PERIODICAL SERVICES INCL WELCOME MAINT TO OTM AND MD BLDGS UNDER AGE BR II UNDER GE W MATHURA

Amount

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.

Taking up or down 15mm dia, steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Taking up or down 20mm dia, steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded, jointed and pointed in any mortar complete all as specified and directed by Engineer-in-charge.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faced surface of brick masonary or concrete surface of walls, finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall finished even and fair in CM (1:4) mixed with water proofing compound complete all as specified and directed. Note: Supply of WPC shall be measured and paid separately.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed by Engineer-in-charge.

M&L for rendering 5mm thick in CM (1:3) on ceiling, finished surface even & fair without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparartion of new plastered surfaces of walls and applying two coats cement base paint on walls complete all as specified and as directed.

M&L for preparation of new plastered surfaces of external wall and applying two coats of weather proof exterior emulsion paint over one coat of primer over 1mm thick wall care putty on walls surfaces and smoothening the surface with mechanised sanding etc complete all as specified and directed. Note : (i) weather proof exterior emulsion shall be done by using roller. The cost of the same deemed included in quoted rate. (ii) In case of places where using of mechanical equipment are not possible, Contractor may use manual scraping tools for surface preparation with prior approval of Engineer-in-Charge.

M&L for rendering dubbing coat over irregular surfaces of chajjas roof projections / ceiling / facia etc average 15mm thick in CM (1:4) over cement slurry coat @ 3Kg/Sqm making the surface even followed by 5mm thick rendering in CM (1:3) furnished even & smooth including making of drip course as required complete including roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed. Note : Rate for form work if required to be included in the quoted rate by the contrator.

M&L for preparation of new plastered surfaces of wall and applying two coats of acrylic distemper over one coat of primer over 1mm thick wall care putty on walls surfaces and smoothening the surface with mechanised sanding etc complete all as specified and directed. Note : (i) Acrylic distemper shall be done by using roller. The cost of the same deemed included in quoted rate. (ii) In case of places where using of mechanical equipment are not possible, Contractor may use manual scraping tools for surface preparation with prior approval of Engineer-in-Charge.

M&L for complete removal of existing treatment on old internal wall surfaces of any description and preparation of old surface by mechanised sander having suction vaccume bag and after preparing the surfaces applying two coats of acrylic distemper over one coat of primer over 1mm thick wall care putty on walls surfaces and smoothening the surface etc complete all as specified and directed. Note : (i) Acrylic distemper shall be done by using airless roller. The cost of the same deemed included in quoted rate. (ii) In case of places where using of mechanical equipment are not possible, Contractor may use manual scraping tools for surface preparation with prior approval of Engineer-in-Charge.

M&L for complete removal of existing treatment on old external wall surfaces of any description and preparation of old surface by mechanised sander having suction vaccume bag methodology and after preparing the surfaces applying two coats of weather proof exterior emulsion paint over one coat of primer on walls surfaces and smoothening the surface etc complete all as specified and directed. Note : (i) weather proof exterior emulsion paint shall be done by using airless spray. The cost of the same deemed included in quoted rate. (ii) In case of places where using of mechanical equipment are not possible, Contractor may use manual scraping tools for surface preparation with prior approval of Engineer-in-Charge.

M&L for preparation of old decorated, plastered or pointed surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots etc and applying one coat of white wash complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of old decorated, plastered or pointed surfaces of ceiling by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots etc and applying one coat of white wash complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of old plaster surfaces of walls and applying one coat of cement based paint on walls complete all as specified and directed. Note:- The item will be executed in G+2 story Bldg.

M&L for complete removal of existing treatment and preparartion of old surfaces of walls and applying two coats of cement based paint on walls etc complete all as specified and as directed.

M&L for preparation of old painted surface of any discpription and applying one coat of exterior emulsion paint of Dark Shade, complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old surface of walls and applying two coat of distemper oil emulsion distemper over a coat of 1mm thick wall putty on wall etc complete all as specified and directed.

M&L for preparation of old decorated, plastered or pointed surfaces of wall by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, washing, rubbing down and stopping of distempered surface, filling of cracks etc and applying one coat of oil bound distemper complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and painting one coat with synthetic enamel including cleaning, stopping and rubbing down and removing all drops, dirts and splashes etc. complete all as specified and directed.

M&L for preparation of old painted wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L glazed ceramic tile in vertical surface 450x300x7 mm thick etc set and jointed in neat cement slurry and pointed in white or colored cement on vertical surface over 10mm thick plaster in CM (1:3) complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:4) complete all as specified and directed by Engineer-in-charge.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:4) complete all as specified and directed by Engineer-in-charge.

