Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.9 LAccepted-AOC BIRWAN BRIDGE UDHAMPUR J K 182104 | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182104 | L1 | Accepted-AOC Being reasonable and lowest | |
| 2 | L2₹42.6 L+₹13.7 L (47.2%)Rejected-Finance WARD NO 9 HOUSE NO 41 ARYA SAMAJ GALI UDHAMPUR 182 101 J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-Finance Not Being L1 |
Tender Value
₹27.5 L
EMD Value
₹55,000
Closing Date
13 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Sachin Sharma CWE
Military Engineer Services, Commander Works Engineer, Udhampur, PO - Garhi, Udhampur-182121
SPL REPAIRS OF ROAD AT PB ENCLAVE UNDER GE (NORTH) UDHAMPUR
2023_MES_579803_1
CWE/U(N)-88/2022-23
Open Tender
Civil Works - Roads
Item Rate
180 days
Udhampur
As per NIT
7 documents required · 7 mandatory
₹500
GE (North) Udhampur
₹55,000
Yes
27 Mar 2023
8 Feb 2023
18 Mar 2023
8 Feb 2023
13 Mar 2023
23 Feb 2023
Amount
Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dirt and mud of water sunken surface in roads, paths etc. cutting around edges to at least 25mm in depth making good by appling tack coat on bituminous surface with cationic bitumen emulsion RS-1 grade conforming to IS:8887 @ 5 Kg per Ten Square Metre, putting in Pre-mixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, binded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes exc 30 mm complete, all as specified and as directed by the Engr-in-Charge.
Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all loose dirt etc., and applying evenly a tack coat on existing black top surfaces with cationic bitumen emulsion SS-1 grade conforming to IS:8887 @ 5 Kg per Ten Square Metre and including Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix rolled and compacted to required camber and gradient, complete, all as specified and as directed by the Engineer-in-Charge.
Premix bituminous macadam with 4% paving using bitumen VG-30 paving grade ( 50 -70 penetration) bitumen binder, laid/rolled and compacted to required gradient and camber (consolidated thickness upto maximum 75mm), complete, all as specified and as directed by the Engineer-in-Charge. Note: Repair to pot holes any depth not exc 1 sqm each depression in patch over 50mm, shall also be carried out under this item.
Making trip straight line, zebra crossing and stop lines not less than 2.0 mm thick with hot applied thermoplastic road marking paint of approved brand (white or yellow) including admixture layer of glass beads confirming to BS-6088 and MOST specification by using automatic mechanical road marking machine including cleaning of all dirt, scales oil, grease and foreign material etc. complete, all as specified and as directed by the Engineer-in-Charge.
S&F in replacement ABS Engineering plastic stud (Cat Eye) dynamically designed having high impact strength and fitted with 2 Nos. highly reflective reflectors on both sides including fixing arrangements as per manufracturer's instructions, complete all as specified and as directed by Engr-in-Charge.
Speed bump of size 750 x 250mm & height 75mm (yellow / black colour) made of ABS material with two highly reflective reflectors molded in PMMA material are welded with ABS plates through Ultrasonic welding process, and the speed breaker shall be installed by the process as per standard manufacturer's instructions including taking out old speed breakers, complete all as specified and as directed by Engr-in-Charge.
M/S Inderjit Sharma and Co.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .