.
Supply and fixing 125 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
Supply and fixing 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
Supply and fixing 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
Supply and fixing 100 mm long Extruded, anodised Aluminium alloy handles, fabricated type complete all as specified and directed.
Supply and fixing 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and directed.
Supply and fixing in repair 125 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
Supply and fixing in repair 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
Supply and fixing in repair 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
Supply and fixing in repair 100 mm long Extruded, anodised Aluminium alloy handles, fabricated type complete all as specified and directed.
Supply and fixing in repair 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and directed.
Supply and fixing 100 mm size aluminium anodised hasp and staple with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
Supply and fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples complete all as specified and directed.
Supply and fixing in repair Statinless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply and fixing in repair floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm, anodized with hard drawn steel spring, fixed in floors complete all as specified and directed.
Supply and fixing aluminium door seal fixed to door shutter with screws complete all as specified and directed.
Supply and fixing in repair 25 mm dia stainless steel tublar curtain rods including fancy type with fixing brackets, stops, rollers etc. complete all as specified and directed.
Supply and fixing in repair 25mm dia anodised aluminium tubular curtain rods ncluding fancy type with fixing brackets, stops, rollers etc. complete all as specified and directed.
Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
Supply and fixing 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.
Supply and fixing 4mm thick figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.
Material and labour for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and directed.
Material and labour for preparation of newly steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide or zinc chrome primer complete all as specified and directed.
Taking up or down steel water tubing 15 mm bore from trenches/wall, ceiling or floors including all fittings complete all as specified and directed.
Supply and fixing GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Fixing only old serviceable GI tubing 15 mm bore, with and including new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
Taking up or down steel water tubing 20 mm bore from trenches/wall, ceiling or floors including all fittings complete all as specified and directed.
Supply and fixing GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Fixing only old serviceable GI tubing 20 mm bore with and including new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc not exceeding 10 cm width or girth complete all as specified and directed.
Supply and fixing in repair bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed.
Supply and fixing in repair 2 way Bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed.
Supply and fixing in repair chromium plated wall mixer three in one system for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
Supply and fixing in repair chromium plated centre hole wash basin mixer complete all as specified and directed.
Supply and fixing in repair 15 mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.
Supply and fixing in repair concealed stop cock with flange cast copper alloy, screwed down high pressure, with round operating knob for 15 mm bore pipe or for unions complete all as specified and directed.
Supply and fixing in repair stop valves/angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed.
Supply and fixing in repair 2 way angle valve 15mm dia cast copper alloy chromium plated, fancy type with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed.
Supply and fixing in repair Gun metal gate valve with iron wheel head screwed both ends for GI pipe 15mm bore complete all as specified and directed.
Supply and fixing in repair Gun metal gate valve with iron wheel head screwed both ends for GI pipe 20mm bore complete all as specified and directed.
Supply and fixing as in repair, brass chromium plated tubular towel rail 20 mm dia 60 cm long including brackets complete all as specified and directed.
Supply and fixing in repair towel ring brass chromium plated complete all as specified and directed.
Supply and fixing in repairs chromium plated swivel shower rose of size 150x150mm square type with accessories complete all as specified and directed.
Supply and fixing in repair chromium plated soap dish fixed to walls with brass screws complete all as specified and directed.
Supply and fixing in repair of chromium plated Health faucet with 15 mm bore 1mitre long tube acrylic type complete all as specified and directed.
Supply and fixing in repair Glass shelf with chromium plated guard complete all as specified and directed.
Supply and fixing in repair toilet paper holder chromium plated fixed to wall with chromium plated Brass screws complete all as specified and directed.
Supply and fixing in repair PVC connection pipe 15mm bore and 450mm long with PVC PTMT nuts at each end with rubber washers complete all as specified and directed.
Supply and fixing in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and fixing in repair stainless steel kitchen rack size 900mm X 900mm X 200mm complete all as specified and directed.
Supply and fixing in repair, 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and directed.
Supply and fixing in repair, 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and directed.
Supply and fixing vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap 15 mm bore chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe, PVC connection pipe complete all as specified and directed
Supply and fixing in repair 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and directed.
Supply and fixing in repair vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and directed.
Supply and fixing in repair Plastic water closet seat cover, black or white, closed pattern with flat bottom, and cover including mild steel chromium plated or aluminised hinging device complete all as specified and directed
Supply and fixing in repair chromium plated waste coupling 32mm (half or full thread) complete all as specified and directed.