All as per item No 28.00 (here-in-before) abvoe but as in skirting over 10mm thick backing coat in CM (1:3) complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed bed in CM (1:4) complete all as specified and directed.

All as per item No 30.00 (here-in-before) above but as in skirting over 10mm thick backing coat in CM (1:3) complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 20mm screed bedding in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L Green marble of work 18-20 mm thick (table rubbed and polished) in cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade including screed bed or bedding layer of 20mm thick in cement mortar (1:6) complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling water tank of 500 Ltr capacity and ball valve complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling water tank of 750 Ltr capacity and ball valve complete all as specified and directed.

M&L Ball valves PTMT 20mm (Min. wt 20 mm -210 gms), with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia; 'D' type, 600mm long between flanges fixed to plug with chromium plated brass screws including wooden or plastic cleat complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore galvanized steel water tubing medium grade with & including all fittings and fixed complete to walls and ceilings or laid in floors / trenches complete all as specified and directed by Engineer-in-charge.

S&F 20mm bore galvanized steel water tubing medium grade with & including all fittings and fixed complete to walls and ceilings or laid in floors / trenches complete all as specified and directed by Engineer-in-charge.

Fixing only 15mm bore old galvanised steel water tubing including cleaning with & including new fittings and fixed complete to walls and ceilings or laid in floors in new or old position complete all as specified and directed by Engineer-in-charge. Note: GI tubing retrieved vide item No 3.00 shall be used under this item.

Fixing only 20mm bore old galvanised steel water tubing including cleaning with & including new fittings and fixed complete to walls and ceilings or laid in floors in new or old position complete all as specified and directed by Engineer-in-charge. Note: GI tubing retrieved vide item No 4.00 shall be used under this item.

S&F in repair 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 15mm bore angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 15 mm dia stop cock fancy type, chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair wall mixer CP brass cromium plated hot and cold with or without telephonic shower arrangement 15 mm bore complete all as specified and directed.

S&F in repair 20mm bore stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 15mm bore chromium plated bib tap cast copper alloy fancy type screwed down, screwed for iron pipe or for brass ferrule and fix complete all as specified and directed.

S&F in repairs of Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as directed.

S&F in repair vitreous china wash down, water closet pan (pedestal pattern), white including fixing bolts and connection to flush pipe and drain out going pipe and closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, CP jet complete all as specified and directed.

S & F in repairs PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified and directed.

S&F in repair vitreous china wash basin white, flat back of size 550x400mm including a pair of cast iron brackets embedded in PCC 1:3:6 type C-1 blocks of size 10 x 7.5 x 15 cm with & including 32 mm dia PVC waste pipe, 32mm dia PTMT waste coupling half or full thread (minimum wt 45 grms) flange end bedded in red lead cement & other end fixed to waste pipe complete all as specified and directed by Engineer-in-Charge.

S&F pillar taps 15mm bore cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered hot' or'cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repair pillar taps 15mm bore cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered hot' or'cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repair 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F 100mm dia Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors fixed to wall complete including taking down old unserviceable pipe and fitting complete all as specified and directed.

S&F 75mm dia Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors fixed to wall complete including taking down old unserviceable pipe and fitting complete all as specified and directed.

S&F cast iron bends of 110mm bore any radius complete all as specified and directed.

S&F cast iron bends of 75mm bore any radius complete all as specified and directed.

S&F for repair 32mm Waste fittings, brass, chromium plated for glazed ware wash hand basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified.

S&F in repair 32mm dia waste coupling of PTMT (half or full threaded) minimum weight 45gms suitable for urinals complete all as specified and directed.

S&F in repair Stainless steel gratings 140mm bore size fixed with white cement, complete all as specified and directed.

S&F in repairs for stainless steel 25mm dia as in curtain rod including brackets and side holders complete all as specified and as directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs CP Soap dish, embedded in the wall approximate size 160 x 160 x 90mm complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheeet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair PVC mirror cabinet size 350X450mm of standard size fixed to wall with PVC sleeves and steel screws complete all as specified and directed.

S&F in repair PTMT swivel shower rose of any colour with swivel joints including shower arm of 15mm bore, 195 mm long with bend of 45 degree with flanges of PTMT (complete minimum weight 80 grams) complete all as specified & directed by Engineer-in-charge.

Ahmed constructions

GANGA CONSTRUCTION

RANA CONSTRUCTION

M/s Orient Traders

M/S MADHAV ENTERPRISES

m/s Purvi Gaur Construction

THENUA BUILDERS

ARCHI ENGINEERS

VANI CONSTRUCTION

MS CHAUDHARY ENTERPRISES

m/s meetu enterprises