Construction of chaupal and multipurpose hall (Civil work, Plumbing work and electrical work) at Firoz Gandhi Colony-I, ward no. 21, Zone-I, Gurugram.

Amount

-Supply , Erection and testing of 1200mm sweep 240V AC,50Hz, BEE energy 5-star rating ceiling fan with necessary connections with 1.5 sqmm copper wire with adjacent fan point complete in all respects of engineer incharge of the work.

-Supply, Erection,testing & commissioning of 1x36/40 watt 1220 mm long fluorescent tube T-5 fittings directly on wall including necessary connections with 0.75 sqmm PVC copper flexible cable for connecting the tube with the adjacent light point complete in all respects of engineer incharge of the work.Make:-Philips,Bajaj,GE,Wipro,Klite,crompton greaves

-Providing and fixing G.I pipes complete with G.I fitting and clamps including trenching and refilling etc. (External work) 25 MM

-providing and fixing G.I pipes complete with G.I fitting and clamps including cutting and jointing good the walls etc. Internal work concealed pipes including painting with anti corrosion bitumastic paint cutting chases and making goot the wall. 20mm

-Self Priming Monoblock pump 1 HP Make Crompton set complete work given head 6-45 meters Discharge 57-13 LPM

-Supply Providing and Fixing Crompton Brisk Air 250mm Exhaust Fan (White)

-good earth filling un even land. (HSR 5.2+4.1a+6.2(G)(i)+6.2(g)(ii)

-boring of 150 mm dia nominal boreholes through all type of soil shell and agure or other approved equipment until N value is more then 100 (nrefusel) test including as per IS standards and as per IRC 78-2000

-9.9. Note (II) (a)-Centering and shuttering for columns (square or rectangular or Polygonal in plan)- Extra for above storey upto a height of 4 meters of part thereof, (HSR 9.9 Note (II) (a))

-17.71 COST OF IRON FITTING ETC.

-HSR 13.97 (Terracing consisting of tiles 19mm thick heat resistant tiles for roof insulation300mm * 300mmlaid on 20mm thick 1:3 coarse sand mortar including grouting with neat white cement over average 75mm thick screed of 1:8:16 including two coats of bitumen laid hot at 1.65kh per sqmt on top of RCC slab and cleaning of top surface complete.)

-30.5 (Providing and Fixing in position best Indian make European type water closet suite,symphonic type consisting of White Toilet)

-30.13 (Extra over item no 30.3 to 30.6 for providing and fixing best Indian make plastic hygienic seat with lid complete instead of hollow black or white plaster seat and lid.White plastic seat) (Solid)

-30.67(Providing and fixing in position best Indian make paper holders fixed into wall with CP brass screws complete in all respects including cutting and making good the walls etc) (c) recessed vitroues chinaware 1 white

-30.75(Providing and fixing in position 15mm i/d brass bib cocks of best quality )as required by Er (a)Bib Cock Long Body

-30.76(Providing and fixing in position CP brass stop cocks)as approved by Er (a)15mm stop cock (ii)Concealed stop cock with flange

-30.82(Providing and fixing in position best Indian make flexible tube connection)(b)c.p.brass (iii)15mm*450mm

-30.41(Providing and fixing in position best Indian make (Ordinary)lavatory suites consisting of lavatory in vitreous chinaware size as given below including china plug for tap hole where necessary R.S. or C.I brackets for building into wall incluiding painting.32mm C.P.Brass waste with C.P.Brass chain rubber plug 15mm C.P brass screw down pillar tap with jamnuts or coupling best design.All fitings best Indian make and to the approval of the Er in charge.All brass work chromium plated and complete in all respects including and making good the wall floors and paintings of fittings etc.(White)(iv)550mm*400mm)

-29.95(Providing salt glazed stoneware pipe grade 'A' in standard length of 600mm each pipe marked with IS:651 and their lowering,cutting,jointing and testing as described in HSR item no 29.38,29.39,29.40 including the cost of jointing materials as well as carriage,loading,unloading,stacking handling,re-handling etc.,complete in all respect to the satisfactions to the engineer in charge.

-29.84(Constructing brick masonry inspection chamber size as given below upto 0.60 mtr average depth in cement mortar 1:5 lime concrete with 40 percent limer mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with floating coat of 1mm thick of neat cement RCC 1:2:4 slab 100mm thick /C.C topping 50mm thick with / C.C topping 50mm thick with 455mm *455 610mm inside light duty CI inspection chamber cover and frame weight as per ISI specification painted with 3 coats of black bitumastic superior paint complete as per standard design)(a)Size 450mm*450mm inside

-30.119(Providing and fixing of HDPE Water Storage tank of sintex,diplast,OK supreme make with covers/lids marked with IS 12701 on roof top complete in all respect to the satisfactions to Er in charge 2000ltr capacity

-30.59(Providing and fixing in position best quality stainless steel sinks built in draining board of size 600mm*450mm complete as described in item no 30.53 and 30.58(a)size 600mm*450mm*200mm

-HSR 30.29 (i) (ii) (iii) (iv) (1653+340%=7273.20)

-HSR 30.40 (b) (I) (I) 25 mm thick marble backs 680mm x 330 mm (200+340%=880)

-providing and fixing G I pipes complete with G I fitting and clamps including cutting and jointing good the same etc.internal work concealed pipes including painting with anti corrosion bitumastic paint cutting chases and making goot the wall 15mm

-29.90(Construction of rectangular standard brick masonry manhole chamber to standard drawings of SW pipe sewers or other circular pipe sewers upto to the require depth in 1.5 cement sand mortar,lime concrete bed and side of pipe sewer and cement concrete 1:2:4 in benching , 12mm thick water tight 1:2 cement sand plaster with a floating coat of neat cement and finish with 2 coats of sodium silicate on interior surface where require reinforced cement concrete slab 180mm thick fixing 560mm internal diameter CI manhole cover and frame weight not less then 2.5 quintal painted with 3 coats of black bitumen paint , fixing galvanized malleable iron steps embedded in 1:2 cement sand mortar complete .(iv)On 200mm internal diameter pipe sewer .(a)for 1.80 meters depth below ground level .

-29.94 (Providing and fixing SFRC manhole covers and frames marked with IS : 12592 including setting the same to correct lines and levels in 1:2 cement sand mortar over manhole including carriage loading stacking handling re-handling etc.complete in all respects to the satisfaction of Er-in-charge type extra heavy duty set(MD-10)(560mm clear opening )

-31.17 (Supply and erection of miniature circuit breaker/isolator240/415Volt in the existing distribution board including necessary connections :- a) Miniature Circuit Breakers of 9K.A. breaking capacity. ii) 6amp.To 32amp. a)6amp single pole

-31.17 iii (Supply and erection of miniature circuit breaker/isolator240/415Volt in the existing distribution board including necessary connections :- a) Miniature Circuit Breakers of 9K.A. breaking capacity. ii) 6amp.To 32amp. b)16 amp single pole

-31.17 (Supply and erection of miniature circuit breaker/isolator240/415Volt in the existing distribution board including necessary connections :- a) Miniature Circuit Breakers of 9K.A. breaking capacity. iii)40 amp to 63 amp (Triple pole with neutral)

-31.18 (xxvi) (Supply and erection of hexagonal M.S box 1.60mm thick having each side 8cms 7.5cms deep top covered with M.S lid by means of screws including 10mm dia 30cm long mils steel road made into suitable Suspension hook and erected in R.C.C slab for erection of fan ,the bottom covered with 3mm thick bakelite sheet with suitable holes ,Painting etc. complete with all labour and material required to complete the job).

-31.22(iii) ( Earthing with GI earth plate 600mmX600mmX6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. complete as required .

-31.22 (ix) (Providing and fixing 25mmX6mm GI strips at 0.5 meters below ground level as strip earth electrode including soldering etc. as required .

-31.22 (vii) ( supply and laying of 6 swg GI wire 0.5 meter below ground level as conductor earth electrode including thimble soldering etc. as required .

-31.24 (b) (ii) ( Excavation earth pit 180cm round at top and 90cm at bottom 4.5m deep and refilling the same in plains including supply on necessary charcoal /coke and salt mixture .

-31.24 (b) (iv) ( supply and erection of 60cmX60cm X6mm thick galvanised iron plate including necessary bolts and nuts to GI tape .

-31.24(b) (v) ( Providing standard watering tank including down pipe and CI cover with locking arrangement s etc.

-31.24 (b) (vi) ( Supply and erection of 20mmX 3mm thick lighting conductors GI tape fixed with suitable GI stapples of same size .

-31.24 (b) (viii) ( Supply and erection of 25mm dia 1.5 mtr. Long Lightning tube rod tappered into a point at the top with 16cmX16cmX3mm thick GI base plate and necessary nuts and bolts with washers .

-31.24 (b) (xix) ( Providing & fixing testing joints made of 20mmX3mm thick GI strips 125mm long with 4nos .GI Bolts and Nuts with washers complete .

-HSR 31.36 (II) light (c) long point (639+10%=702.90)

-31.36 (a)Fan Point (c) Long Point (733+10% = 806.30)

-31.36 (II)Light Point (b) Medium Point (433+10%=476.30)

-31.36 (vii) (a) 3 pin 5 amp plug point (283+10%=311.30)

-31.36 (viii) (c) 3 pin 15 amp plug point (970+10%=1067)

-31.36(a)Fan Point (b)Medium Point (524+10%=576.40)

-31.40 Supply and Erection of PVC unsheathed copper conductor cable single core 1100 volts in grade pipe of suitable size excluding cost and erection of pipe.(ii)cable size 2.5sqmm (3/1.05mm)

-31.40 Supply and Erection of PVC unsheathed copper conductor cable single core 1100 volts in grade pipe of suitable size excluding cost and erection of pipe.(vi)cable size 16 sqmm (7/1.70mm)

-31.42 (xv) 63/415V FP ELCB with 30 ma sensitivity (2050+10%=2255)

-31.44 Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall/ceiling ect. including cost of PVC bends, inspection box and all other materlial required to complete the job in all respects up to the entire satisfaction of engineer incharge of the work (b) 25mm dia

-31.41 (Supply,Erection and testing of double door sheet enclosure distribution board suitable for MCB's and ELCB's etc.recessed in wall including bonding to earth with all labour and material required to complete the job in all respects upto the entire satisfaction of Er incharge of the work.(vii)12-way,TP & N (Horizontal )(8+36)

-31.45 (Supply and erection of copper lugs including crimping etc upto the entire satisfaction of Er-in-charge of the work (d) 16 sqmm

-31.55 (Supply & erection of socket size rotary step type electronic regulator for A.C ceiling fan anchor make model 50440 ISI/SSK make PC 561 operated 120/280 volt A.C supply complete including cutting of existing bakelite sheet & making necessary connections etc. upto the entire satisfaction of the engineer in charge of the work)

- 31.58 (Supply and erection of PVC conduit pipe ISI marked ( Medium)(a) 32 mm dia)

-Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified sections, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, or approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete:- door and window frame of size 114 mm X 50 mm with 40 mm wide double rebate.

Bidder Name

Amount

RMH INFRASTRUCTURE(GSTN-06AHDPS0130M1ZG)

Contractor Satish Bansal(GSTN-06AXLPB1596J1ZA)

Contractor Satish Bansal

RMH INFRASTRUCTURE