Supply and fixing in repair 32mm dia PVC waste pipe complete all as specified and directed.
Supply and fixing in repair stainless steel Grating doom 100mm dia complete all as specified and directed.
Supply and fixing in repair stainless Steel Grating doom 125mm dia of complete all as specified and directed.
Supply and fixing in repair Stainless Steel Grating doom, 125mm dia with waste hole complete all as specified and directed.
Supply and fixing in repair 75 mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
Supply and fixing in repair 150 mm dia PVC (SWR) pipes, having, single socketed in any length with rubber ring joints laid in trenches as in waste / soil pipe complete all as specified and directed.
Supply and fixing in repair salt glazed stoneware drain pipes, 150 mm bore, laid in trenches and jointed complete all as specified and directed.
Supply and fixing in repair 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
Supply and fixing in repair 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste / soil pipe complete all as specified and directed.
Supply and fixing in repair 110 mm dia PVC (SWR) bends with access door any radius complete all as specified and directed.
Supply and fixing in repair 75 mm dia PVC (SWR) bends with access door any radius complete all as specified and directed.
Supply and fixing in repair 110 mm dia PVC (SWR) junction, single, (single T) equal or unequal provided with access door complete all as specified and directed.
Supply and fixing in repair 75 mm dia PVC (SWR) junction, single, (single T) equal or unequal provided with access door complete all as specified and directed
Material and labour for concrete bed in cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregates) for drain pipes, 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
Material and labour for loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage pits, soakage wells including taking out old borken brick bats and removing from site complete all as specified and directed.
Taking out carefully Precast RCC cover slab of septic tank, excavating and taking out sludge including foul water in a closed container by mechanical process or manual process, transporting to a distance exceeding 250 m but not exceeding 500 m and depositing the same in excavated earthen pit of sufficient size and depth in any type of soil within the defence land, where directed, returning, filling in earth into excavated pit after every disposal of sludge, cleaning inspection pit, sludge chamber inlet and outlet pipe, cleaning MS rungs and also applying one coat of linsed oil complete for septic tank capacity from 25 users to 500 users, cleaning the septic tank with fresh water complete all as specified and directed. Note : (i) Depth shall be measured after bailing out water from septic tank (ii) Cost of bailing out water is deemed to be included in the quoted rate.)
Taking out carefully the cover slab of each manhole of depth from 1.0 m to 2.0 metre and removing the sludge by mechanical process or manual process, transporting to a distance exc 250 m but not exceeding 500 m and depositing the same in excavated earthen pit of sufficient size and depth in any type of soil within the defence land where directed, including returning, filling of earth in excavated pit after every disposal of sludge and also applying one coat of linsed oil and cleaning with fresh water, placing the cover slab in position complete all as specified and directed.
Cleaning of blockage in sewage line/ pipe 100 mm dia / 150 mm dia manually and then with fresh water in between man holes and passing rubber ball of suitable size through line to ensure all blockage perfectly clear to the entire satisfaction of Engineer-In-Charge complete all as specified and directed.
Cleaning carefully the blokage of soil / waste pipe manually and then using fresh water of the blockage in CI / PVC Pipe 75 to 100 mm dia on walls and ensure all blockage perfectly cleared including necessary scafolding up to a height of 20.00 metre to the entire satisfaction of Engineer-in-Charge complete all as specified and as directed.
Taking out carefully the cover slab of gulley traps of any size and shape, depth and clearing the blockage by removing the sludge/any material to a distance exceeding 250m and not exceeding 500m and cleaning with fresh water placing the cover slab / Grating in position complete all as specified and directed
Cleaning / removal of blockage from Nahani trap, floor trap, gully trap, IWC, EWC including CI / PVC or any pipe complete all as specified and directed.
Material and labour for cutting holes into or through brick / block walls built in cement mortar and making good in cement mortar (1:3) or cement concrete (1:2:4) type B1 as required surface area not exceeding 150 sqcm complete all as specified and directed.
