REPAIR/REPLACEMENT TO UNSERVICEABLE JOINERY. TILING, PLUMBING WKS AT KITCHNER HOUSE, ASSOCIATED GUEST ROOMS AND SINGLE OFFICERS ACCN INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA

Amount

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as specified and directed.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from the site complete all as specified and directed.

Taking down shutters of any description area not exceeding 1.00 sqm each and removing from the site complete all as specified and directed.

Taking down shutters of any description area exceeding 1.00 sqm and not exceeding 2.00 Sqm each and removing from the site complete all as specified and directed.

Taking down shutters of any description including easing and adjusting and also refixing builders hardware as required for any description of door,window and ventilators etc and refixing in same opening complete all as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, steel window or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling structural steel work of any description including doors, gates, railing etc but excluding framed trusses complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge or any thickness in roof covering including stacking serviceable materials of re-use and removing unserviceable materials complete all as specified and directed.

Dismantling of ceiling board alongwith snap grid frame of any thickness including cover fillets complete all as specified and directed.

Dismantling of ceiling board of any thickness including cover fillets complete all as specified and directed.

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces incl racking out joints, hacking for key, scrubbing down with water etc. all as specified and directed.

Supply and fixing 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 30mm flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply & fixing factory made 30 mm thick 2nd class hard wood skeleton shutters open rebated and prepare to receive glass, gauge etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Part-I, Section 8.24(b) complete all as specified and directed.

S&F 35mm thick Factory made 2nd class hard wood glazed & skleton shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.20(a) complete all as specified and directed.

Supply & fixing factory made 35 mm thick 2nd class hard wood panelled shutters (any Nos of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers, fitted to chowkhats complete all as specified and directed.

S&F Factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drg as per manufacturer instrutions.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter with partical board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

Providing and fixing polyvinyl chloride (PVC) Door frame size 18 x 50 mm with a wall thickness of 18 mm, made out of extruded 18mm PVC sheet and joined ith suitable Cement solvent adhesive and screw. The section are to be cut with a size 18mm x 50 mm and and the height according to the site. The door frame shall be fixed to wall using 75mm long M.S. screw through the frame by using PVC fasteners. A minimum of 3 Nos of screw to be provided for each vertical member & minimum 2 nos for horizontal member etc complete as per manufacturers specification & drawing and directions of the Engineer-in-Charge.

Providing and fixing 18mm thick SOLID PVC DOOR SHUTTER made out of 18mm Celuka Printed and UV coated sheet which is cut according to the size the cabinet or for Kitchen drawer, Almira etc similar works provided and the groove to be made on the one edge so that the overlapping could be done for double leaf door shutter. The Fixing is to be done by the 1.25'' M.S. screw to the Frame with the Channel hinges. Handle to be provided from outside of door complete the work according to the manufacturer's specification & drawing and directions of the Engineer-in-Charge.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters, aluminium section weighing 1.50 Kg/metre, side hung type, fixed at bottom with standard door spring, pintail etc including necessary jointing cleats, glazing clips, rubber packing, handle 2 Nos in each door, hinges, 02 Nos aluminium tower bolt 200 mm long and 01 No Mortise lock vertical type size 100 mm 4 levers of brass in each door, anodised aluminium snap beading screws etc, bottom panel of door fitted with 9 mm thick BSD prelaminated particle board, of aproved shade and 5.5 mm thick tinted glass ordinary quality in top panel as per manufactures instruction complete all as specified and directed. (NOTE: Quoted rate shall be inclusive of BSD pre-laminated particle board and 5.5 mm thick tinted glass)

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium sliding window with shutter styles 40 mm X 20 mm sheet thickness 1.5 mm with two shutters of glass and one shutter of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, window frame of size 100mm X 44mm X 1.5 mm thick section with our without rebate including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable peg stays, hinges and handles- 02Nos etc with 5.5 mm thick tinted/frosted glass ordinary quality as per manufacture's instruction complete all as specified and directed. (NOTE: Quoted rate shall be inclusive of stainless steel wire cloth and 5.5 mm thick tinted glass)

S&F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised decorative grills of size 75mm x 75mm having section width 6mm and 3mm thickness for aluminium windows, fixed on aluminium section weighing not less than 0.55 Kg/metre including all necessary jointing cleats, fixing clips complete all as specified and as directed.

Taking down aluminium door shutter, partition, aluminium sliding window and refixing the same with required cutting, re-adjusting and resizing of glass panes as per sitye condition complete all as specified and directed.

S&F in repair fabricated aluminium doors, windows, partitions and ventilators using aluminium anodised sections of size and type as directed by Engineer-in-Charge including joining cleats, snap beading etc complete all as specified and directed.

S&F rubber gasket of aluminium door, window and partition wall for fixing glass panes or prelaminated particle board etc. complete all as specified and as directed.

S&F in repair in double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with statinless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified incl taking down old floor spring complete all as specified and directed.

S&F in repairs aluminium (extruded section body) hydraulicaly door closer universal type designation No 3 suitable for door shutter of weight between 61 to 80 Kg fixed in repair including taking down old fitting complete all as specified and directed.

S&F in repairs mortice lock, vertical type 100mm dia size 6 levers complete all as specified and directed.

S&F 4.0mm sheet glass ordinary quality in aluminium, steel or wooden frame with putty in square n. exc 0.5 SQM in each pane complete all as specifed and directed

S&F 4.8mm sheet glass ordinary quality in aluminium, steel or wooden frame with putty in square n. exc 0.5 SQM in each pane complete all as specifed and directed

Supply and fixing in repairs 9mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber/aluminium frame work/partition all as specifed and directed

S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

-ditto- but including taking down of existing wire cloth

M&L mild steel bands and straps support or stays holdfast and similar articles conforming complete all as specified and directed.

Cutting holes in to brick wall for inserting Hold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, treating ends of posts, back of chowkhats etc, with tar or coal tar black paint, area tarred exc 0.1 sqm but n. exc 0.5 sqm each complete all as specified and directed.

-ditto- but treating small articles such as holdfasts, ends of posts, back of chowkhats, etc, area n exc 0.1 sqm each

Supply & fixing 75 mm mild steel butt hinges(medium weight) cold rolled complete all as specified and directed.

Supply & fixing 100 mm stainless steel butt hinges(medium weight) cold rolled complete all as specified and directed.

Supply & fixing 100 mm mild steel butt hinges(medium weight) cold rolled complete all as specified and directed.

S&F aluminium handle, cast type anodised 125 mm size complete all as specified and directed.

S&F aluminium handle, cast type anodised 150 mm size complete all as specified and directed.

S&F 125 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 300 mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repairs of brass skeleton tower bolts of length 600mm with cast brass plate and staples and rolled or drawn brass bolt and fixed complete all as specified and directed.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, length of cover plate 150mm, fixed to door shetters with screws complete all as specified and directed.

S&F in repairs floor door stopper of brass body, polished with rubber cap fixed to door shetters with screws complete all as specified and directed.

S&F brass decorative handles 150mm size fixed in repair all as specified and directed.

S&F in repair heavy weight brass decorative/moulded finished sliding bolt of 300mm long with hasp and staple (bolt type) fixing cleat of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded cast brass alloy complete all as specified and directed.

M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/SQM on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.

All as per Item No. 61 above but 0.50 mm thick coloured plain galvalume sheet as in ridge/valley gutter of roof.

S&F in repair fibre glass reinforcement translucent corrugated sheeting of 2mm thick with two corrugation side lap fixed with fixed with L type or J type or cranked hook bolts in roofs, walls etc complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of Red oxide, zinc chrome primer to new steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer-in-Charge.

S&F 10 to 12mm thick gypsum board false ceiling including 0.55mm thick GI perimeter channel, GI channel tray frame work having one flange of 20mm and another flange of 30mm with web of 27mm, fixed to surrounding wall using nylon sleeves and screws @ 450 mm centre to centre/GI intermediate channel of size 45mm x 0.90mm thick with two flange of 15mm each suspended from the soffit of roof slab/truss @ 1220mm c/c with MS angle of suitable size fixed to soffit of ceiling with GI cleat and expansion fasteners with and including ceiling section (not exc 1.2 metre length) of 0.55 mm thickness having kurled web of 50 mm and flange of 25 mm ecah with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel @ 457 mm centre to centre with necessary nuts and bolts and gypsum board screwed to ceiling section with stainless steel screws @ 230mm c/c including applying two coats of plastic emulsion paint over a coat of primer to exposed surfaces complete all as specified and as directed.

