Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.7 LAccepted-AOC KATTI GHATI SHIV COLONY ALWAR ALWAR RAJASTHAN 301001 | ALWAR | RAJASTHAN | 301001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹20.5 L+₹4.2 L (25.9%)Rejected-Finance | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹21.5 L+₹5.2 L (32.0%)Rejected-Finance A 46 ARYA NAGAR ALWAR RAJ 301001 | ALWAR | RAJASTHAN | 301001 | L3 | Rejected-Finance BEING L3 | |
| 4 | L4₹22.3 L+₹6.0 L (36.9%)Rejected-Finance 60 MADHUVAN BANK COLONY ALWAR | L4 | Rejected-Finance BEING L4 | |
| 5 | L5₹22.4 L+₹6.1 L (37.6%)Rejected-Finance | L5 | Rejected-Finance BEING L5 |
Tender Value
₹20.0 L
EMD Value
₹40,000
Closing Date
21 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE HISAR
HQ CWE HISAR HISAR MIL STN HISAR
REPAIR/MAINTENANCE OF FANS, DESERT COOLERS AND CONNECTED WORK UNDER GE ALWAR
2024_MES_639941_1
CWE/HSR/ALW-46 OF 2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
ALWAR MILITARY STATION
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE ALWAR
₹40,000
13 Apr 2024
31 Jan 2024
23 Feb 2024
31 Jan 2024
21 Feb 2024
14 Feb 2024
Amount
Taking down unserviceable ceilin/exhaust/wallmounted fans 1200/450/300 mm sweep from various location, removing to workshop & back after repair, cleaning to remove any type of sticky dist with cleaning material as required and fixing in its original position after repairing, greasing, oiling, replacement of minor items such as split pins, terminal block etc as required for the under mentioned fans (winding and parts if required shall be measured & paid separately).
M&L Rewinding, overhauling and servicing of ceiling fans of size 48" (1200mm) sweep, 230 volt, 50 Hz, AC of any make by dismantling the fan, taking out existing stator, removing of burnt winding from stator and rewinding the same with super enamelled winding wire of existing size, varnishing of winding, oiling of bushes, including leth work and greasing of bearings repair the fan including S/F necessary minor spares/items like PVC insulated copper wire of required size,screws,nuts,bolts,spring washer etc and reassembling, cleaning and testing all as specified and directed by the Engineer-in-charge.(If any parts to be replaced shall be paid under respective items as supply only) Note : Repairable fans shall be collected by the contractor from the AGE E/M fan store and shall be deposited to AGE E/M fan store after necessary repairs. Necessary transportation charges shall be deemed to be included in the qutoted rate and to be paid by the contractor to the transport agency .
All as per item No 2.00 here- in above but Exhaust fan of size 18" (450mm) sweep
All as per item No 2.00 here- in above but Exhaust fan of size 12" (300mm) sweep
All as per item No 2.00 here- in above but air circulator wall mounted fan of size 18" (450mm) sweep
Supply only the following accessories/spares of ceiling fan/Exhaust fans:- Fan capacitor 2.5 Mfd 400/440V AC,50 Hz of Make Epcos/Havells/Tibcon
Supply only the following accessories/spares of ceiling fan/Exhaust fans:- Fan capacitor 4 Mfd 400/440V AC,50 Hz of Make Epcos/Havells/Tibcon
Supply only the following accessories/spares of ceiling fan/Exhaust fans:- Gun Metal bush of suitable size for ceiling fans of any make and any size.
Supply only the following accessories/spares of ceiling fan/Exhaust fans:- Ball Bearing No 112/6201 of make NBC or equivalent in make SKF/FAG/TATA all as directed
Supply only the following accessories/spares of ceiling fan/Exhaust fans:- Ball Bearing No 115/6202 of make NBC or equivalent in make SKF/FAG/TATA all as directed
Supply only the following accessories/spares of ceiling fan/Exhaust fans:- Ball Bearing No 117/6203 of make NBC or equivalent in make SKF/FAG/TATA all as directed
Supply only the following accessories/spares of ceiling fan/Exhaust fans:- Ball Bearing No 117/6204 of make NBC or equivalent in make SKF/FAG/TATA all as directed
Supply and fixing as in repair Fan Regulator electronic rotary step type and socket suitable for ceiling fan of sweep 1200/1400 mm complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing as in repair heavy duty 'H' clamp complete with rubber real, bolt nut, split pin complete all as specified and directed by the Engineer-in-Charge
Supply and fixing as in repair Upper & lower canopy (PVC) suitable for 1200mm of Make Crompton/Kessells/GEC/Orient/Usha (set of 2 i.e upper and lower)
Supply and fixing as in repair metallic Fan blade suitable for 48"/56" sweep ceiling fan (As per site reqd )
Supply and fixing as in repair Down Rod from Hanging Point to Ceiling Fan base upto length 1 meter suitable for 48"/56" sweep ceiling fan (As per Sample/site reqmt)
Supply and fix in repair Exhaust fan PVC body of size 8" (200mm) sweep,230 Volt,50Hz with blades, frame and louvers as per directed by Engineer-in-Charge .Make Havells/Orient/CG/Usha
Supply only in repair Steel shaft suitable for ceiling fan/Exhaust fan/wall mounted fan of any make/model with necessary works (Cutting,grouting,lathing finishing etc) all as specified and directed by the Engineer-in-Charge.
M & L for submain wiring alongwith earth wire with the 2x6.0 sq. mm +1x6.0 sq. mm earth wire sizes of FRLS PVC insulated and unsheathed copper conductor, single core cable in recessed in PVC rigid non metallic concealed conduit of adequate size medium duly ISI marked to be terminated as required including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment all as specified (Note: Two runs of cable with one run of earth wire and one run of PVC Coundit shall be measured as one length)
S & F in repair PVC connection clamp to electric connection for ceiling fans complete all as directed by Engineer-in-Charge
M&L for painting to desert cooler of any size complete after scrapping of old painted surfaces, removing the scaling etc and preparing the surfaces and painting with one coat of smoke grey synthetic enamel paint by spray painting on outer all sides of body and painting with rubber paint on inside surfaces of cooler tank and body complete all as directed by Engineer-in-charge.
S&F desert cooler fan motor complete 20" sweep 1350 RPM, 230 Volt, 50 C/S with blade of Make - Khaitan / Usha /Havells including taking down existing unserviceable fan motor complete all as directed.
S&F plug top 3 pin 5/6 Amp 230 volt AC, ISI marked, complete, fixed in repairs. Make : Anchor/HPL/Standard
S&F plug top 3 pin 15/16 Amp 230 volt AC, ISI marked, complete, fixed in repairs. Make : Anchor/HPL/Standard
S&F in repairs aluminium fanblade 20 inch sweep suitable for fanmotor of desert cooler, including taking out of u/s fanblade of any capacity complete all as specified and directed.
S&F in repairs PVC fan blade 20 inch sweep suitable for fanmotor of desert cooler including taking out of u/s fan blade of any capacity complete all as specified and directed.
S&F in repair wood wool pad size 30" x 31" including taking out u/s items complete all as specified and directed.
S&F in repair wood wool pad supporter of overall size 29"x30" made of GI Strip, including taking out u/s items complete all as specified and directed.
S&F in repair water lifting pump suitable for desert cooler submersible type including taking out u/s items complete al as specified and directed of Make - Khaitan / Polar/ Bajaj.
S&F in repair PT switch 5/6 Amp, 230 Volts, 50Hz AC, including taking out u/s items complete all as specified and directed. Make : Anchor/Roma/Havells.
Sealing compound in 75 gm packet , Make - M-Seal.
S&F in repair Air grill made of GI sheet 18 SWG suitable for 20" sweep desert cooler, including taking out u/s items complete all as specified and directed.
S&F in repair service lead (4 meter long) PVC insulated copper conductor 3 core size 23/0.0076 with & including 6 Amp Plug top, including taking out u/s items complete all as specified and directed.
S&F in repair PVC pipe 15mm bore heavy duty high density complete.
S&F in repair Iron leg (Set of 4) including taking out u/s items complete all as specified and directed.
S&F in repair Iron ring suitable for fan motor, including taking out u/s items complete.
S&F in repair Nut & bolt of any size/type including taking out u/s items complete.
S&F in repair PVC 3-way distributors with supporting Elbow for 15 mm bore pipe, including taking down u/s items complete.
M/S GAURI CONSTRUCTION
M/s ASK Enterprises
M/S JINDAL ENTERPRISES
GAR CONSTRUCTIONS
Radhe Krishn Engineering
Radha Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .