REPAIR/ REPLACEMENT OF ROOF/CHAJJA PLASTER TANK PLATFORM APP MEMBRANE AC SHEET GALVALUME SHEET AND ALLIED WORKS IN N-1 NAIR KULDEEP POWER HOUSE SARRANG AUDITORIUM 3 ASC SWIMMING POOL AREA AT AFS CHAKERI KANPUR

Amount

M&L rendering in CM 1:6 to patches of damaged/loose portion of external surfaces of wall not exceeding 1.00 Sqm including preparing and removing/taking down existing loose portion of plastering surfaces and matching with exisisting finished surfaces by providing two coats of cement based paint over primer complete all as specfied and directed . Note: The repair shall be done upto 2nd floor and the cost of scaffolding shall be deemed to included in quoted rate.

All as per item No 1.00 here-in-before but in CM 1:4 to internal surfaces of wall by providing two coats of oil emulsion distmper over and including 2.00 mm thick wall care putty over a coat of primer complete all as specified and directed.

M&L rendering in CM 1:3 to patches of damaged/loose portion of ceiling surfaces of wall not exceeding 1.00 Sqm including preparing and removing/taking down existing loose portion of plastering surfaces and matching with exisiting finished by providing three coats of white wash complete all as specfied and directed .

M&L for filling the gaps of joints of tiles/granting/WHB or any other similar article by applying Birla white cement complete all as specified and directed by the Engr-in- charge.

Dismantling of AC sheet corrugated /semi corrugated as in roof covering complete all as specified and directed.

M&L for 6mm thick AC corrugated or semi corrugated sheet in roof covering etc fixed with `L' type or `J' type or cranked hooks including washer etc complete all as specified and as directed.

Ditto as per item No 6.00 above but except sheet.

Dismantling timber scantling, unframed, 40 sq cm and over in section in any position complete all as specified and directed

M&L for rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to comman rafters and running rails and guided for sliding doors, frame work for chajjas/rain gaurd, fixed with angle cleats or other connecting plaste including cutting, welding etc Fe-410-W (Gde-E-250) quality 'A' complete all as specified and directed.

Supply and fixing for coloured galvalume profile sheet in roofing shall be with feed material manufactured from 0.50 mm (minimum) base metal thickness (BMT), minimum 550 Mpa yield strength and shall confirm to physical specifications of ASTM-792 or equivalent, colour coated galvalume sheet shall have maximum pitch of 250 mm C/C and minimum 28 mm crest depth in lenght as per site requirement. The steel sheet shall be coated with hot dip metallic, aluminium Zinc alloy (55% Aluminium, 43.5% Zink, 1.5% silicon) coating AZ 150 as 150 gm/Sqm total on both sides. The contractor shall submit manufacturer test certificates for the chemical and mechanical properties, confirming genuinity of material including base metal thickness must be submitted for approval to GE prior to the installation/fixing. The manufacturer of sheet should submit related documents for expected product services performances of pre painted metal sheet as per relevant ASTM/IS. Manufactuer's recommended installation methodologhy, all types of accessories considered for roofing. Fasterns shall be coloured baked enamel supper durable, polyester with silicon coating of film thickness of minimum 25 micron (including primer) on top minimum 10 micron (including primer on interior fance. The paint shall be shade as approved by GE. The sheet shall have wide pans with minimum 2 small stiffening ribs for effective with self-drilling screws as per manufacturer instructions complete all as specified and directed . Note : Total thickness of sheet with BMT, AZ 150 coating and painting shall not be less than 0.575 mm. Note:-Crimp Curved roofing shall be provided at outer longitudinal edges of projections or wherever directed by EIC and no extra shall be paid on this account.

All as per item No 10 but plain sheet as in valley/gutter complete all as specified and directed.

S&F in repairs fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugation side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and directed.

Taking down/removing of existing water proofing treatment on roof surfaces and wall surfaces complete, including screed bed, mud phuska, PCC, etc racking out joints, hacking for key, scrubbing down with water etc, and removing rubbish out of MD land.

M&L for screed bed 15 mm thick (average) plaster on concrete surfaces in CM 1:4 on roof, mixed with water proofing compound as per manufacturer instruction and finishing the surface even and smooth without using extra cement all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.

M & L for spreading / brushing neat cement slurry with 3.00 Kg/ Sqm on old concrete surface complete all as specified and directed.

M & L PCC type B0 (1:2:4) (using 12.5 mm graded stone aggregate) thickness as required at site) for padding concrete as on roof, mixed with water proofing compound as per manufacturer instruction etc complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.

M&L water proofing treatment on horizontal or vertical surfaces with provision of oil bound bitumen primer @ 0.50 Kg/ Sqm and providing 3 mm thick, APP modified water proofing membrane weighing not less than 3.50 Kg/Sqm reinforced with non-oven polyester fabric weighing not less than 160 gm /Sqm all as per detailed specifications, sealed with overlaps shall be with torch application and applying two coats of aluminium reflective paints complete all as specified and as directed.

Supply only liquid water proofing compound of , all as specified and directed. Note: Ratio of WPC with cement shall be as per manufacturers instructions.

Dismantling wall and ceiling/cup boards (fibre, pulp, insulation, etc) or insulation boards/slabs, blankets, any thickness, including cover fillets, fixed in any position complete all as specified and directed.

S & F for 12mm thick perforated false ceiling at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 X 595 mm of approval texture design and patterns having moisture content less than 2 %, humidity resistance of 99 %, NRC 0.50 to 0.75 as per IS 8225 : 1987, Noncombustible as per BS 476 (Part-4)- 1970 and light reflectance of 85 % (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main -T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15 x 32 mm of length 1200mm and secondary intermediate cross -T of size 15 x 32 mm of length 600 x600 mm, suspended from ceiling using galvanised mild steel items (galvanised @ 80 grams per Sqm), 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85 x25x2 mm galvanised iron perimeter of size 24 x 24 x 0.40 mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws all as specified and directed by Engineer-in- Charge

S & F-in-repair 18 mm thick 100% Lead free one side plain laminated PVC/WPC sheet of any colour with using sunmica of choice colour on one side for kitchen cabinet shutters, shelves and shutters for cup board or similar use and required bracket etc. The panels shall be fabricated using adhesive and screws where ever required. All edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bent finish as per manufacturer's instruction and make approved by GE complete all as specified and directed. Note : All fittings and fixtures such as Soft closer, handles, piano hinges etc for shutter should be included rated quoted by the contractor.

S&F single side prelaminated solid PVC door frame of size 50 mm x47 mm made out of 5 mm colour PVC sheet reinforced with MS tube , fixed in opening complete all as specified and directed .

S&F factory made both side prelaminated solid panel PVC door shutter 30mm thick (style) considting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail &bottom rail on either side & as gap insiert for top rail& bottom rail, panelling of double side prealm PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as spd & directed.

S&F Aluminium, anodised barrel tower bolt of extruded section of 150mm long complete all as specified

S&F Aluminium handles extruded type ,anodised of 125 mm size complete all as specified

Taking down chowkats or frames n. exc 1.50 sqm each each but with shutters (without taking off shutters from the frame) including cutting hole and making good disturbeds surface matching with existing complete all as directed. Note: PCC block shall be measured and paid separately.

Taking down chowkats or frames exc 1.5 sqm and not exceeding 4 sqm each but with shutters (without taking off shutters from the frame) ncluding cutting hole and making good disturbeds surface matching with existing complete all as directed. NOTE: PCC block shall be measured and paid separately.

Providing and fixing factory made uPVC white colour sliding windows, area nexc 2.00 Sqm each three track made of extruded profiles with wall thickness of 2.3 mm (plus or minus 0.2 mm). Window profile with hollow sections with multi chamber, frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), sliding mesh sash (42 mm x 57 mm), sliding interlock (One vertical length in each shutters) (45m5 mm x 28 mm), glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all fusion welded at all corners, including railing of holes for fixing of hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2 plus or minius mm thick galvanized steel frame (30 mm x 18 mm) 2 Nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasterners. Hardware : Touch lock of zinc alloyed (white powder coated), steel roller system, stainless wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories) (Note : (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose (ii) Provision for AC opening to be provided in each window. (iii) A fixed glass to be provided in each opening for AC. ).

Providing and fixing factory made uPVC white colour sliding windows, exc 2.00 Sqm each three track made of extruded profiles with wall thickness of 2.3 mm (plus or minus 0.2 mm). Window profile with hollow sections with multi chamber, frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), sliding mesh sash (42 mm x 57 mm), sliding interlock (One vertical length in each shutters) (45mm x 28 mm), glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all fusion welded at all corners, including railing of holes for fixing of hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2 plus or minius mm thick galvanized steel frame (30 mm x 18 mm) 2 Nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasterners. Hardware : Touch lock of zinc alloyed (white powder coated), steel roller system, stainless wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories) (Note : (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose (ii) Provision for AC opening to be provided in each window. (iii) A fixed glass to be provided in each opening for AC. ).

S&F 5.50mm thick sheet glass ordinary quality and glazing with PVC beading in square not exceeding 0.50 sqm in each panes complete all as specified.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

Hacking out old broken glass ( any thickness size ,quality or description ) from wooden frame or stone etc complete all as specified and directed

S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each panes complete all as specified and directed.

S&F 3.00 mm thick figured glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Taking down shutters of any description not exceeding 1 sqm each complete all as specified and directed.

M & L for 35 mm thick factory made Second class hardwood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass/ gauze etc for windows/ventilators, sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats complete all as specified and as directed.

All as per item No 39 but without sash bars for window/ventilators complete all as specified and directed

S&F Butt hinge medium weight cold rolled mild steel 75 mm long, complete all as specified and directed.

M&L for PCC 1:3:6 Type C-1 using 20mm graded stone aggregate as in bed bloks of hold fasts etc including necessary form works etc complete all as specified and directed.

M&L for Flat iron for fixing of hold fasts for doors and windows etc incuding treating with cerocete iol complete all as specified and directed

M & L for Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M & L for 35 mm thick factory made Second class hardwood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass/ gauze etc , sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats complete all as specified and as directed.

S&F 32 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete, all as specified and directed.

S & F 300 mm long aluminum anodized sliding door bolts with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F Butt hinge medium weight cold rolled mild steel 100 mm long, complete all as specified and directed.

S&F aluminium anodized barrel tower bolts of extruded section length of bolt 200 mm long complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type 150 mm size complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L for preparation of new steel surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F in repairs 15mm bore fancy type pillar taps, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes and fixed complete all as specified and as directed.

S&F in repairs 15mm bore angle/stop valves fancy brass chromium plated, screwed down, high pressure with crutch or butterfly handles screwed both ends for iron pipes complete all as specified and as directed.

S&F in repairs 15 mm bore concealed stop valves, cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated with long shank and cup complete all as specified and as directed.

S&F in repairs Brass chromium plated shower rose 125 mm size complete all as specified and as directed.

S&F in repairs brass chromium plated towel rail of 600 mm long with end bracket both sides complete all as specified and directed

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connection and fixed in position complete all respect as specified.

S&F cabinet mirror of size (500x400) mm complete all as specified and as directed.

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F corner glass shelf 300mm (with brass brackets) complete all as specified and as directed.

S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall as with fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm including taking out unserviceable kitchen sink , complete all as specified and as directed.

M&L in repairs PVC flushing cistern push button / handle type of 10 ltr capacity , coloured complete with all fitting fixed to with WC including PVC flush pipes ,brackets complete all as specified and directed.

S&F in repair vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete all as specified and as directed .

S&F in repair vitreous china wash hand basin white size 550x400 mm including bracket , CP waste coupling of size 32mm dia pillar taps ,waste pipes , chain and plug etc complete all as specified and as directed.

S&F in repair vitreous china squatting pan `Orissa ' pan pattern size 580x440mm white `P' or `S' trap front back inlet ( excluding flushing cistern and flush pipes) complete all as specified and directed.

S&F in repair plastic water closet seat cover colour/ white, closed pattern with flat bottom and MS CP or aluminised hinging device complete all as specified and directed.

S&F in repairs chromium plated soap dish complete all as specified and as directed.

S&F in repairs stainless steel kitchen rack standard size (24x36x10) inch complete all as specified and directed.

S&F in repair 20 mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs fancy type chromium plated bib cock 2-way double handle with flange complete all as specified and as directed.

S&F in repair fancy type chromium plated central hole basin mixer w/o pop up for 15mm bore pipes complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore complete all as specified and as directed.

All as per item No 74 above but 20mm bore of pipes.

S & F steel water tubing medium grade, galvanised with all fittings of 15 mm bore and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 15 mm bore complete all as specified and as directed.

S & F steel water tubing medium grade, galvanised with all fittings of 20 mm bore and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 20 mm bore complete all as specified and as directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar in 1:3 ,cutting depth not exc 10 cm girth as directed.

S & F in repair Swivel shower arm 15mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour for fixing with 15 mm pipe, (Minimum weight 40 grms), complete all as specified and as directed.

S&F in repair fancy type Bib taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-105 gms) complete all as specified and as directed.

S&F in repair fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-120 gms) complete all as specified and as directed.

S&F in repair angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-90 gms) complete all as specified and as directed.

S&F in repair 300 mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S & F in repairs butt hinges medium weight cold rolled mild steel of size 75 mm long at any location all as specified and directed.

Easing of door shutters exc 1.0 Sqm but n.exc 2.0 sqm each for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Easing of window shutters n.exc 1.0 Sqm each kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed.

S&F-in-repairs rubber beading 75mm wide fixing with nail/screw in door shutters complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick (below or above ground level) complete all as directed

M&L for PCC (1:2:4) type B-1 as in flooring 40 mm thick using 20 mm graded stone aggregate cement concrete finish even and smooth with using extra cement complete all as specified .

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), white colour, triple layer construction, hoisted & fixed in position, including dismantling of old tank & removing to where directed complete all as specified and as directed.

S&F 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and as directed.

S&F in repairs 15 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms) complete all as specified as directed.

S&F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified as directed.

S&F in repairs lid(cover) for PVC tank for 500/1000 ltr capacity of tank with complete arrangements of fixing with existing tanks like as nuts and bolts, hasp and staple etc, all as specified and directed.

Demolitation of brick work built in cement or cement lime mortar including all quoins, achies, pillars complete all as specified as directed.

M & L Brick work with fly ash bricks, Straight or curved on plan exc. 6 m mean radius built in CM 1:6, complete all as specified and directed.

-ditto- as per item No 98 here in before but except bricks works

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubbing down with water etc., complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick or stone masonry of wall in CM (1:6) finished fair and even without using extra cement including two coats of cement based paint over a coat of primer on newly plastered surfaces complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick or stone masonry of wall in CM (1:4) finished fair and even without using extra cement including two coats of oil bond distamper emulsion paint over a coat of primer on newly plastered surfaces complete all as specified and as directed.complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick or stone masonry in ceiling in CM (1:3) finish fair and even without using extra cement including three coats of white wash comple complete all as specified and directed.

M & L in repair for cast iron floor trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate, 75 mm dia outlet complete all as specified and directed.

S & F in reair 100 mm bore cast iron sanitary connection socket fixed to WC outlet etc complete all as specified and directed.

S & F in repair 75 mm bore cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors complete all as specified and directed.

Ditto all as per item no.106 here-in-before but for 100 mm bore.

M/S ASM ENTERPRISES

M/S SDS Construction Co.

RAJA RAM AND COMPANY

M/s DKS Engineering Works