WBPWD/AE/NRSH/NIT-23/25-26_2

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc.complete in all respect including cost of necessary fitting as required, jointing materials and two coats of painting with approved paint in any position above ground.( Payment will be made on the center line measurements of total pipe line including all specials. No seperate payment will be made for accesorie, specials.).

For exposed work.

15 mm dia.medium quality.

Supplying, fitting and fixing shower of approved brand and make.

Hand shower(Health Faucet) with 1mtr Fexible Tube with wall Hook (Equivalent to code No.573 & Model-ALLIED of Jaquar or Similar)

PTMT overhead shower (prayag or equivalent )

75 mm round .

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I marking with fittings(tested to 21 kg per sq.cm.). (Note: Item (vii),(viii) and (ix) to be done as per specific direction of the Engineer-in-charge).

Supplying, fitting and fixing bib cock or stop cock.

Chromium plated Bib Cock short body (Equivelent to Code No.511 & Model- Tropical /sumthing special of ESSCO or Similar brand).

PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent)15 mm

Polythene Bib Cock/ Stop Cock (HD) with metal inlet(EMCO/ ATLAS or equivalent). 15 mm.

Supplying, fitting and fixing PVC pipes of approved make of of Schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pi;es as per IS:1239 (Part-I) with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting piles, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials. Payment for painting will be made seperately).

For Exposed Work PVC Pipes.

15 mm dia.

For Exposed Work PVC Pipes.

For Exposed Work PVC Pipes.

For Exposed Work PVC Pipes.

For Exposed Work PVC Pipes.

Supplying, fitting and fixing CPVC (Chlorinated PolyvinylChloride) pipes of approved make conforming to IS-15778:2007 . with all necessary accessories, specials viz. socket,bend, tee, union, cross, elbo, nipple, longscrew, reducingsocket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, fitting, fixing etc. completein all respect including cost of all necessary fittings asrequired,jointing materials in any position above ground.(Payment will be made on the centre line measurements oftotal pipe line including all specials. No separate paymentwill be made for accesories, specials.(a) For Exposed Work

For exposed work

(i) CPVC Pipes Class-I,SDR-11

15 mm dia.

For exposed work

(i) CPVC Pipes Class-I,SDR-11

Supplying, fitting and fixing low-down cistern parts.

Internal fittings for cistern complete of approved make.

Rubber Kid.

Outlet Assembly.

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 .

Single socketed 3 meter length.

Single socketed 3 meter length.

Double socketed - 0.9 m.length.

Fittings.

Plain tee.

Fittings.

Plain tee.

Fittings.

Door Tee.

Fittings.

Door Tee.

Fittings.

Door Bend (T.S).

Fittings.

Door Bend (T.S).

Fittings.

Pipe Clip.

Fittings.

110x110 P Trap. 75mm..

Fittings.

Cleaning pipe. .

Fittings.

Cleaning pipe. .

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any foor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Enginer-in-charge) Payment will be made on centre line measurement of the total pipeline including specials.).

Above ground.

110 mm dia.

Above ground.

160 mm dia.

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).

530 mm X 410 mm.

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.

With 'P' trap.

With 'S' trap.

With 'P' trap (with vent).

With 'S' trap (with vent).

Supplying, fitting and fixing Flat back urinal (half stall urinals) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.

470 mm X 280 mm X 340 mm.

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws supplied, fitted and fixed complete.

Plastic (hallow type) white.

Anglo-Indian .

Plastic (hallow type) white.

Polythene Flush Pipe.

Supplying, fitting and fixing bevelled edge mirror 5.5 mm thick silver red as per I.S. 3438/1965 together with brass C.P. hinges.

600 mm X 450 mm.

Supplying, fitting and fixing soap holder.

PTMT (Prayag or equivalent).

Supplying, fitting and fixing towel rail with two brackets.

C.P. over brass.

25 mm dia. and 600 mm long.

Aluminium .

25 mm dia. and 600 mm long.

Cleaning I.P.W.C. with acid.

Cleaning E.P. or Anglo-Indian W.C. with acid.

Removing chockage of water closet.

Removing chockage of urinals and waste trap.

Wash basin white vitreous china of approved make (without fittings) supplied, fitted and fixed in position on 75mm X 75mm X 75mm wood blocks and C.I. Brackets including two coats of painting of C.I. Brackets.

550 mm x 400 mm size.

Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.

Sink only.

530mm x 430mm x 180mm.

Supplying, fitting & fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P.nut, 15mm dia.

450mm long.

600 mm long.

Supplying, fitting and fixing approved brand 32mm dia P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.

900mm long.

Supplying, fitting and fixing Waste fittings complete.

C.P. over brass.

32 mm dia.

Polythene.

32 mm dia.

Supplying, fitting and fixing pillar cock of approved make.

CP Pillar Cock-15 mm. (Equivalent to Code No.507 & Model-Tropical/Sumthing Special of ESSCO or similar brand).

PTMT Pillar Cock-15 mm. (Prayag kor equivalent).

Making one set of scaffolding only for replacing glass panels, painting,uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge.(This item should be executed only after prior approval of the Engineer-incharge).Firstly, one number to be paid and then labour rate for shifting up tofurther nineteenth (19) times @ 10% each time to be considered. If necessaryfurther after twenty times of total use, another one number new and labourrate for shifting to be considered accordingly.

15.0 metre height

Shifting

Supplying, fitting and fixing pillar cock of approved make.

C.P. Pillar Cock with 200 mm extended Lever Handle (Equivalent to Code No.5031 & Model-FLORENTINE of JAQUAR or similar brand).

Please Enable Macros to View BoQ information