Supply, Installation, Testing and Commissioning of 11KV Cable and RMU from NDMC sub-station to GPOA Netaji Nagar (PKG-II), New Delhi

Name of the work :- Supply, Installation, Testing and Commissioning of 11KV Cable and RMU from NDMC sub-station to GPOA Netaji Nagar (PKG-II), New Delhi

Laying of XLPE insulated 11 kV grade H.T cable of size 400 Sqmm. 3C direct in

1 8.1.2 ground including excavation, sand cushioning, protective covering & refilling the RMT 2450 577 1413650.00

trench as per specifications

Handling/Laying of XLPE insulated 11 kV grade H.T cables of sizes 400 Sqmm. 3C

2 8.4.2 which are not necessarily laid in ground but part of it going up to panel, RMT 50 115 5750.00

transformer & part in the building in open trench or otherwise

Drawing of XLPE insulated 11 kV grade H.T cables of sizes 400 Sqmm. 3C in

existing RCC/HDPE Pipe, closed duct, subway or Sub Station.

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I.

4 7.10 plate with inscription there on, bolted/welded to 35mmX35mmX6mm angle iron, Each 95 508 48260.00

60cm long and fixing the same in ground as required

Road cut of any thickness (metalled/concrete) for one HT cable

5 including its Relaying & restoration after comletion of cable work, compelete as

required at site and the direction of the Engineer In Charge

Supply of 11 kV HT XPLE Cable of size 400 Sq.mm 3C duly ISI marked and as per

technical specification

Supply and laying HDPE pipes ISI marked PN-6 class of size 125 mm dia (OD)

7 across Road /Service Road by trench less Technology in various Roads/ Service RMT 100 5662 566200.00

Road/ Main Gate.

Supplying and making of H.S. type st. Th. Joint Boxes suitable for H.T. XLPE 11 KV

cable of size 400 sq.mm/3C

Supplying and making of H.S. type indoor end termination kits suitable for H.T.

XLPE 11 KV cable of size 400 sq.mm/3C

Supply & installation of prefabricated hot dip galvanized steel ladder type cable

trays, (galvanization not less than 50 microns) including bends, tees & reducers

fabricated out of hot rolled sheet steel with rigid welded construction with a rung

as per standard and specifications, of approved make and cable tray fittings,

including all labour and materials, as per approved drawings,specifications of

this tender and directions of Engineer-in-charge

450 mm wide (Runners 25 x 75 x 25 x 2.5 mm and Rungs 20 x 30 x 20 x 2.5 mm 250

mm center to center.)

Supply, Installation , testing and commissioing of 11kV 630A Outdoor SF-6,

Manual, Non-extensible 3 way Ring main unit consisting of 2 LBS and CB

complete as required at site and as per the direction of the engineer-in-charge

11 Note: - A tentative details of RMU are provided with tender (Technical Each 1 440347 440347.00

Specifications) are for refrence only. The contractor has to prepare its GAD, SLD

and other etc. as per the requirment and to obtain its approval from NBCC and

NDMC before giving its manufecturing clearance to the OEM (As per the

apprroved list of makes)

Digitally signed by SAKET