Annual running maint. and operation of street light and HM light i/c monitoring of street lights, pumps and EI of Vrs underpasses RUB, Subways and underneath of flyover and Sewage/Storm water pumps, S/Stn, DG sets at Vrs location under M-251 Delhi

Amount

Fabrication, supply and erection of flange mounted hot dip Galvanized Octagonal Poles of 10 meters height made from 3 mm. thick HT Steel plate, having bottom dia of 155 mm. & top dia of 70 mm. complete with window with hinged cover at a height of 2.5 mtrs. from the base for cable termination block etc. and galvanized base plate of size 250mm X 250mm X 16mm thick on existing cement concrete pedestal as required. i/c supplying and fixing of the following in the window box provided for cable termination :- a) Supplying and fixing 4 Nos. 25 mm. dia X 800 mm. long GI foundation bolt (EN8grade) with nuts, washer including 2 Nos. template of 3 mm. thick size 250 X 250 mm. with 4 Nos. 28 mm. dia holes, to match with PCD of Pole base plate as reqd. (For 10 mtr.). b) Supplying and fixing 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. G.I strips 4mm thick of suitable length and having suitable size tapped holes - 10nos. as reqd. c) Supplying and fixing of 63 Amp terminal block suitable for 25sq.mm conductor -4 nos. & shorting links – 5nos. on DIN channel i/c pdg. and fixing DIN channel of suitable length – 2 nos. on the existing laminated sheet. d) Supplying and fixing 6 Amp, SPMCB, ‘C’ Characteristics Curve - 2 No. Earth stud-2Nos. welded at suitable height two nos. washers, springs washers & nuts. e) Cable support clamp suitable for 4 Nos of 4x25sqmm cable.

Fabrication, supply and erection of flange mounted hot dip Galvanized Octagonal Poles of 8 meters height made from 3 mm. thick HT Steel plate, having bottom dia of 130 mm. & top dia of 70 mm. complete with window with hinged cover at a height of 0.5 mtrs.from the base for cable termination block etc. and galvanized base plate of size 200mm X 200mm X 12mm thick on existing cement concrete pedestal as required.i/c supplying and fixing of the following in the window box provided for cable termination :- a) Supplying and fixing 4 Nos. 25 mm. dia X 700 mm. long GI foundation bolt (EN8grade) with nuts, washer including 2 Nos. template of 3 mm. thick size 200 X 200 mm. with 4 Nos. 28 mm. dia holes, to match with PCD of Pole base plate as reqd. b) Supplying and fixing 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. G.I strips 4mm thick of suitable length and having suitable size tapped holes - 10nos. as reqd. c) Supplying and fixing of 63 Amp terminal block suitable for 25sq.mm conductor -4nos. & shorting links – 5nos. on DIN channel i/c pdg. and fixing DIN channel of suitable length – 2 nos. on the existing laminated sheet. d) Supplying and fixing 6 Amp, SPMCB, ‘C’ Characteristics Curve - 1No. Earth stud-2Nos. welded at suitable height two nos. washers, springs washers & nuts. e) Cable support clamp suitable for 4 Nos of 4x25sqmm cable.

Providing and laying in position 1:2:4 reinforced cement concrete foundation of size 600 mm.(L) X 600 mm. wide and 1500 mm. deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm. dia- 1660mm long (approx)- 8 Nos. and reinforcement ring of cold twisted bar of 8mm dia - 2200mm (approx) - 10nos. (with 150mm spacing) as required with positioning of foundation bolts (as per item below) and providing 90 mm. (O.D) DWC, HDPE Pipe for cable entry & exit as required. (For 8 mtr. poles)

Providing and laying in position 1:2:4 reinforced cement concrete foundation of size 750 mm.(L) X 750 mm. wide and 1800 mm. deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm. dia- 1960mm long (approx)- 8 Nos. and reinforcement ring of cold twisted bar of 8mm dia - 2800mm (approx) - 10nos. (with 150mm spacing) as required with positioning of foundation bolts (as per item below) and providing 90 mm. (O.D) DWC, HDPE Pipe for cable entry & exit as required. (For 10 mtr. poles)

Fabrication, Designing, Supplying & Fixing of Galvanized arm bracket 1000 mm long Single / double / triple over hang with tightening bolt etc. as per design approved by Engineer-In-Charge.

Supplying/Laying/Fixing of one number PVC insulated and PVC sheathed/XLPE Al. Conductor power cable of 1.1 KV grade of following sizes in the existing RCC/HUME/METAL pipe/Duct/Surface of Flyover as per instructions of The Engineer-in-Charge as reqd.

4 x 16 Sq.mm

3 X 10 sq.mm

Fabrication, supplying and installation of sintex hot press moulded junction box with outside dimensions as 230*170*105 mm and inside dimensions as 200*140*95 mm with single door(L) and having following accessories mounted inside the junction box with making suitable arrangement for installation on 12 mtr streetlight pole with MS U Clamp at height of around 10 mtrs with drilling small hole in existing streetlight pole for drawing wire from junction box to streetlight fitting through bracket i/c connection, testing complete as required. Terminal strip 30 Amp rating for termination of cable I/c & O/g- 1 Nos

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required. 100 mm dia

Supplying, Installation, Testing & Commissioning of pre-wired 200 watt of street light LED Luminaire made out of PDC aluminium body with minimum lumens of 100 per watt suitable for cool day white light having minimum CCT 5700K, power factor not less than>0.90, CRI>70% (including dismantling the old fitting if any) complete with all accessories etc. directly on ceiling/wall/pole including connection with 1.5 Sq.mm. FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying, Installation, Testing & Commissioning of pre-wired 150 watt of street light LED Luminaire made out of PDC aluminium body with minimum lumens of 100 per watt suitable for cool day white light having minimum CCT 5700K, power factor not less than>0.90, CRI>70% (including dismantling the old fitting if any) complete with all accessories etc. directly on ceiling/wall/pole including connection with 1.5 Sq.mm. FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Replacement of existing old fitting by providing energy efficient LED Flood light fitting luminaries of rating 50 watts or more made with high pressure die cast aluminium housing with powder coated with lens, IP-66 suitable for operation on 150 to 265V single phase AC supply having system efficiency 100 lumen per watt or more and colour temperature of 5500 K to 6000K CRI>70 with driver having power factor >0.95, THD<10% and efficiency >85% potted driver should be IC compliance with minimum 10 KV surge protection LED life shall be not less than 50000 burning hours, including fixing MS Weld Mesh on the fitting and fixing it over the fitting by bolting ,using fasteners etc. complete etc. including, connection, testing & commissioning i/c credit for dismantle material etc. complete as reqd.

Fabricating, Supplying & Fixing wire mesh protection frame work made out of 40 mm x 6 mm thick angle & "T" strengthened with intermediate members of MS flat iron of size 30 mm x 5 mm thick welded at a distance of 30 cm horizontally & vertically and duly welded with wire mesh of size 75 mm x 25 mm made with 6 SWG wire mash of size 75 mm x 25 mm made with 6 SWG wire on all sides and top i/c providing and fixing of double door gate with double locking arrangement ( Two Nos. sliding bolts and One No go down lock) having 0.5 mtr. long legs of 40 mm x 40 mm x 6 mm thick angle iron, duly grouted in cement concrete foundation ration 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate), up to suitable depth painting with one coat of red oxide & Two coats of synthetic enamel paint of approval colour and shade etc. complete as reqd.

Earthing with G.I. earth pipe 4.5-meter-long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and lying earth connection from earth electrode with 6 SWG dia G.I wire in 15 mm dia G.I pipe from earth electrode i/c connection with G.I thimble excavation and re-filling as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

R P Electrical and Maintenance Works

DRP Air Conditioning Work

A K Enterprises

Shri Bankey Bihari Electricals

Shaka Electrical (India)

Krishna Electreical Works

M/s Bhagwat Associates