Setting up of 02 Nos. end to end solution based Digital Studio

Amount

Full HD 1080p PTZ Camera, 20 x optical Zoom , Desktop, HDMI out, IP Based Camera Control

Full HD 1080P Video mixing, Switching, Recording and Streaming console. Input-2 HDMIU, 4 SDI and Output-1 Multi viewer, 1 PGM, DS Card Recording, You Tube, Facebook direct streaming

Hand Writing Extraction, Teacher Writing on normal white board will be extracted alongwith Teacher video in overlap with single camera

Chroma Key-less application for Video recording studio. No need of Green mask, with back drop of any image, PPT or Video of live video capture from Camera

Camera Joystick remote control

8 input digital audio mixing console

Wireless Microphone Hand held

Acoustic Speaker

Amplifier

48" LED TV

65" LED TV

PC Server with NAS Drive for Video file store and editing

Gooseneck Mic

Lapel Mic Note:- All the rates should be quoted including cost of cabling and connectors as required at site while execution of work.

Manpower for operating Digital Studio for 02 years

CIVIL WORK Supplying and Fixing Acoustic False Ceiling of Sound Dampner 12mm made of compressed Wood Fibre made with inorganic compound with mat black colour size 1218x1218mm installed on VIB Curb hanger with Engineered Wooden Studs and infill of Absorb Wool 50mm 1000GSM for excellent Results.Supplying and Fixing ‘APHONY FIBRETTE ‘ tiles made of Wood Fibre 1mm width cement composites 15mm thick with an option of colours as per the choice of the Architect/ person in charge of size 595x595 mm . Has excellent noise absorption of 1 NRC as per ISO: 354-1985 and ASTM 423-90 a, Density 400 Kg/ m3, meets stringent Fire Ratings ASTMD-876 and Fire Class -1 as per BS 476 part 5 and 6,Class P-not easily ignitable as per BS-476-Part 5 (Ignitability for material).This is applicable for core and class 1 as per BS 476-Part 7 (Method for classification of surface spread of flame) , weather resistance as per IS 3308, Thermal Insulation as per IS:3346-1980 with relative humidity of 90% RH at 60o Celsius(140o Fahrenheit) for 15 days= No deterioration. Conforms to En 131682001 and are RoHS Complaint. Can be installed on T24 grid system of 0.6mm thick Main ‘T’ length minimum 3000mm, web minimum 35mm to be placed at 600mm centre to centre and secondary cross ‘T’ of length 600mm web minimum 35mm inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise,Specially designed for Acoustic Vibration management and long life with a backing of HIMALYAN ACOUSTICS 50mm 1000 GSM thick absorbwool tested as per Fire Retardant ASTMD 635-1991 and IS 15061-2002 for excellent results.

Supplying and Fixing Acoustic Wall Panneling of Sound Dampner 12mm made of compressed Wood Fibre made with inorganic compound with mat black colour size 1218x1218mm installed on VIB Curb hanger with Engineered Wooden Studs and infill of Absorb Wool 50mm 1000GSM for excellent Results.Supplying and Fixing ‘APHONY FIBRETTE’ tiles made of Wood Fibre 1mm width cement composites 20 mm thick with an option of colours as per the choice of the Architect/ person in charge of size 600X1200 mm with taper edge. Has excellent noise absorption of 0.70 NRC as per ISO: 354-1985 and ASTM 423-90 a, Density 400 Kg/ m3, meets stringent Fire Ratings ASTM D- 876 and BS:476 , weather resistance as per IS 3308, Thermal Insulation as per IS:3346-1980 with relative humidity of 90% RH at 60o Celcius(140o Farenhite) for 15 days= No deterioration. Conforms to En 131682001 and are RoHS Complaint.

Supplying and Fixing of ISO Board 12mm on Floors made of compressed Wood Fibre made with inorganic compound with mat black colour size 1218x1218mm installed on Engineered Wooden Studs and infill of High density insulation for excellent Results.3" PCC will spread over the Board to be done by the Client.

Supplying and Fixing of Acoustic Door of 56 mm having an STC rating up to 50. The Door will be filled with high acoustic materials of 2 layers of 8 mm Water Proof Acoustic Ply with Dampner Sheet, 2 Layers of 10mm thick Absorb Wool 300 GSM, Sound Dampner 12mm 1218x1218 mm made of 10 mm compressed wood cement composites 1250Kg/m3 and 2mm dampner sheet 37 STC as per ISO 140 ( partIII) - 1995. Final Finish with Teak Ply 4mm thick interior and Exterior Side. The door frame will be made of Engineered wood/ teak wood . Frame on all four sides or three sides frame and drop seal below will be provided along with the door. High load-bearing hinges will be provided along. Fire-resistant for 120 min as per IS 36 (4 Part -II) & (Part 20 & 22).Door Accessories:Door Closer, Door H-Type Pull Handle, & Outdoor Liver ( Trim Lock).