Supply and fixing in repairs 100mm wide decorative corner bead (of approved design) made of plaster of paris, fixed with screws all as specified and as directed by the Engineer-in-charge.

M&L False ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium snap grid to support the boards/files with aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides, fixed to ceiling with supporting hangar consisting of 6 mm dia mild steel rod, J bolts with necessary bolts and washers and anodised adjuster and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces complete complete all as specified and as directed. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of ceiling board)

S&F false ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on existing snap grid frame complete all as specified and as directed

Supply and Fixing PVC solid wall lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per manufacturer’s specification and instruction and as directed by the Engineer-in-Charge.

Supply and Fixing 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.

S&F in repairs Chromium plated 20mm dia chromium plated brass curtain rod with fixing brackets, stops, rollers etc of approved design complete all as specified and directed. (NOTE: Brackets will be measured and paid seperately)

S&F in repairs fancy type metal finish curtain bracket for single/double rods fixed to walls complete all as specified and directed

S&F in repair coloured (any) PVC seat cover for EWC of any description with hinging device complete all as specified and directed.

S&F in repair Plastic seat & cover, white, soft close type, for coupled water closet (of any description) incl chromium plated hinge complete all as specified and directed. (Make : PARRYWARE, Cat No: E8300 or equivalent model in JAQUAR / CERA / HINDWARE)

S&F in repair chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE, Cat No : T9941A1 / ESS ESS, Cat No: C-232Y / CERA, Cat No: F8030401AB / HINDWARE, Cat No: F160002)

S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No: TM-104 / CERA, Cat No: F2003201 / JAQUAR, Cat No: FLR-5053N / PARRYWARE, Cat No: G0607A1 / / PRAYAG, Cat No: 9316 / HINDWARE, Cat No: F280004)

S&F in repair 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed. (Make : Ess Ess, Cat No: TM-103C-203 / CERA, Cat No: F2003163 / JAQUAR, Cat No: FLR-5041N/ PARRYWARE, Cat No: G0634A1 / PRAYAG, Cat No: 9312 / HINDWARE, CAT No: F280003SCP)

S&F in repair Chromium plated brass Bib cock with wall flange, fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No: TM-102 / CERA, Cat No: F2003151 / JAQUAR, Cat No: FLR-5047N/ PARRYWARE, Cat No: G0604A1 / / PRAYAG, Cat No: 9306 /HINDWARE, Cat No: F280002SCP)

S&F in repair, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : ESS ESS, Cat No: TM-332 & E221 / CERA, Model: F200351 & F4050102 /JAQUAR, Cat No: FLR-5083NK & ALD-083 / PARRYWARE, Cat No : G0651A1 & G5052A1 / / PRAYAG, Cat No: 9318 & CPS-15/ HINDWARE, Cat No: F280027 & F850096)

S&F in repair Chromium plated brass Wall mixer, concealed type incl concealed body, with both overhead and telephone shower arrangement, fixed with 15 mm bore Iron pipe including taking down existing mixer complete all as specified and directed. (Make : ESS ESS, Cat No: TM-126 /CERA, Cat No: F2003403 / Jaquar, Cat No : FLR-5281N / PARRYWARE, Cat No: G0617A1 / / PRAYAG, Cat No: 9380 / HINDWARE, Cat No: F280022) NOTE: Telephone shower shall be measured and paid seperately.

S&F fancy type chromium plated telephonic hand shower, 3 flow with flexible tube and hook screwed for iron pipe including frame complete all as specified and directed. (Make : Ess Ess, Cat No: HS 203 / CERA, Cat No: F7030103 / PARRYWARE, Cat No: T9983A1/ / PRAYAG, Cat No: BHS-92 / / HINDWARE, Cat No: F160053 or equivalent model in JAQUAR)

S&F in repair 15mm bore chromium plated central hole basin mixer (premium quality) without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. (MAKE : ESS ESS, Cat No : C-211A / JAQUAR, Cat No : CON-167KNB / PARRYWARE, Cat No: G1414A1 / CERA, Model: OCEAN / PRAYAG, Cat No: 9250 / HINDWARE, Model: CONTESSA PLUS)

S&F in repair Chromium plated brass Pillar tap, fancy type. with areator, fixed to wash hand basin, complete all as specified and directed. (Make : Ess Ess, Cat No: C-201B / JAQUAR, Cat No: CON-021KN/ PARRYWARE, Cat No: G1402A1 / PRAYAG, Cat No: 9204/ HINDWARE, Cat No: F330002CP / Cera, Model: OCEAN)

S&F in repair chromium plated brass over head shower rose with arm (premium quality), with 3 flow, fixed to 15mm bore of iron pipe including taking down existing shower complete all as specified and directed. (Make : CERA, Cat No: F7040103 (for arm) & F7020305 (for shower) / PARRYWARE, Cat No: T9802A1 (for arm) & T9986A1 (for shower)/ESS ESS, Cat No: OH-104S / HINDWARE, Cat No: F160051)

S&F in repairs 15mm dia soap dish, square, acrylic body with chromium plated base complete all as specified and directed. (Make : Jaquar, Cat No : ACN-1131N / PARRYWARE, Cat No: T6403A1 / ESS ESS, Cat No: AC-703 / PRAYAG, Cat No: BA-35 or equivalent model in CERA /HINDWARE)

S&F in repair vitreous china floor mounted coupled closet (Pedestal pattern), coloured, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC coloured seat cover and connecting fittings including taking down existing water closet complete all as specified and directed. (Make : PARRYWARE, Model : Cascade NXT/ CERA, Model : CLAIR/ HINDWARE, Model: CONSTELLATION or equivalent model in JAQUAR)

S&F in repair 6mm thick bevelled edge mirror of size as required fixed on 6mm thick acrylic sheet board backing, fixed with chrpmium plated screws and cup washer complete all as specified and directed.

S&F in repairs Stainless steel kitchen rack of size 31" x 24" x 10" fixed in wall with screws and washer complete all as specified. (Make- Prayag , Model No- P-340 or equivalent model in SUYOG / BLUE STAR / ANUPAM INDUSTRIES)

S&F in repair corner glass shelf 300 mm with brass brackets, as in repair complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102/ ESS ESS, Cat No: AC-207A)

S&F in repair Chromium Plated glass shelf of size 460mm x130mm fixed to wall with Chromium Plated screws as in repair complete all as specified and as directed. (Make : Ess Ess, Cat No: AC-207 / JAQUAR, Cat No: AQN-7771 / PARRYWARE, Cat No: T6009A1 or equivalent model in PRAYAG / HINDWARE / CERA).

S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231 / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, Cat No: BEA-26)

S&F in repair acrylic bathroom cabinet box with mirror of size 622 mm X 422 mm size complete all as specified and directed. (MAKE: PRAYAG, Cat No: 555 or equivalent model in POLYTUF / JEXON / SHAKTI / NILKAMAL )

S&F in repair Shower panel with hand shower, 6 horizontal massage body jets and over head shower incl taking down old one complete all specified and as directed. (Make: Parryware , Model: Splash N / CERA, Model : Costa or equivalent model in HINDWARE )

S&F in repairs Mono block water pressure pump set of capacity 0.50 HP single phase , discharge range 36-60 Lpm , working in voltage range 220-240 V with operating pressure range 1.4 -2.4 (Bar) complete including with closed discharge valve and connected fittings complete all as specified and as directed . (Make: KILOSKAR - ETERNA, Model: SJPBS 42420-HL or equivalent model in CROMPTON / KSB / PARRYWARE)

Taking up or down existing 15mm dia steel tubing and connection and keeping saide for re-fixing or removal to store complete all as specified and directed

Taking up or down existing 20mm dia steel tubing and connection and keeping saide for re-fixing or removal to store complete all as specified and directed

Supplying, fixing, jointing and testing 15mm dia galvanised iron tube, medium grade with all fitting fixed to walls and ceiling or laid in complete all as specified and directed.

Supplying, fixing, jointing and testing 20mm dia galvanised iron tube, medium grade with all fitting fixed to walls and ceiling or laid in complete all as specified and directed

M&L for cutting chases for water tubing, pinning in making good to facing where required in cement mortar (1:3) to brick wall cutting girth n.exc. 10cm girth complete all as directed.

Supply and Fix in repairs vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0117 / HINDWARE, Cat No. 20004 / JAQUAR, Cat No. CNS-WHT-OP01 or equivalent model in CERA)

S&F in repair White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected items complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER )

Supply and fix in repairs Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON)

-ditto- all as per Item No. 100 here in before but 600mm long. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent model in JEXON)

S&F in repairs vitreous china (coloured) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK)

M&L for brick work using old size sub class 'B' fly-ash bricks straight or curved on plan exc 6 metre mean radius, built in cement mortar 1:6 complete all as specified and directed.

-ditto- but using old serviceable bricks retrieved from demolition

M&L in brick work using old size sub class 'B' fly-ash bricks straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 all as specified and directed

M & L for precast RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in cover slabs and the like including providing necessary form work etc, set in cement mortar (1:4) complete all as specified and as directed by the Engineer-in-Charge. (Note : Reinforcement to be measured and paid separately).

M & L for RCC type B1 1:2:4 (nominal mix) ( 20mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for use and waste for form work to sides and soffits of floor or roof beams , beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams for rough finished surfaces of concrete flat complete all as specified and directed

M&L TMT Bars 6mm to 8mm dia. dia and over, cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

M & L for 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded aggregate) as in floor , finished even and smooth without using extra cement complete all as specified and as directed

M&L light shade vitrified ceramic tiles 10 mm thick, coloured, (square/rectangular) polished, size 600mmX 600mm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured to match the shade of tiles, laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L light shade vitrified ceramic tiles 10 mm thick, coloured, (square/rectangular) polished, size 600mm X 600mm, as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured to match the shade of tiles over and including 10 mm thick backing layer in cement mortar 1:3 complete all as specified and directed.

M&L non skid ceramic 7 to 8 mm thick coloured tiles, joint free, (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment as in floor, laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L glazed coloured ceramic tiles in vertical surface 300 X 450 X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making moulds on edges laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M & L for heavy duty coloured ceramic floor tiles of size 300 x 300x 10 mm thick, suitable for high traffic external tiles, anti skid, scratch resistance and neutral to UV rays and acid alkali resistance as in floor including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. (MAKE : JOHNSON, Model : ENDURA or equivalent model in other makes listed in the tender)

M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/Paving etc, finished even and smooth using extra cement complete all as specified and directed.

Forming 12 mm thick expansion joints 150 mm thick filled with performed bituminious filler and top 30 mm primed and sealed with sealing compound grade " A " all as directed.

M & L for 20 mm thick plastering in two layers, 10 mm each in cement mortar 1:4 with water proofing compound (@ 200 ml per bag of cement or as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair ( upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separetly as "Supply only".

Supply only liquid water proofing compound

M&L 15mm thick cement plaster on brick or concrete walls in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L 5 mm thick cement plaster on ceiling surfaces finishing even and smooth without using extra cement in cement mortar 1:3 including necessary scaffolding complete all as specified and directed.

Preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment of old wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1.5 mm thick water proof wall care putty complete all as specified and directed. (Make of Waterproof Wall Putty : BERGER, Home shield or equivalent product in JK / BIRLA / ASIAN / NEROLAC)

M&L for preparing newly plastered wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1.5mm thick water proof wall care putty complete all as directed. (Make of Waterproof Wall Putty : BERGER, Home shield or equivalent product in JK / BIRLA / ASIAN / NEROLAC)

M&L for preparing newly plastered ceiling surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1.5mm thick water proof wall care putty complete all as directed. (Make of Waterproof Wall Putty : BERGER, Home shield or equivalent product in JK / BIRLA / ASIAN / NEROLAC)

M&L applying two coat of cement base paint over a coat of cement primer on newly plastered surfaces of walls including preparation of surfaces.

M&L Preparing new Surfaces of Walls and applying Two Coats of Exterior Emulsion Paint (as per Manufacturer’s instructions) over a coat of alkali resitant primer applied over 1.5mm thick water proof wall care putty for external surfaces complete all as specified and directed. (Make of Waterproof Wall Putty : BERGER, Home shield or equivalent product in JK / BIRLA / ASIAN / NEROLAC) (Make of Paint: Asian Paint (Apex Ultima) / ICI Dulux (Weather Shield Max) / Berger (Weather Coat All Guard) / Shalimar Paints (Xtra Maximum) / Nerolac (Excel Total)/ Jotun (Jotashield Water Xtreme)

M&L Preparing old decorated plastered surfaces of Walls by washing, rubbing down, stopping and applying One Coat of Exterior Emulsion Paint (as per manufacturer's specifications), complete all as specified and as directed. (Make of Paint: Asian Paint (Apex Ultima) / ICI Dulux (Weather Shield Max) / Berger (Weather Coat All Guard) / Shalimar Paints (Xtra Maximum) / Nerolac (Excel Total)/ Jotun (Jotashield Water Xtreme)

M&L for preparation of old wood and wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed.

M&L Preparation of old decorated plastered surfaces of wall or brick/concrete surfaces and applying one coat of plastic emulsion paint complete all as specified and as directed.

M&L Preparing old decorated surfaces of Walls and applying one coat of oil bound distemper, complete all as specified and as directed.

M&L applying one coat of Oil bound distemper on ceiling, cornices incl preparation of old plastered or unplastered surfaces complete all as specified and directed.

M&L applying one coat of cement base paint on walls, cornices incl preparation of old plastered or unplastered surfaces of wall complete all as specified and directed.

Taking up/down plants or vegtation growth wall upto roof level by means of cutting hole into brickwall and making good the surface of dismatled portion (not exc 150 sqm cm superficial area and not exc one brick depth) using brick bats/aggregate and plastering in cement mortar (1:4) to distributed portion and applying two coat of cement base paint to match existing surface up to forth floor complete allas specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plug washers, waste coupling and fixing cantilever brackets connecting union to pipe, overall size of sink 914 mm x 460 mm and bowl size 405 mm x 354 mm x 203 mm complete including taking down existing sink complete all as specified and directed. (MAKE : PRAYAG, Cat No. 1239-D or equivalent model in NIRALI/ DIAMOND/ ANJALI/ JAYNA/ BLUE STAR/ CERA/ PARRYWARE)

S&F in repair Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make : Ess-Ess, Cat No: AC-702 / JAQUAR, Cat No: ACN-1121BN / PARRRYWARE, Cat No: T6002A1 / PRAYAG, Cat No: BA-11 )

S&F in repairs toilet paper holder, surface type with flap incl taking down existing holder complete all as specified and directed. (Make : JAQUAR, Cat No : CAN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-38 / ESS ESS, Cat No: AC-706 / HINDWARE, Cat No: F880003)

S&F in repairs, Tubular towel rail (premium quality), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / ESS ESS, Cat No: AC-701 / CERA, Cat No: F5004103 / PRAYAG, Cat No: BA-20 / HINDWARE, Cat No: F840013 )

S&F in repairs towel rack (premium quality) with lower hangar with hook incl taking down existing rack complete all as specified and directed. (Make : JAQUAR, Cat No: AHS-1581H / ESS ESS, Cat No: AC-308 / PARRYWARE, Cat No: T6008A1 / CERA, Cat No: F5003101 / PRAYAG, Cat No: BA-12)

S&F in repair chromium plated brass jet spray with one metre PVC tube complete all as specified and directed . (Make : Essco, Cat No ALE-547/PRAYAG, Cat No: BEA-17 / JAINKO, Cat No: JSJ-1 )

S&F in repair Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141)

M&L for PCC (1:2:4) type-B1 (using 20mm graded crushed stone aggregate) as in flooring benching to drain, coping etc. and the like edge slightly rounded or chamfered angles and throating, as directed including necessary form work etc complete all as specified and directed.

M&L mild steel rolled sections as in main and cross beams, angle, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors etc conforming to grade Fe-410-0 or Fe-310-0 made to required shape and size, welded at joints complete all as specified and directed

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings Fe 410-W (Gde-E- 250) quality-B (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L Mild steel framed work such as grills of ornamental type, gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar works incl portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc confirming to grade Fe-290. Gde-E-165 complete all as specified and directed.

Material and Labour for applying one coat of white wash to old decorated surfaces of wall including preparation of surfaces (by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent, salts, trading oil and greasy spots) complete all as specified and as directed.

Material and labour for applying one coat of white wash to old decorated surfaces of ceiling including preparation of surfaces (by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent, salts, trading oil and greasy spots) complete all as specified and as directed.

M&L in repair Expanded metal cut to length bent to shap required and tying with and including annealed mild steel wire not less than 0.9mm dia weight n exc 4 Kg/Sqm or fixing with galvanised steel staples fixed to wooden of steel frame including rebating etc complete all as specified and directed.

S&F in repairs chromium plated round grating 100mm dia complete all as specified and directed.

Stripping of old tarfelt including layer of plaster of any description carefully from the roof surface (without damage to roof) and removing from site as directed including roughening surface of old concrete roofing by picking, sweeping, cleaning and washing down with the water to remove dust as directed.

M&L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 or cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregates) as required complete all as specified and directed.

M&L for brushing cement slurry @ 3 Kg/sqm over cleaned roof surface prior to application of concrete complete all as directed by Engineer - in - charge .

M&L 15 mm thick screed bed in cement mortar 1:3 over roof mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE: WPC will be measured and paid separately)

M&L for providing 25mm thick PCC (1:2:4) type 'B-0' (using 12.5mm graded crushed stone aggregate) mixed with water proofing compound @ 200 ml per bag of cement, surface finished even and smooth without using extra cement including complete all as a specified and as directed. (NOTE: Water proofing compound shall be measured and paid seperately)

M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying two coats of bitumen based UV reflective paint with aluminium finish @ 0.10 litre per sqm over APP membrane.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from trenches of 100mm internal dia complete all as specified and as directed

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from trenches of 150mm internal dia complete all as specified and as directed

S&F 100 mm dia Cast iron soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

S&F 100 mm dia Cast iron soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

S&F 150 mm dia Cast iron soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

S&F 100mm dia CI bends (any radius) complete all as specified and directed.

Chipping of unsound/weak concrete materials including cover plaster from RCC stuctural member i.e slabs, lintal, chajja fin, facia etc. 25mm average thickness including tapering all edges, making square shoulders of cavities air and cleaning of exposed concrete surface of lightly picking materials by manual method including foreign material, loose concrete/ aggregate etc and disposal of all debris out side of MOD land and complete all as specified and directed.

deduct/ add for below/ over 5 mm or part thereof thickness for item No. 167.00 here in before.

Supply, material and application of two component structural grade polymer modified reinstatement mortar of compressive strength, flexural strength shall not be less than 45 MPa at 28 days, 7 MPa at 28 days respectively (maximum coverage area 1.30 sqm per 25 kg pack @ 10mm thickness) over a coat of epoxy bonding agent on existing surface for strengthening of beam, columns and other structural elements of average thickness 25mm and mortar shall be applied in layer n.exc 6mm thick in layer and including surface prepration as per manufacturers instruction complete all as specified and directed. (Any storey / height of building/ structure) Note:- (Polymer modified reinstatement mortar) :- Renderoc S2 of FOSROC or equivalents solutions SIKA/STP as approved by GE)

Material, labour and applying of high efficiency polymeric resin base film forming curing agent/compound over concrete surface and maximum coverage area 5.00 sqm per litre as per manufacturees instruction complete all as specified and directed. (Any storey/ Height of building/ structure) (MAKE:- Concure LP90 of FOSROC or equivalents solutions SIKA/STP/ PIDILITE/ CHOKSEY as approved by GE)

S&F in repair Cast iron work grade FG 150, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles (weight n exc 5 kg each) complete all as specified and directed.

ARATI TRADING CO

dutta and dutta

UNIVERSAL TRADING CENTRE

H D CONSTRUCTION

S.M.CONSTRUCTIONS

KWALITY CONSTRUCTION

ARJUN DAS VALECHA

M/S RAJ CONSTRUCTION AND COMPANY