SPECIAL REPAIR TO SECURITY WALL AT RATNUCHAK UNDER GE KALUCHAK

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for) and removing unserviceable material outside defence area, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material outside defence area, complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Demolition of brick work or stone / boulder masonary built in cement mortar including all quoins arches pillars etc, complete all as specified & directed.

Brick work in cement mortar 1: 4, using sub class ‘B’ bricks, straight or curved on plan exc. 6m mean radius complete all as specified & directed.

Description all as per item No.5 above, but except bricks, complete all as specified and directed.

Dismantling of barbed wire of any gauge,thickness etc complete all as specified and directed

PCC 1:2:4, nominal mix, type B-0, using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Reinforced cement concrete (Design mix) M-25 using 20 mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.

Formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs,etc.also splays between floors and beams, etc. for rough finished surface of concrete, complete all as specified.

TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified and directed.

All as per item No 11 above but 5 to 10 mm dia as in stirrups, spacer etc, complete all as specified and directed.

Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note:-(Each line wire to be measured)

Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Mild steel framed works such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming toFe.290.Gde-E-165 complete all as specified and directed.

Rendering 15 mm thick plaster in CM 1:4 on fair faces of brick work or concrete surfaces & finished the surfaces even and smooth without using extra cement, complete all as specified and directed.

Rendering 15 mm thick plaster in cement mortar 1: 4 on other than fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified & directed.

Applying two coats of cement base paint over and including one coat of primer on walls including preparation of new plastered or un-plastered surfaces of wall, complete all as specified.

Applying two coats of synthetic enamel paint over a coat of red oxide primer to new or previously untreated steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed.

M/S GHUMAN BUILDERS

A S CONSTRUCTION

M/S Sudagar Mal

M/S ANKUSH GUPTA

Hare krishna engineering const.

Warne Builders

M/S ARUN ANAND

NARESH KUMAR AND COMPANY

N S MANHAS

M/S PARAMJEET SINGH