REPAIR OF STATIC WATER TANK, FIRING RANGE, FENCING, PAINTING IN CAMOUFLAGE PATTERN AND OTHER ALLIED MISC WORK UNDER IN TECHNICAL AREA AT GE(AF) SRINAGAR

Amount

Deployment of manpower & tools / machinery etc for Cleaning of RCC static water tank of capacity 15,000.00 gallon by dewatering and removing sludge, mud or any other foreign material from the bottom and internal surface of tank by wire brushing, cleaning with fresh water, bailing out complete water with pump sets, washing of internal surface with sufficient quantity of water & bleaching powder (0.10 Kg of bleaching powder will be mix in 1 litre water), writing the date of cleaning and capacity of tank with white synthetic enamel paint on black background with synthetic enamel paint complete all as directed by Engineer-in-charge.

Deployment of manpower & tools / machinery etc for Cleaning of RCC static water tank of capacity 25,000.00 gallon by dewatering and removing sludge, mud or any other foreign material from the bottom and internal surface of tank by wire brushing, cleaning with fresh water, bailing out complete water with pump sets, washing of internal surface with sufficient quantity of water & bleaching powder (0.10 Kg of bleaching powder will be mix in 1 litre water), writing the date of cleaning and capacity of tank with white synthetic enamel paint on black background with synthetic enamel paint complete all as directed by Engineer-in-charge.

Deployment of manpower & tools / machinery etc for Cleaning of RCC static water tank of capacity 50,000.00 gallon by dewatering and removing sludge, mud or any other foreign material from the bottom and internal surface of tank by wire brushing, cleaning with fresh water, bailing out complete water with pump sets, washing of internal surface with sufficient quantity of water & bleaching powder (0.10 Kg of bleaching powder will be mix in 1 litre water), writing the date of cleaning and capacity of tank with white synthetic enamel paint on black background with synthetic enamel paint complete all as directed by Engineer-in-charge.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.

M&L for Brick work with sub class 'B" (using old size bricks) straight or curved of on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.

M&L for brick work with sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and as directed.

All as per item No 6.00 above here-in-before but except bricks. Note:- Old brick retrieved vide item No 4.00 above shall be reused.

Taking down cement plaster of any description on brick or stone masonary wall , etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified.

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement and mixing only integral water proofing compound as per manufacturer instruction complete all as specified and as directed by Engineer-in-Charge. Note:- WPC will be measured and paid seperately.

Supply only integral water proofing compound.

M&L for repairing SWT mild steel framed cover by cutting / dismentling old corroded portion and supply & fix new Mild steel angle, T section, flat etc of suitable size including welding old member to new member using steel section conforming to Fe-290, Gde-E-165, all as specified.

Demolition of cement concrete (unreinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified.

M&L for 100 mm thick PCC 1:2:4 type B2, using 40 mm graded stone aggregate as in floor laid in alternate bay finished even and smooth without using extra cement.

M&L for 75 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection laid in bays n. exc. 2 sqm each, finishing the surface of concrete topping even & fair, without using extra cement filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight) complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment from internal surface static water tank and applying three coats of white wash complete old treatment in static water tank complete all as spfd.

S&F in repair tee hinges 150 mm size heavy duty welding to steel cover of any descreption complete.

M&L in repair Welded steel wire mesh of any size welded to steel frame work of static water tank complete all as specified & directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M & L for preparation of old painted steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint in any pattern complete.

Supply and fixed in repair galvanised 2 strend steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of strails straining bolt including securing or tying at crossing with and provn of galvanised mild steel wire staple or steel pins etc complete all as specified as directed.

Excavating in post holes, in soft / loose soil, (or similar holes) each n. exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surfaces complete all as specified.

M&L for cement concrete type C-2 1:3:6(40mm Grade aggregate) as in foundation,filling /sub base and mass concrete complete all as specified .

Dismantling RCC posts or struts of any section, including taking out embedded portion in concrete or brick work of any position place including swan neck fencing post and making good to disturbed portion all as specified.

Dismantling chain link fencing fixed with steel or wood fillets, of any type complete all as specified

Supply only chain link fencing 4 mm dia galvanized steel wire aparure of size as directed, made up into mattresses or cages lapped wired conforming to IS 2721 all as specified & directed. Note:- Fixing only fencing will be measured and paid separately.

Fixing only chain link fencing of description fixed to steel post with mild steel flat & nut bolt etc. Note: (i) Supply only fencing, will be measured and paid separately. (ii) Supply and fix mild steel nut bolt, line wire and flat will be measured and paid separately.

M&L for mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Supply and fix 8 mm dia mild steel round bar as in line wire for chain link fencing fixed with GI wire including applying two coats aluminium paint over one coat red oxide primer after preparation of surfaces all as directed.

Demolition of reinforced cement concrete (reinforement cut as required to facilitate demolition) of culvert slab and similar suspended work and removing form site all as specified and directed.

M&L for RCC 1:2:4 (nominal mix) Type B1 using 20 mm graded stone aggregate in slabs of culvert supported on walls, beams etc and the like complete.

M&L for form work to soffits of flat, fair finished surfaces of concrete of suspended culvert slabs not exceeding 200 mm thick (Horizontal or sloping)

M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape including cranking bending spirallay for hooping for columns hooking end and binding with and including mild steel wire (annelead) not less than 0.9mm dia or scuring with clips.

M&L for cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping and the like, weathering, slightly rounded or chamfered angles including necessary form work complete.

M&L for PCC 1:3:6 type C-0, using 12.5 mm graded stone aggregate) as in bed of drain complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and pointed in any mortar, all as specified.

M&L for screed bed or bedding layers of 15 mm thick for laying floors in CM 1:4 complete all as specified.

M&L for rubbur molded glossy finish Chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick, in white cement with pigment, set, jointed in neat cement slurry & pointed in coloured cement, as in floors / path / hardstanding, laid over screed bed complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8, type D-2,(using 40 mm graded stone aggregate) as in Sub base for path / flooring complete all as specified and as directed.

M&L for sand cushioning over PCC surfaces, for laying of interlocking tiles, spread rolled and consolidated to gradient as required.

Material & Labour for machine pressed precast concrete interlocking paver block of approved shape and size of 80 mm thickness, with minimum compressive strength of 40 N / Sqmm (M-40 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with white cement and pigment laid in path / hardstanding complete Note:- Sand screed will be measured & paid seperatly.

Removal of soft loose soil / sand etc from embankments height not exceeding 1.5 metre from Ground level complete all as specified & directed.

Removal of soft loose soil / sand etc from embankments height exceeding 1.5 metre but not exceeding 3.00 meter from Ground level complete all as specified & directed.

Loose filling of soft loose soil / sand in Firing range using soil removed vide item No 42 & 43 above including breaking of soil boulder in to small peice, height of filling not exceeding 1.5 metre above the ground level completed all as specified and diirected by Engineering-in Charge.

All as per Item No 44 above but height exceeding 1.5 metre but not exceeding 3.0 metre fromground level

M&L for Loose filling of clean and dry sand in Firing range, height of filling not exceeding 1.5 metre above the ground level completed all as specified and diirected by Engineering-in Charge.

M&L for Loose filling of clean and dry sand in Firing range, height of filling exceeding 1.5 metre but not exceeding 3.00 metre above the ground level completed all as specified and diirected by Engineering-in Charge.

Supply only dry clean River Bed Sand

Supply only 20 mm graded crushed stone aggergate

Supply only 40 mm graded crushed stone aggergate

Supply only 63 mm graded crushed stone aggergate

Supply only 80 mm graded crushed stone aggergate

Complete removal of exsting treatment from wall surface including pilister & cornice etc of any descreption including cleaning brooming down or with steel wire brushing, scrapping down smooke soot, moulds, moss and efflorescent salts etc complete all as specified and as directed.

M&L for preparation of new plastered surface / surface obtained after complete removal of treatment and application of water based primer sutable for weather proof exterior emulsion paint, applied as per manufacturer instruction on wall surface including pilister & cornice etc of any descreption complete. Note:- This item will be executed over new plaster surface / surfcae obtained after complete removal of existing treatment.

M&L for application of two coats of exterior emulsion paint in camouflage pattern applied as per manufacturer instruction on primered surface of wall including pilister & cornice etc of any descreption complete. Note:- Application of primer will be measured & paid seperatly.

M&L for application of two coats of exterior emulsion paint applied as per manufacturer instruction on primered surface of wall including pilister & cornice etc of any descreption complete. Note:- Application of primer will be measured & paid seperatly.

M&L for preparation of old painted surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying one coat of cement base paint, colour and tint as ordered in camouflage pattern, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old painted surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying one coat of weather proof exterior emulsion paint, colour and tint as ordered in camouflage pattern, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint including filling of holes with putty mixed with same shade of paint, complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-in-Charge

Dismantling of Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings including ridges, hips, valleys and flashings etc complete all as specified and as directed by Engineer-in-Charge. Note:- (i) The rate quoted shall also be deemed to include for taking down of wind ties.

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete.

All as per item No 62 but except Sheets using sheet retrived vide item No 61 above Note For Item No 62 & 63:- Quoted Rates shall be deem to include for Fixing only Wind Tie retrived from BOQ Item No 61

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

M&L for Preparation of new zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, by coating with mordant solution including washing and cleaning, etc and applying two coat of synthetic enamel paint over one coat red oxide primer in camouflage pattern complete all as specified and directed by Engineer-in-Charge

FG CONSTRUCTION

M/S Abdul Ahad Rather

M/S MIR AND CO

M/s PARVAZ CONSTRUCTION COMPANY

M/S WANI AND SONS

M/S Thakur & Sons

M/S FAROOQ AND SONS