WARD NO.46 PAHRIYA ANTARGAT SARANG CHAURAHA KE PASS PANCHKOSHI ROAD STHIT SARANG TALAB VIKAS SMITI KE SAMNE INTERLOCKING LAGANE V DINSHED NIRMAN KA KARYA

okMZ la0 46 igfM+;k vUrxZr lkjax pkSjkgk ds ikl iapdks'kh jksM fLFkr lkjax rkykc fodk'k lfefr ds lkeus b.Vjykfdax yxkus o fVu 'ksM fuekZ.k dk dk;ZA

Earthwork in cutting/filling and cartage upto 8 km away from site all complete( SOR-SI Cartage 231a+253 E/W)

Brick work in M-150 in 1:4 cement morttar with coarse sand etc all complet work

12 mm thick plaster with cement mortar consisting of 1 part cement and 3 part of approved coarse sand minimum thinckness with all com.

S/L of GSB site including consolidation water allawance etc materials and labour T & P etc all complete work

Supply & Laying of rubber moulded80mm thick CC interlocking pavor block with 30mm local sand & 40 mpa strenght etc all comp. ( GRAY )

Supply & Laying of rubber moulded80mm thick CC interlocking pavor block with 30mm local sand & 40 mpa strenght etc all comp. ( RED )

E/w excavation in foundaton in ordinary soil as per S.I. No-251

Providing cement concrete work in 1:6:12 cement, fine sand and 40 mm gauge brick ballast with all complete

Cement concrete with 20mm grit, approve coarse sand and cement in the proportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of the work.

S/F of RCC bench all cost complete.(Analysed)

R.C.C work in 1:2:4 with cement ,c/sand and 20 mm stone grit with all complete, SOR SI No. 284

Mild steel work or iron in plain for R.C.C work etc. all complete. SOR SI No.504

P/F mild steel or iron work in heavy sizes such as built up gate S.N. 3 REF 503 2020

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m² .DSR 2023- 12.1.2 (1257.55X0.735=923.89)

P/L of Innograution Bord at site all com.

Add GST @ 18%