Material and labour for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/ specification from bottom to top: (i) Taking out old roof tratment and roughening tha same old concrete slab by picking, sweepingc clean and washing down with water to remove dust etc (ii) Screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying as in roof slab with mixing of WPC and surface finished fair and smooth without using extra cement (WPC shall be measured and paid separately) (iii) Cleaning the plastered roof surface and applying one coat of cold bituminuous primer @ 0.25 ltr/Sqm confirming to IS: 3384 -1986 (iv) APP based polymeric menbrane 3mm thick (minimum) weighing 3.5 kg/Sqm reinfiorced with polyster non woven fabric (weighing not less than 160gms/Sqm) shall be applied over bituminous primer as specified above over application of polymeric membrane by torch application method. The overlaps shall be minimum 100mm on the teransverese direction and 75mm on longitudinal direction
PART-III (EXTERNAL ELECTRIFICATION)
Material and labour for sand cushioning to underground cable for protection with fine river sand over, UG cable laid in trenches and gently punned to cushioning to cable complete all as specified and directed. (Note: Thickness of sand cushion shall be 150 mm thick below cable, 80 mm above the cable and punned down to a thickness of 180 mm which shall be measured and paid.)
Material and labour for Sub class ‘B’ old size well burnt brick laid flate in trenches over the cable for protection of LT cable complete all as specified and directed.
Material and labour for taking out old unserviceable UG cable of any size/ type from trenches/ wall/ roof etc. for necessary repair/ replacement/ re-laying works complete all as specified and directed . Note :- Excavation and earth work shall be measured and paid separately.
Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm 4 core laid in trenches /floor or fixed on wall/pole including brass compression cable glands, terminal lugs etc, complete all as specified and directed.
Material and labour for GI pipe light grade 40mm bore dia with all fittings to be laid in trenches or in floors, including taking down rusted one complete all as speciffied and directed.
Supply and fixing street light fitting of 60 Watt LED made of pressure die cast aluminium housing with toughned glass and LEDs with secondary optics and IP 66 protection and lens embedded PC Cover having top opening seperate driver compartment should have luminaire efficacy ≥110 lumens/ watt, CRI>70, PF > 0.95, CCT≥5500, IP66, impact resistance IK 07, inbuilt protection against lightning, over voltage, short circuit and surge/spike protection device upto 10 kV including taking out old unserviceable luminaire complete all as specified and directed. Note: (i) PVC insulated PVC sheathed, multistranded copper conductor cable of size 1.5 sqmmX 3 core from light fitting to Street light feeder deemed to be included in quoted rate.
Supply and fixing LED street light of capacity 70 Watt made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver should have luminaire efficacy ≥110 lumens/ watt, CRI>70, PF > 0.95, CCT≥5500, IP66, impact resistance IK 07, inbuilt protection against lightning, over voltage, short circuit and surge/spike protection device upto 10 kV including taking out old unserviceable luminare complete all as specified and directed.
Dismantling unserviceable steel poles of any size including demolition of foundation concrete & removing from site complete all as specified and directed.
Material and labour for erection of steel tubular swaged pole type 410 SP - 31 (9.00 metres long) including cast iron base plate, finial taper plug and and painted with two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed. Note:- PCC in foundation and coping shall be measured and paid separately under relevent items.
Material and labour for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in foundation complete all as specified and directed.
Material and labour for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregates) as in coping to the new/ existing Steel Poles complete all as specified and directed.
PART-IV (EXTERNAL WATER SUPPLY)
Taking up or down steel tubing /GI tube of size 50mm bore and connections including cleaning for refixing or deposited to store for further disposal complete all as specified and directed.
Taking up or down steel tubing /GI tube of size 25mm bore and connections including cleaning for refixing or deposited to store for further disposal complete all as specified and directed.
Taking up or down steel tubing /GI tube of size 15mm bore and connections including cleaning for refixing or deposited to store for further disposal complete all as specified and directed.
Taking up or down steel tubing /GI tube of size 20mm bore and connections including cleaning for refixing or deposited to store for further disposal complete all as specified and directed.
Supply and fixing steel tubes medium grade galvanised 50 mm bore with all fittings laid in trenches complete all as specified and directed.
Supply and fixing steel tubes medium grade galvanised 25 mm bore with all fittings laid in trenches complete all as specified and directed.
Supply and fixing steel tubes medium grade galvanised 20 mm bore with all fittings laid in trenches complete all as specified and directed
Supply and fixing steel tubes medium grade galvanised 20 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed
Supply and fixing steel tubes medium grade galvanised 15 mm bore with all fittings laid in trenches complete all as specified and directed.
