SPECIAL REPAIRS FOR REPLACEMENT OF CFL STREET LIGHT FITTINGS WITH ENERGY SAVING LED STREET LIGHT FITTINGS AND OTHER CONNECTED ITEMS AT MILITARY STATION FAZILKA AND PROVISION OF 10 KVA GROUP CONTROL SMART STREET LIGHT AT MILITARY STATION ABOHAR( 2ND C

Amount

Taking out different size of XLPE cable complete all as specified and directed by Engineer-in-Charge

Supply, laying, jointing and testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric cable (heavy duty) with stranded aluminium conductors, 1100 volts grade of size 4 core 10 sqmm all as specified and directed by Engr-in-Charge Make : Havells / paragon / Finolex

Supply, laying, jointing and testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric cable (heavy duty) with stranded aluminium conductors, 1100 volts grade of size 4 core 25 sqmm all as specified and directed by Engr-in-Charge Make : Havells / paragon / Finolex

Supply, laying, jointing and testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric cable (heavy duty) with stranded aluminium conductors, 1100 volts grade of size 4 core 6 sqmm all as specified and directed by Engr-in-Charge Make : Havells / paragon / Finolex

Supply, laying burnt bricks sub class 'B' old size for cable protection laid length wise prependicular to the axis of cable complete all as specified and directed by Engineer-in-Charge.

M&L for sand cushioning for underground cable using fine sand 8cm before laying cable and 15cm after laying and punned to 18cm after laying of cable complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations of poles, struts, stays etc. or laying underground cable etc. in soft/loose soil, & getting out complete all as specified and directed by Engineer-in-Charge.

Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified & directed by Engineer-in-charge.

Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge .

Dismantling and taking down CFL / Fluorescent Tube Light Single / Double of any wattage or size street light fittings for replacement with LED Street Light fittings components complete all as specified and directed by Engineer-in-Charge

S&F LED street light fittings 25 Watt IP 66 aluminium housing in grey finish with clear acrylic and cast aluminium pipe mounting attachment including external SPD of capacity 8 KV complete all as specified and directed by Engineer-in-Charge Make : Bajaj / Syska Cat Part No. SSK-ST-25W-1 or equivalent to Havells / Philips

S&F LED street light fittings 60 Watt IP 66 aluminium housing in grey finish with clear acrylic and cast aluminium pipe mounting attachment including external SPD of capacity 8 KV complete all as specified and directed by Engineer-in-Charge Make : Bajaj Cat Part No. BRTFG 60W LED / Syska Cat Part No. SSK-SLF-CF-60-WL or equivalent to Havells / Philips

S&F LED Flood light fittings 1 x 200 Watt IP 66 aluminium housing in grey finish with clear acrylic fixed on FI clamps fabricated out of 40mm x 6mm with nuts, bolts, washers complete with PCC Work, complete all as specified and directed by Engineer-in-Charge Make : Bajaj / Syska Cat part No. SSK-BLE-200W or equivalent to Havells / Philips

Junction box with fuse provision and suitable connection for three phase incomming cable 3 phase out going cable and single phase connection for light fitting with controlled MCB SP-6 Amps-01 No. enclosed in thermo plastic in closed shock proof safe complete all as specified and directed by Engineer-in-Charge Make : Hensel / Sintex

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 Mtr below ground level with top edge of earth plate at a depth not less than 1.5 Mtr below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized iron earth lead wire 4mm dia (8 SWG) by means of bolts, nuts and washers of galvanized iron or steel and thimbles upto equipment and other end of the earth wire connected to earthing test point and protected by galvanized iron pipe light grade 20mm dia upto earthing test point / equipment fixed with 2 Nos. of mold steel clamps made out of 25mm x 3mm flat iron and preforated water pipe 20mm dia galvanized iron pipe heavy grade 2.25 Mtr long and top with socket and plug and bottom connected to earth plate by silt and two bolts / nuts / washers complete with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C-1 and cast iron cover with frame all as shown on electrical plate No. 3 of MES Schedule Part - I of SSR-2009 complete all as specified and directed by Engineer-in-Charge. Note : (i) Outer edge of earth pit will be 1 Mtr away from the outer edge of PCC Chamber. (ii) Galvanized iron earth wire 4mm dia upto earthing test point / equipment is encluded in this item. (iii) Water pipe shall be provided in slainting position. (iv) 20mm dia galvanized iron pipe for watering shall be provided with a socket and plug and shall be 10cm above the ground level.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized iron strip 32mm x 6mm thick as earth lead by means of bolts, nuts and washers of galvanised iron or steel and thimbles and other end of the earth strip connected to earthing test point/equipment and protected by galvanised iron pipe light grade 40mm dia upto earthing test point/equipment fixed with 2 Nos of mild steel clamp made out 25mm x 3mm flat iron and perforated water pipe 20mm dia GI medium grade and top with socket & plug and bottom connected to earth plate by slit and two bolts/nuts/washers, PCC chamber in cement concrete (1:2:4) type B-1 and CI cover with MS angle iron frame all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Note:- (i) Outer edge of earth pit shall be 1.5 metre away from the outer edge of PCC chamber. (ii) GI strip upto earth test point/equipment is included in this item. (iii) Water pipe upto earth pit included in item shall be provided in slantling position.

M&L for plain cement concrete 1:2:4 type B1 using 20mm graded store aggregate in curbs / coping / bed plates including weathering, slightly rounded or champhered angles with necessary formwork for pipe support, finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation of poles / struts etc. complte all as specified and directed by Engineer-in-Charge.

S&F PVC cable of size 1.5 Sqmm 3 core for street light from junctionbox to street light complete all as specified and directed by Engineer-in-Charge

Supplying and laying GI tubing light grade 80mm bore including specials for cable protection complete all as specified and directed by Engineer-in-Charge

Supplying and laying GI tubing light grade 50mm bore including specials for cable protection complete all as specified and directed by Engineer-in-Charge

Supplying and laying GI tubing light grade 40mm bore including specials for cable protection complete all as specified and directed by Engineer-in-Charge

M&L cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold / hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one coat of primer, one under coat and one finishing coat of paint complete all as specified and directed by Engineer-in-Charge.

S&F LT Panel for street light group control management system 10 KVA with approved Globle System for mobile communication Gateway (2G / 3G Gateway) and poly cloud based CCMS (For maximum 100 Nos. of street lights) complete all as specified and directed by Engineer-in-Charge. Note : (a) 2G / 3G SIM shall be provided by manufacturer. (b) Monthly data charge will be borne by manufacturer. ----------------------------------------------------------------------------------------------- Note : A sum of Rs. 1,69,800.00 will be deducted on account of credit for dismantled / demolished / taken down material. Please refer details on Srl Page No. 22 (Schedule of Credit) of Tender documents

Singla Electricals

M/S RAJESH KUMAR and CO.

AABIA CONSTRUCTION

Vee Vee Enterprises