Installation of two number Hexagonal cross arm fabricated in steel tubular pole for lighting at coal stock 49 and lighting arrangement in 44 number coal stock by erecting of 11 mtr tubular pole with led lights under Magadh-OCP M-S Area

Erection of metallic pole of length above 10mtr and upto 12 mtr in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Supply of 50 mm x50 mm x 6 mm angle & 16 mm plate & fabrication of same for hexagonal cross & base of pole like cutting,welding,drilling etc

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required for Tensioning of Conductor where required.during changing of damaged insulators or changing of cross arms

Erection of angle Iron/channel iron cross arm on wood/RCC/PCC/steel tubular or Rail pole for 4 wire system.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Erection of angle Iron/channel iron cross arm on wood/RCC/PCC/steel tubular or Rail pole for 2 wire system.

Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required .

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required.

Supplying and erection of stay set complete (galvanised) with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

11/12 metre steel tubular pole Painting with aluminium paint of approved brand and manufacture to give an even shade.Two or more coats.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker single pole and neutral for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 A, 16 KA,FPMCCB

Supplying and fixing of following ways surface/recess mounting,vertical type,415V,TPN MOB distribution board of sheet steel,dust protected,duly link,earth bar,din bar for mounting MCBs(but without MCBs and incomer)as required.(Note:Vertical type MOBTPDB is normally used where 3 phase outlets are required.) way (4 + 12), Double door Each

Providing of 16 sq mm 4 coreisi marked,upto 1.1 kv grade Alluminium armouredcable for laying service wire

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of size not exceeding 35 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. As required

Earthing with copper earth plate 600 mm X 600 mm X 3mm thick including accessories,and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.with charcoal/coke and salt as required.

Providingand fixing 25mmX5mm G.I.strip in 40mm dia G.I.pipe from earth electrode including connection with G.I. nut,bolt,spring,washer excavation and re-filling etc.as required.

Total impact of GST for the purpose of CTC

Please Enable Macros to View BoQ information