Supply and fixing steel tubes medium grade galvanised 15 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Taking down old unserviceable valve and Supply and fixing in repair Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed 50 mm bore complete all as specified and directed.
Taking down old unserviceable valve and Supply and fixing in repair Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed 20 mm bore complete all as specified and directed.
Supply and fix Straight plain brass ferrules 20mm (or connecting screws) screwed both ends and fixed complete all as specified and directed
Supply and fixing in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe of size 15 mm bore and fixed. (Minimum weight 15mm-90gms/ 20mm-125gms) complete all as specified and directed.
Supply and fixing in repair ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete of size 15mm complete all as specified and directed.
Supply and fixing in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete of size 20mm complete all as specified and directed.
PART-V (INTERNAL ELECTRIFICATION)
Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point including all fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
Taking down ceiling/ exhaust/ wall fan including connection wires carefully, removal to store in safe custody and refixing the same in original position after repairing (rewinding if require), painting with synthetic enamel paint by spraying including filling cavity including changing the hook, clamp, pipe for ceiling fan as per requirement of site complete all as specified and directed.
Material and labour for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FRLSH cable, 1100 volts grade IS -694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm FRLSH cable (incl connecting to earth dolly) laid/ fixed in surface casing capping and also including sunk type PVC terminal box and 3 mm thick plastic laminated sheet top covers for One light/fan/exhaust fan point controlled by one number one way 5 Amp switch complete all as specified and directed.
All as per item serial Item No 5.003 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches complete all as specified and directed.
All as per item serial Item No 5.003 here-in-before but One socket outlet 3 pin 6 Amp on independent board complete all as specified and directed.
All as per item serial Item No 5.003 here-in-before but One bell/ buzzer point controlled by one push button on the independent board complete all as specified and directed.
All as per item serial No 5.003 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable complete all as specified and directed.
Supply and fixing in repair switch modular type 6 Amp 240 Volts single one way (ISI marked) complete all as specified and directed.
Supply and fixing in repair modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed.
Supply and fixing in repair modular switch 1 way 16 amp, 1 module complete all as specified and as directed.
Supply and fixing in repair modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed.
Supply and fixing ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed
Supply and fixing lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
Supply and fixing in repair modular fan regulator, 120 W, 2 module complete all as specified and as directed.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED light fitting 15W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing exhaust fan, steel body AC single Phase, 230V of size 300m sweep with blades, frame and louvers including taking down old fan complete all as specified and directed. Note : Old exhaust fan to be deposited in store for further disposal.
Supply and fixing in repair MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 (using 20 mm graded stone aggregates) complete all as specified and directed.
Supply and fixing in repair MCB DB of sheet metal enclosure double door SPN 8 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 (using 20 mm graded stone aggregates) complete all as specified and directed.
Supply and fixing MCCB four pole 100A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and directed.
Supply and fixing in repair MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA, C-series marked complete all as specified and directed.
Supply and fixing in repair MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA, C-series marked complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) including taking down old fan complete all as specified and directed. Note : Old ceiling fan to be deposited in store for further disposal.
Material and labour for Sub main wiring with 2 runs of 4.0 sqmm, single core, FRLSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FRLSH PVC insulated & unsheathed copper conductor as continuos earth wire connecting from dolly to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring any type of conduit complete all as specified and directed. Note: 2 run of 4 Sqmm cable + 1 run of 4 Sqmm earthed cable + 1 run of conduit altogether shall be measured as one unit.
Material and labour for Sub main wiring with 2 runs of 2.5 sqmm, single core, FRLSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 2.5 sqmm single core FRLSH PVC insulated & unsheathed copper conductor as continuos earth wire connecting from dolly to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring any type of conduit complete all as specified and directed. Note: 2 run of 2.5 Sqmm cable + 1 run of 2.5 Sqmm earthed cable + 1 run of conduit altogether shall be measured as one unit.
M&L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I, 2009
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing Modular Bell push 6A 1 module complete all as specified and directed.
Supply and fixing Buzzer, Ding Dong AC, 230 volts, single pole complete all as specified and directed.
Supply and fixing of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps complete all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Material and labour for building secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed.
PART-VI (FURNITURE) REPAIRS TO BED HARD TOP STEEL (DRG NO. FD/MAP/E6/08(R)
Removing the unserviceable plywood from Bed Hard and tightening all legs, long rails and short rails of Bed Hard top Steel complete all as specified and directed.
Removing the old welding spots from broken welding joints and re-welding in the same place as required. Thereafter preparation of old surface by sand paper No 50 and wire brush and apply one coat of synthetic enamel paint in Black colour over a coat of red oxide primer complete all as specified and directed.
Supply and fixing new 12 mm thick BWR plywood top alongwith 06 Nos Countersunk screws and washers on three stiffeners all as shown on Drg and as specified and directed.
Removing the existing unserviceable shoes and S&F new PVC shoes in legs of Bed Hard as per existing pattern complete all as specified and directed.
REPAIRS TO CHAIR VERANDAH (DRG NO. FD-359 & 256)
Removing the existing unserviceable/ plastic cane, re-canning of chairs verandah with 4 mm wide 0.5mm thick plastic cane complete all as specified and shown on drg.
M&L for Preparing the existing steel surfaces and panting with two coats of white synthetic enamel paint and providing new plastic shoes for chair verandah & inclidung taking down old shoes complete all as specified and shown on Drg.
TABLE COMPUTER (DRG NO. FD/E6/MAP/03)
Removing the existing TOP of table computer 3'x2' and S&F new top of size 900mmx600mm x18 mm thick prelaminated MDF board exterior grade both side decorative with standard PVC edging around as per drg and as specified and directed.
Removing the existing any kind of unserviceable MDF Board Shelf and S&F new shelf of size 725x300mm made out of 18 mm thick Both side prelaminated MDF board exterior grade both side beige colour as per existing with standard PVC edging around as per drg and as specified and directed.
Removing the existing any kind of unserviceable MDF Board Shelf and S&F new shelf of size 480x300mm made out of 18 mm thick Both side prelaminated MDF board exterior grade both side beige colour as per existing with standard PVC edging around as per drg and as specified and directed.
Removing unserviceable existing keyboard tray of table computer and Supply and Fix new key board tray of size 480mm x 450mm duly covered with PVC edging and one set of telescopic channel of size 300mm as per drg and as specified and directed.
Removing unserviceable drawers of table computer and Supply and fixing new drawer of size as following:- (a) Front made of PLMDF Board Ext Gde of size 230x130mm (b) Sides made of PLMDF Board Ext Gde 300mmx90mm (c) Telescopic channels two in Nos 300mm long (d) Bottom made of computer PLMDF Board Ext Gde 300mmx175 mm (d) Drawer End of size 140mm x 90mm PLMDF Board Ext Gde
Material and labour for welding of thickness not exceeding 6mm and length not exceeding 2.5cm on frame of Table computer by gas welding wherever required complete all as specified and directed.
REPAIRS TO CHAIR COMPUTER (DRG NO. FD/E6/MAP/01)
Dismantling existing unserviceable PVC arm rest and Supply and fixing new PVC arm rest of best quality 01 No, one piece arm rest of size 24 cm x 6.4 cm x 3.3 cm shall be made out of polyurethane 76-85 shore ‘A’ Hardness and reinforced with MS insert scratch and weather resistant all as specified and directed.
Dismantling existing unserviceable seat of chair computer and Supply and fixing new seat 75 mm thick polyurethane foam moulded with density 50-55 kg per cubic mtr hardness duly covered with tapesry cloth not less than 250/- per RM all as specified and directed.
Dismantling existing unserviceable back of chair computer and Supply and fixing new back 50 mm thick polyurethane foam moulded with density 50-55 kg per cubic mtr hardness duly covered with tapesry cloth not less than 250/- per RM all as specified and directed.
Removing of unserviceable pedestal assy of chair computer and Supply and fixing of new pedestal assy of 600mm pitch centre dia complete all as specified and directed.
Removing unserviceable caster wheels of chair computer and Supply and fixing new caster wheels of chair computer complete all as specified and directed.
REPAIR TO CHAIR DINNING CUSHIONED (DRG NO. FD/MAP-11/04)
Removing the existing worn out seat cushion and S&F new PU foam seat foam of size 450X450X75mm thick, with 12 mm thick plywood BWR grade phenol bonded covered with tapestry cloth for chair dining cushioned complete all as specified and shown on drawing. (Tapestry cloth shall be approved by GE)
M&L for Preparation of surfaces and french polishing to wooden surfaces for repaired chairs and applying two or more coat French polish on new surfaces and one coat on old surfaces to match uniform shade complete all as specified and shown on drg.
