Maintenance work

Repairing damaged Terrace tile area & Wall surface with waterproofing elastomeric coat by removing all existing paint, putty and Loose plaster over wall, clean surface preparation with metal brush & putty blade also complete touch up work with pop mixing with SBR Chemical. For walls & Terrace with SBR (Styrene Butadiene Rubber) / Acrylic primer added to the cement with 1:1.5 ratio apply one coats as a protection coating & to make the surface strong. Followed by two coat of elastomeric water proofing coating. The rate including labour charges, SBR/ Acrylic primer, Elastomeric, POP and scaffolding etc., complete complying with standard specification and as directed by the departmental Officers at site of work.

Supply and installation of three-track sliding UPVC windows shall utilize UPVC profile sections with an outer wall thickness of 2.30mm (±0.2mm), featuring an outer frame of 112mm x 52mm x 112mm, a shutter of 66mm x 42mm x 50mm, an interlock of 45mm x 36mm, and a glazing bead of 24.5mm x 16mm. All profiles of frames, sash, and mullion shall be reinforced, wherever required, with a 1mm thick GI steel section. Each window is to be equipped with various security devices, such as touch locks or crescent locks, along with nylon rollers and an aluminium track for smooth operation, all supplied as per requirements, compliant with relevant specifications, and as directed by departmental personnel. The windows shall incorporate 5mm thick Plain or Pinhead glass, held securely by TPE (Grey) weather-sealed gaskets. All corners and mullion joints of the frame and sash are to be mitred cut and fusion welded without any mechanical joints, with all welded joints neatly trimmed and finished with a grooved nib to ensure the final products are free from sharp edges. The complete window units shall be fixed into pre-finished openings by drilling and fastening through the outer frame using high- quality fasteners, and silicon sealant will be applied to fill the gap between the wall and window frame for a leak-proof installation and complete finish etc., Complete and as directed by the department officers.

Collecting the scattered debries using tipper machinery from work spot and loading into the tipper lorry and conveying away the same to outside by lorry to a lead of 3km entirely with in city limit including loading and unloading charges and dumping in low places and levelling neatly etc., complete complying with standard specification and as directed by the departmental officers. (200 cft volume capacity)

Please Enable Macros to View BoQ information