Providing and fixing Cut pile tufted Carpet flooring made of 100% BCF heatset nylon, Dyed by Chromojet injection dye with a tufted weight of +/- 800 G/SQM , and a total weight of 2000 G/SQM with primary backing in woven polypropelene and secondary synthetic action back. Approved Makes:Wellspun, Goldface ,Interface

Providing and fixing Fiber cement board 75mm thick drywall partition system, which include Galvalume wall frame system, comrprising of 51mm Floor and Ceiling track profile, 0.5mm thick, having two equal flanges of 32mm, fixed to the floor and ceiling,in plumb with each other, with nylon sleeves and steel screws at 610mm; Vertical Galvalume studs of size 51mm, 0.5mm thick, having one flange of 42mm and another flange of 44mm and two equal lips of 5mm insert fixed into the track profiles at 610mm centres. 12mm thick Fibre Cement Board (confirming to IS 14862;Type-B, catagory-3) are then screw fixed on the either side of the framework, with 25mm Screw Fibre Cement screw, at 300mm centres.The joints of Fibre cement board are to be filled with jointing Compound. The rate shall include providing openings for windows glazing and doors with additional support, wherever required. all complete as per direction of Engineer-in-charg

Providing and fixing mineral fibre false ceiling tiles at all heights With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish

Closure of all existing windows by way of taking out windows & doing half brick masonry in cement mortar 1:3 , and then plastering the brick surface with Cement mortar 1: 4 Complete job

Providing and fixing powder coated 50 microns aluminum work (10 gauge) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminum sections shall be smooth, rust free, straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For frames and shutter of door windows & ventilators/Sliding shutters including providing and fixing hinges/pivots, handles, tower bolts, eye hooks/window stays, including the cost of PVC/neoprene gasket 5mm glass panes/12mm laminated board on both sides, hydraulic door machine where ever required complete job as required. The Spacing of Vertical members not to exceed 4’-0” & section to be used is 104 mm x 44.45 mm

ELECTRIC WORK Wiring for light point/fan point/ceiling fan point/exhaust fan point/call bell point with 1.5 Sq. mm FRLS PVC insulated, copper conductor cable in surface/recessed medium class PVC conduit, with piano type switch, phenolic, laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq mm. FRLS PVC insulated copper conductor single core cable etc. as required. (Wire Make ISI Marked Havells/Anchor /HPL ) (Conduit Make - ISI Marked Anchor/High Power /AKG) Group ‘C’

Re-wiring for light point/fan point/call bell point exhaust fan point with 1.5 Sqm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/ PVC conduit including dismantling as required. (Wire Make ISI Marked Havells/Anchor/ HPL/KEI/Polycab) (Conduit Make - ISI Marked Anchor/High Power /AKG) Group ‘A’

Wiring for circuit/sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. (Wire Make ISI Marked Havells/Anchor/HPL) 2x1.5 +1x1.5 Sq mm

-------------do--------------- 2x2.5+ 1x2.5 Sq mm

----------------do------------------ 2 x 6 + 1 x 6 Sq mm

Supplying and fixing 5 amp to 32 amps rating, 240/415 volts, 10 KA C curve miniature circuit breaker of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make Havells /Anchor/ C&S//HPL) Single pole

Supply and fixing of metal Box of following size on the surface/recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 100mm x 100mm x 60mm deep

-----------------do------------------- 180mm x 100mm x 60mm deep

Supply & fixing 15/16 amp piano type switch on the existing switch box or cover including connection as required. (Make: Anchor/Havells /HPL/Great White/Sanchi major)

Supply & fixing 6 pin 15/16 amp socket outlet on the existing switch box or cover including connection as required (Make: Havells/ HPL/ Anchor/Great White/Sanchi major)

Supply & fixing 5/6 amp piano type switch on the existing switch box or cover including connection as required (Make :Havells/ HPL / Anchor /Great White Sanchi major)

Supply & fixing 3 pin 5/6 amp socket outlet on the existing switch box or cover including connection as required (Make: Havells/ HPL / Anchor /Sanchi major/Great white)

Supply & fixing two module stepped type electronic fan regulator on the existing modular plate/switch box including connections but excluding modular plate etc. as required. (Make Havells/ HPL / Anchor /SSK/ C&S/Great White/Sanchi Major)

Supplying and fixing brass batten/Angle holder including connection etc. as required. (Make Havells/ HPL / Anchor / C&S/Great White/ Sanchi Major)

Supplying and fixing 3 pin, 5 A Ceiling Rose on the existing junction box/wooden block including connection etc. as required. (Make Havells/ HPL / Anchor /SSK/ C&S/Great White/ Sanchi Major)

Supplying and fixing of following ratings and poles 240/415 volts Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required (Make Havells /Legrand /Anchor/ C&S/L&T/ Siemen /IA/HPL/Standard) 40 Amp 240 volt Double Pole.

------------do-------------- 63 Amp 415 volt Four Pole Isolator.

Supply &Installation of following type of surface mounted/recessed mounted decorative Indoor straght Linear energy saving , energy efficient LED Lumainiers complete with connection testing and commissioning. Make (Halonix/ Havells//Bajaj/Greatwhite/ Philips/ HPL/Wipro/Compact) 4 feet long 18 to 22 watt, 230 volts LED batten type tube light fitting complete.

-----------do------------ b. 12 To 18 Watt LED recessed/surface mounting 6500 K, 240 Volts,6000K,75,cool white down light fittings/lumaineres square or round (225x225)mm to (300x300)mm Dimensions.

Supply, installation, testing, commissioning of 1200 mm sweep ceiling fans complete with blades BEE 4 to 5 star rated energy efficient including the cost of fan down down rod where required.(Make: Havells /Anchor/Bajaj /Compact)

Supply, installation, testing, commissioning of 300 mm sweep BEE 4 to 5 star rated energy efficient exhaust fan. Make: ( Anchor/Havells/Bajaj/Crompton)

P/F following rating 230 volts energy saver LED bulbs (Make :Philip /Havells/Bajaj/ Surya/ Crompton/ Wipro/Compact/Halonix) 8 to12 watt

Providing/fixing 40 amp rating , 230 volts SPN MCB in the existing MCB DB or enclose complete with connection testing and commissing complete Job. (Havells/Anchor/HPL make)

Providing/fixing Ding Dong wall bell including connection as required (Anchor/HPL/Klick)

Supplying and fixing following ways and poles, plain/horizontal sheet steel MCB Distribution Board on surface/in recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections including powder painted earthing etc. as required (But without MCB/RCCB/Isolators. Havells/Anchor /I.A /HPL) 8 way(4+24), Double door

S/F D.P. sheet steel enclosure on the surface/ recess along with 25/32 Amp 240 volts ‘C’ curve DP MCB complete with Connection testing and commissioning etc.as reqd. (Make Havells/HPL /Anchor)

Providing and fixing following rating and breaking capacity MCCB with Thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Make Anchor /Havells /HPL/I.A) 315 AMP 3KA TP MCCB

Design, manufacture, testing at works & supply, installation, testing & commissioning cubicle panel floor mounted (on base frame) totally enclosed and extensible type . The general construction shall comprise to IS 8623-93. The design shall include all provisions for safety of operating and maintenance personal. IP 42 for indoor and IP54 for outdoor, shall be compartmentalized type having space and arrangements for I/C. cable/bus ducting/incoming switch gears, bus couplers, insulated and properly supported compartmentalized switch gear, outgoing compartmentalized switch gear, bus bar support and terminations, interconnection between bus bars & switch gear with auxiliary bus bars/insulated conductors/strips etc. The panel shall be fabricated out of CRCA not less than 2.00 mm thick for the load bearing members and 1.6mm for doors of L.T Panels. The frame work may be Agle Iron/Channel/Bolted type construction should be arrangement for I/C/O/G. Cable termination with 2 Each. 20x5mm cu. Strip fixed all around the panel connected to 2 Each. earth bars cu-strips connected to incoming earth conductor. (Make Electric Field/ Bharti Engineers/Gupta & Friends/ Jai maa/KED/D.V. Electromatic(P) L.T.D MAIN NORMAL CUM EMRENGECY a. INCOMING Space for 1to2 No. 100-630 Amp MCCB 35 KA b. INDICATING PANEL The indicating panel of the incomer shall be provided with the following: i. Ammeter of required range with ASS, CT's. ii.Voltmeter of required range with VSS. c. BUS BAR Space for 1 No. 100-630 Amp TPN Al. Bus bar of equal croos section for power/AC load cross section for power load. Space for 1 no 100-400 Amp TPN Al.bus bar of equal cross section for light/computers load. d. OUTGOING Space for 2 to 4 No. 63-200Amp 4 pole MCCB Dimensions = (3’x 3’x 1’6”)