REPAIR TO TABLE CENTRE/PEG TABLE/TEAPOY
Removing the existing unserviceable top table centre and S&F new top made out of 18 mm thick pre laminated MDF board exterior grade duly edging with 6mm thick beading including French polishing to wooden surface to match the existing surfaces of repaired table centre apply one coat French polish on new surfaces and one coat on old surfaces to match uniform shade complete all as specified and shown on drawing. (Drg No. FD-274)
All as per item Ser No 11.001 here-in-before but top of Peg Table. (Drg No. FD-277 & FD-384)
All as per item Ser No 11.001 here-in-before but top of Teapoy. (Drg No. FD-382)
REPAIRS TO SOFA SET 4/5 SEATER (DRG NO. FD-281)
Replacement of existing foam cushions of Sofa set 04/05 seater including existing tapestry cloth of sofa set 4/5 seater, and supply & fix new PU Moulded Foam 32 kg per cubic meter density of size 560 x 535 x 100mm thick, duly stitched with tapestry cloth and closed with valcrow of suitable size complete all as directed and shown on drg . Make: Sleepwell, Kurlon or equivalent as approved by GE Note: (Tapestry cloth shall not be less than Rs. 450.00 Per RM).
Replacement of tapestry cloth of cushions of sofa set 4/5 seater, seat and back and supply & fix new tapestry cloth for size 560 x 535 x 100mm thick on existing foam cushion with valcrow on one edge of best quality. The cost of tapestry cloth to be not less than Rs 450/- per meter.
Removing unserviceable long rail of front or back side of three seater sofa set and supply and fix new long rail made out of first class Hard Wood of size 1590x100x35mm duly french polished complete all as specified and as shown on drgs.
Removing unserviceable short rail of any side of sofa set 4/5 seater and supply and fix new short rail made out of first class Hard Wood of size 525x100x35mm duly french polished complete all as specified and as shown on drgs.
Removing unserviceable wooden bearers of any side of sofa set 4/5 seater and supply and fix new wooden bearers made out of first class Hard Wood of size 525x40x40mm duly french polished complete all as specified and as shown on drgs.
Removing unserviceable wooden Arms of any side of sofa set 4/5 seater and supply and fix new wooden Arms made out of first class Hard Wood of size 525x40x40mm duly french polished complete all as specified and as shown on drgs.
Material and Labour for smoothening surface with sand paper of Sofa set five seater for repolshing the old polished surface or unpolished surface of sofa with one coat of french polish both above and below the sofa complete all as specified and directed.
REPAIRS TO ALMIRAH STEEL LARGE WITH SHELF/ALMIRAH STEEL 1/2HX1/2S AND ALMIRAH MEDIUM (DRG NO. FD-67M, FD-350, FD-351, FD-1031 & FD-1032)
Replacement of existing unserviceable handle by providing new Mild Steel chromium plated handle of standard size including nuts and washers of Almirah large/medium steel best quality as approved all as specified and directed.
Supply and fixing new 75mm 6 lever lock with brass levers & stainless steel keys in duplicate fixed with suitable screws, welding as required for Almirah large/Almirah 1/2Hx1/2S and Almirah Medium steel incl removing the existing unserviceable lock. Make: Godrej/Harrison/Link
Supply and fixing new steel cleats for supporting shelves in Almirah large/Almirah 1/2Hx1/2S and Almirah medium steel including removing the existing unserviceable cleats complete all as specified and directed.
Removing unserviceable 3 way locking device from Alimarh large steel and fixing new locking device complete all as specified and directed.
All as per item No 13.004 here-in-above but of Almirah medium steel complete all as specified and directed.
Material and labour for welding of thickness not exceeding 6mm and length not exceeding 2.5cm foot rest of Almirah large steel by gas welding wherever required complete all as specified and directed.
Preparation of old painted surfaces of Almirah large steel internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush. Applying putty on the patch and rubbing with sand paper No 150 to make surface even. Thereafter applying one coat of red oxide primer and applying one coat synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing.
All as per item No 13.007 here-in-before but for Almirah medium steel complete all as specified and directed.
All as per item No 13.007 here-in-before but for Almirah steel1/2 Hx1/2S complete all as specified and directed.
Rana Kr Phookan
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .