Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.0 LAccepted-AOC | L1 | Accepted-AOC Being L1 Bid | |
| 2 | L2₹46.5 L+₹1.4 L (3.21%)Rejected-AOC | L2 | Rejected-AOC Being higher than L1 Bid | |
| 3 | L3₹48.1 L+₹3.0 L (6.66%)Rejected-AOC KALIBARI BAZAR TUPKHANA PART I PO ARUNACHAL P S SILCHAR DISTT CACHAR ASSAM 788 025 | SILCHAR | CACHAR | ASSAM | 788025 | L3 | Rejected-AOC Being higher than L1 Bid | |
| 4 | L4₹51.0 L+₹5.9 L (13.2%)Rejected-AOC | L4 | Rejected-AOC Being higher than L1 Bid | |
| 5 | L5₹51.3 L+₹6.2 L (13.8%)Rejected-AOC | L5 | Rejected-AOC Being higher than L1 Bid |
Tender Value
₹46.7 L
EMD Value
₹93,400
Closing Date
1 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SILCHAR
GE SILCHAR, PO-ARUNACHAL, DIST-CACHAR, ASSAM-788025
SPECIAL REPAIR TO FOOTPATH BLDG NO T 37 AND LOW SECURITY WALL AT LAILAPUR AND VAIRENGTE UNDER GE SILCHAR
2022_MES_536916_1
8708/E8
Open Tender
Civil Works
Item Wise
180 days
VAIRENGTE
REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE SILCHAR
₹93,400
Yes
30 Aug 2022
9 Jul 2022
8 Aug 2022
9 Jul 2022
1 Aug 2022
27 Jul 2022
Amount
PART-I (B/R WORKS) Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning filling in incl watering, ramming in layers n.exc. 25cm thick in soil complete all as specified and directed.
Removing excavated surplus soil to a distance n.exc. 50m and depositing where directed at level n.exc. 1.50m above the starting point complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, as in soft/loose soil complete all as specified & directed
Demolition of reed lathing, single or double including battens and plaster or chicken wire lathing complete all as specified & directed.
Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles complete all as specified & directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness as in roof coverings, chajja, wall clading and the like complete all as specified and directed.
Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for Reinforcement cut as required to facilitate demolition complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Dismantling timber scantlings 40 sqcm and over in section, in any position, unframed work, etc complete all as specified.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, etc complete all as specified & directed.
Dismantling timber boarding of any description fixed in any position with nails complete all as specified and directed.
Taking down shutter of any description each not exceeding 1 Sqm each leaf complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M & L for Loose filling with aggregates of gauge 80 to 150 mm in weep holes using broken stones or boulders complete all as specified and directed.
Material and labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in alternate panels and joints filled with bituminous mastic filling in 1 part of bitumen and 3 part of sand complete all as specified and directed.
M&L for Brickwork with subclass ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified & directed.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified & directed.
M&L Plain cement concrete 1:2:4 type B-0, (using 12.5 mm graded stone aggregate) as in bed blocks, holdfast blocks, coping, lintels upto 1.5m clear span, cills, lin steps, kneelers, bed plates, apex stones kerbs benching and similar work including necessary form work complete all as specified and directed.
Material and labour for formwork to sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished flat surface of concrete, complete all as specified and directed.
Material and labour for formwork to sides of Columns, pillars, piers, posts and struts for rough finished flat surfaces of concrete , complete all as specified and directed.
Material and labour for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished flat surface of concrete, complete all as specified and directed.
Material and labour for mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secruing with clips complete all as specified and directed.
All as per item No. 26 above but 6mm to 8 mm dia complete all as specified and directed
All as per item No.26 above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc complete all as specified and directed
M&L for Reinforced cement concrete Design mix (M-25) using 20 mm graded aggregate in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L RCC Design mix (M-25) using 20 mm graded aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L RCC Design mix (M-25) using 20 mm graded aggregate in beams, cantilevers, bressummers, lintels over 1.50 mtr span complete all as specified and directed.
Material and labour for rendering 15 mm thick in cement mortar 1:6 on brick wall or concrete surfaces finished the surfaces even and fair complete all as specified and directed.
Material and labour for rendering 15 mm thick in cement mortar 1:4 on brick wall or concrete surfaces finished the surfaces even and fair complete all as specified and directed.
M&L for Rendering 15mm thick in two layers [base layer 10mm in CM 1:4 & finishing layer 5mm thick in cement mortar (1:4)] using water proofing compound in 2nd layer only on on fair faces of brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement complete all as specified & directed. Note : WPC shall be measured and paid separately.
M&L for Rendering 15mm thick in cement mortar (1:4) on brick work or concrete surfaces on stone masonry surfaces or surfaces other than fair face of brick work or on one side of lathing etc, complete all as specified and directed.
Supply only of Integral waterproofing compound complete all as specified & directed.
Material and labour for providing 100 mm thick plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.
Material and Labour for 40 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded aggregate as in floor finished even & fair complete all as specified and directed.
S&F Non Skid ceramic tiles colour 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 including brushing with neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.
M&L for coloured glazed ceramic tiles (300x200) 7mm thick on vertical surface such as skirting, dados, risers etc. set and jointed in neat cement slurry and pointed in coloured cement or pigment to match colour tiles over & incl 10 mm thick screed layer in CM 1:4 complete all as specified and directed.
M&L sand filling under floors or in foundation including watering levelling and consoliation as directed complete all as specified and directed.
M&L machine pressed precast concrete interlocking paver block coloured pre polished (rubber moulded) any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade with proper jointing, pointed with grey cement and pigment complete all as specified and directed.
M&L for 15 mm thick screed layer in CM 1:4 for laying floor finishes complete all as specified and directed.
M & L for rubber moulded chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry (with white cement and pigment ) in floors complete all as specified and directed.
Supply and fix Steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 grade St.-210 complete all as specified and directed.
S&F Mild steel screw bolt 11 to 15 mm dia (machine made) with hexagonal or square heads at one end and screwed at the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.50cm and n. exc 30 cm long, complete all as specified and directed.
S&F plates (plain or chequered) Fe-290 (Gde E165) cut to required size, forming holes to receive holding down bolts and welded to tubular/square hollow section tubes at both ends complete all as specified and directed.
Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe.410 W.( Gde-E-250) complete all as specified and directed.
Supply and fix 2 way sliding anodized aluminium glazed ventilator shutter with frame consists of following specification complete all as specified and directed. (a) Ventilator frame 2 track of size 60mmx25mmx1.5mm thick (b) Stiles and rails of size 35mmx25mmx1.5mm (c) 35mmx35x1.5mm T section mullion (d) PVC gasket with 4mm thick tinted glass, incl. aluminium handles with necessary locking arrangement Note : Measurement to be taken as overall width and height of ventilator. No shutter or frame to be measured separately. All necessary accessories including tinted glass required for assembling and fixing window at proper place complete are deemed to be inclusive.
Supply and fix 3 ways sliding anodized aluminium glazed window shutter with frame with the following specification all as specified & directed. (a) Window frame 3 track of size 95mmx25mmx1.5mm thick (b) Stiles and rails of size 35mmx25mmx1.5mm (c) 35mmx35x1.5mm T section mullion (d) PVC gasket with 10mm thick tinted glass, incl. aluminium handles with necessary locking arrangement for 02 Nos glazed shutter (e) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples incl. aluminium handles with necessary locking arrangement for 01 No gauzed shutter Note : Measurement to be taken as overall width and height of window. No shutter or frame to be measured separately. All necessary accessories including tinted glass and stainless steel wire cloth required for assembling and fixing window at proper place complete are deemed to be inclusive.
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
Supply & fixing Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
Supply and fix Mild steel work such as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required :hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chain ; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
Supply and fix Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work , conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F for Pre-painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
S&F 20mm dia mild steel, chromium plated curtain rods with brackets, including fixing stops, rollers bracket & side end cap fancy type complete all as specified and directed.
Supply and fix 100 mm size stainless steel butt hinges medium weight fixed with stainless steel screws complete all as specified and directed.
Supply and fix Aluminium sliding door bolt, 300 mm with hasp, staple(bolt type) & fixing clips at sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed,complete all as specified and directed.
S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm extruded aluminium alloy handles cast type anodized complete all as specified and directed.
Material and labour for Wire netting of stainless steel wire 1.4mm dia , size of mesh in 25 mm fixed with tinned tacks of stainless steel wire staple complete all as specified and directed.
Supply and fix 110 mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints, fxed to walls fixed with MS clamps of suitable size nuts-bolts complete all as specified and directed.
Supply and fix Anodised aluminium snap grid frame work for false ceiling all as specified with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including 4 mm thick pre-painted decorative Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed
Materials and Labour for Mild steel angle, flat work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. conforming to Fe -290-Gde E-165 complete all as specified and directed.
Supply and Fix in repairs for galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing's and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed (each line wire to be measured).
M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm in width or girth & applying two coats synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Material and labour for preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over & incl. alkali resistant primer coat as per paint manufacturer's instructions complete all as specified and directed.
M & L for preparation of newly plastered surfaces and applying three coats of white wash on surface walls complete all as specified and directed
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.
PART-II (E/M WORKS) Taking down carefully copper/aluminum existing point wiring (light/fan/socket or power points) complete incl wooden battens/casing capping or conduit etc (without disturbing existing fittings point wiring etc) and all connected fittings such as switch, socket, ceiling rose, lamp holder, brackets ceiling fittings, bulk head fittings and fan regulator etc and making good to disturbed surfaces of wall floor etc complete all as specified and directed.
Dismantling of old unserviceable main switches DBs, MCB enclosures, electric meter, PVC rectangular blocks etc and keeping in safe custody either for reuse or for disposal Including making good to the disturbed surface of wall complete all as specified and directed.
M&L for Point wiring using FRLSH PVC insulated unsheathed multi strand 1100 volts copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , , connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc for one light/fan/bell point complete all as specified and directed.
All as per item No. 73 above but for 5 Amps socket Point (Same board), complete all as specified and directed
All as per item No. 73 above but for 5 Amps socket Point (Independent board), complete all as specified and directed
All as per item No. 73 above but for one three pin 15 Amps socket outlet on independent board with 1100V grade PVC insulated and unsheathed 2.5 Sqmm multi strand FRLS copper conductor cable and PVC insulated and unsheathed multi strand copper conductor 2.5 Sqmm as earth continuity conductor drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , , connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc for 15 amps socket outlet complete all as specified and directed.
S & F switch piano, 5Amp single pole, flush type one way 230 volts complete all as specified and directed.
S & F Socket outlet 2 in 1, 5 pin, 5 Amps flush type complete all as specified and directed.
S & F Switch Socket combination outlet 2-in-1, 2 pin & 3 pin 5 Amps flush type complete all as specified and directed
S & F Switch Socket combination outlet 2-in-1, 5 Amps & 15 Amp , 6 pin ISI marked flush type complete all as specified and directed .
Supply and fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.
Supply and Fix Angular Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with and incl LED lamp/bulb ball type of 10 Watt 3 star complete all as specified and directed.
Supply and Fix stepped type electronic fan regulator flush type socket type complete all as specified.
Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size complete all as specified and directed.
M & L for circuit /submain wiring along with earth wire 2 x 6.0 Sqmm PVC FRLSH insulated unsheathed cable multi-strand copper conductor including 1 x 6.0 Sqmm PVC insulated unsheathed multi strand copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , , connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed. Note: Two run of single core cable and one run of earth wire will be mearsured as one length
S&F LED linear light fittings 20 Watt basic all purpose surface and wall mounted and LED batten with polycarbonate housing and intrigated electronic driver and connecting with 3 core flexible copper cable PVC insulated of size 16/0.20 mm complete all as specified and directed. Make:- Crompton Greaves Cat No. CCS-100-20-65HL2-DP-NWH or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/ Havells
S&F LED Bldg Security light fitting of 25 watt fixed on & incl MS bracket, made out of 40 mm bore medium grade GI pipe 1.5 mtr long with MS clamps and nut bolts of suitable size complete all as specified and directed. Make:- Crompton Greaves Cat No. LSTS-25-CDL-M or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/ M/S Jaquar & Company Pvt Ltd/ Havells
S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size with LED complete all as specfied and directed. Make : Havells Cat Part No. HEXAFIT10WLED857SSYMBOPC or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton
M&L for fan hook fabricated with MS flat 25x6mm 300 mm long 02 nos bend to shape drilled with holes and MS nuts ,bolts and washers of required side with one coat of primer and two coats of synthetic enamel paints complete all as specified and directed
Taking down Ceiling fan of any size/sweep for replacing bearing, bush or for rewinding after disconnecting the wire from existing ceiling rose and refixing the same after rewinding with super enamelled copper winding wire incl. cleaning dust, oiling greasing, servicing and replacing bearing, gun metal bush, rubber reel with clamp and nut-bolt, washer, lock pin, excellation gear sytem, boby painting etc as existing including connecting flexible 3 core cable from ceiling rose to connector of fan complete all as specified and directed.
Supply and fix plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed. Make :-Crompton Cat aprt No BRISK AIR NEO or equivalent in Havells / Bajaj / Orient
Supply and fix sheet metal enclosure for DB's TPN with 200 Amps rated bus bar 415 Volts, 04 way double door etc complete all as specified and directed.
Supply and fix sheet metal enclosure for DB's SPN with 200 Amps rated bus bar 240Volts, 08 way double door etc complete all as specified and directed.
Supply and fix MCB TPN 63 Amps 240 Volts 'C' series complete all as specified and directed.
Supply and fix MCB SPN 32 to 40 Amps 240 Volts 'C' series complete all as specified and directed.
Supply and fix MCB SP 5 to 32 Amps 240 Volts 'C' series complete all as specified and directed.
Material and labour for laying of bricks locally available sub-class 'B' brick (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the directon of cable complete all as specified and directed.
Supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. Note:- Thickness of sand cushion after punning down will be measured and paid separately.
Supply, fixing, commioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 16 Sqmm 4 core laid in trenches/fixed to wall/under road/pipe etc with and including copper cable glands & copper thimbles incl taking out old unserviceable cable complete all as specified and directed.
Material & labour GI tube light grade 40 mm bore for protection of UG cable including dismantling of old unsv pipe complete all as specified and directed.
Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 m deep bellow ground level) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C1, 50 mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, 15 mm bore GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance not exceeding 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES Schedule 2009 Part-I complete all as specified and directed.
M/S MOLOY KUMAR DEY
M/S SANJIB DEB
MS AFTAB LASKAR
Anup Kumar Paul Choudhury
m/s builders and suppliers
Younus Khan
M/S TAPAN KUMAR RAY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .