Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹31.7 L+₹1.1 L (3.61%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹34.3 L+₹3.7 L (11.9%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹34.8 L+₹4.2 L (13.8%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹35.8 L+₹5.1 L (16.8%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹40.0 L
EMD Value
₹79,980
Closing Date
7 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Gwalior
Garrison Engineer Gwalior, Morar Cantt Gwalior
8883/GWL/E8 CERTAIN REPAIR IN NCC OTA UNDER GE GWALIOR
2023_MES_612965_1
8883/GWL/E8
Open Tender
Civil Works
Works
335 days
Garrison Engineer Gwalior
Please ref tender documents
9 documents required · 9 mandatory
₹500
Garrison Engineer Gwalior
₹79,980
Yes
9 Nov 2023
9 Aug 2023
11 Sept 2023
9 Aug 2023
7 Sept 2023
24 Aug 2023
Amount
Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.
Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.
M&L for vitrified ,coloured and printed tiles of 9 to 10 mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 Sqm as in flooring over and including 15 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.
M&L for vitrified ,coloured and printed tiles of width as directed and 9 to 10 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:3) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.
M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set over and including 15 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.
M&L ditto item above for ceramic tiles, joint free, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:3 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.with the colour of tiles complete all as specified and directed.
M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7 to 8 mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.
M&L for non skid Joint Free ceramic Coloured tiles, 300mmx300mmx 7 mm to 8 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar( 1:4) complete all as specified and directed.
M&L Granite slab 16 mm to 18 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing all as specified and directed..
M&L for machine cut Kota stone slab 20mm to 25 mm thick , as in flooring , laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing , over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:3 ) complete all as specified and directed.
M&L for machine cut kota stone slab 10mm -15 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:3) complete all as specified and directed.
Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed.
M& L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius, in half brick work built in cement mortar 1:4 complete all as specified and as directed.
Demolition of cement concrete of any description and in any position (unreinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.
M&L for PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete, complete all as specified and directed.
M & L PCC (1:2:4) Type B1 using 20 mm graded stone aggregate as levelling course/mass concrete complete all as spd and directed.
Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed.
M&L for cement concrete ( 1:2:4) type B-1 (20mm graded agrregate) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed.
S&F for machine pressed precast Coloured concrete Tile with grey cement and no pigments .( Rubber mould casted Glossy finish) size 300x300mm of 25mm thick over 20mm thick CM (1:6) screed bed complete all as specified and directed
Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc.complete.
M&L for 15 mm thick rendering in cement mortar (1:4) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed.
M & L for two coat of oil bound distemper over a coat of Birla wall care putty on plastered surfaces on wall incl. preparation of surfaces complete all as specified and directed. .
Material and labour for Preparation of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed by Engineer -in-Charge.
Material and labour for Preparing of old decorated surface of Ceilings of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed by Engineer -in-Charge.
M&L complete removal of existiong treatment (internal and external) on walls by scrapping with steel wire brushing, scraping down smoke soot/ plants roof from wall/chhajjas and applying two coat of cement based paint on walls including preparation of old plastered or un plastered surface comlete all as speified and directed.
Material and labour for Preparing of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of oil emulsion( any colour as approved by Engineer In Charge) complete all as specified and directed by Engineer -in-Charge.
M&L Complete removal of existing treatment (internal and external suraces) on walls by scrapping with steel wire brush or any other means including two coat of wall care putty on wall and applying two coat of oil emulsion ( any colour as approved by Engineer In Charge) complete all as specified and directed by Engineer -in-Charge.
Complete removal of exiting treatment from external wall preparation of old plastered surface and applying two coat of premium acrylic exterior anti algal fungal emulsion paint over one coat of weather coat exterier primer on wall all as direced by Engr-in-Charge.
Material and labour for prepration old or untreated surfaces of wood or wood based surfaces and applyingone coat of synthetic enamel paint over a prime coat of pink primer on surfaces of any desription, not otherwise described, over 10 cm width or girth complete all as specified and directed by Engineer -in-Charge.
M&L , preparation of wall surface and aplying wall putty 1 mm thick on wall surface finished even and smooth including rubbing complete all as spefied and directed
Material and labour for applying one coat of synthetic enamel paint on steel or iron surfaces of any decription, over 10 cm in width or grith, not othewise described including preparation of surfaces and over a coat of red oxide complete all as specified and directed by Engineer -in-Charge.
Material and labour for prepration old or untreated surfaces of wood or wood based surfaces and applyingtwo coat of synthetic enamel any colour as approved by Engineer In Charge) paint over a prime coat of pink primer on surfaces of any desription, not otherwise described, over 10 cm width or girth complete all as specified and directed by Engineer -in-Charge.
Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.
Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.
Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed.
Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and as directed.
S &F for factory made solid panel PVC door shutter 30mm thick (style) consisting to frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed.
All as per above but above but wire guage panel i.e. panel should be wire guage in lieu of PVC sheet panel. Wire guage shall be wraped on a additional square tube 8mm M.S. solid tube and tube shall be welded to M.S. tube. and wire guage shall be strechted tightly firmed complete all as specified and as directed.
S&F 30mm thick Flush shutters ,soild core construction ,with paticle board core and plywood face panels , commercial type complete all as specified and directed.
S/F Factory made Solid PVC Moulded door shutter ,28 mm to 30 mm thick(stiles) with 2,4,or 6 raised panel design with 2 mm thick moulded Prelam PVC sheet on the front face & 2 mm prelame PVC Sheet on back face complete all as specified and directed..
M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, powder coated aluminium handles 150mm size 2 Nos, 3 Nos powder coated aluminium hinges heavy duty and 02 Nos 150mm long powder coated aluminium tower bolts in each door shutter with powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board etc. shall be measure and paid for separately.
M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track) without sash, aluminium section weighing 0.25 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.
S & F for door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed
S & F of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair complete all as specified and directed
S&F galvanised wire cloth, .48mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed
S&F for aluminium butt hinges of 100mm size complete all as specified
S&F for Mild Steel Butt hinges , medium weight, cold rolled , of size 100 mm complete all as specified .
S&F for Extruded aluminium alloy handle of 150 mm size fabricated type, anodised complete all as specified..
S&F for aluminium anodised barrel tower bolt of 200mm of extruded section complete all as specified.
S&F for aluminium anodised barrel tower bolt of 150mm of extruded section complete all as specified.
S&F for aluminium alloy anodised sliding door bolt of 250mm with haps, staple ( bolt type ) & fixing clips of sheet ,cast or extruted sections and fixing bolts and slinding bolts of extruded sections complete all as specified.
S&F for floor door stopper of brass body and tongue, overall length of cover plate 150 mm , anodized, with hard drawn steel spring , fixed to shutters complete all as specified and as directed.
M&L for applying for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified
M&L for New painted surface of wood and wood based material any description and in any position over 10 cm width or girth and M&L for applying two coat of synthetic enamel paint over one coat pink primer all as specified and directed.
S&F 3mm thick, ordinary glass pin head type and glazing with oil putty,silicone or wooden beads, in square not exceeding 0.5 sqm in each pane including hacking out old broken glass of any thickness and any description from wooden/ steel frame/ stone,concrete or brick surrounds complete all as specified and directed.
S&F in repair galvanised wire cloth, .48mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised staples complete all as specified and directed
Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete.
S&F for 18 mm thick PVC Celuka ply of One side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesive complete all as specified .
S&F for 12 mm thick PVC Celuka ply of One side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesive complete all as specified .
S&F for aluminium anodised barrel tower bolts of extruded section of 100mm size, complete all as specified and directed.
S&F for continuous (piano) hinges mild steel bright finish or electro galvanised width of width of flaps nexc 30 mm (when open), complete all as specified and directed.
S&F for extruded aluminium alloy handle of 100 mm size fabricated type, anodised.complete all as specified .
S&F for Haps and staple safety type Aluminium anodised with MS hinge pin including bbolt to hinge pin of 100 mm size sixed with screw complete all as specified .
S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed.
S&F in repair 5mm thick PVC sheet fillet of width 35mm for wall panelling (At the spacing of 1 feet centre to centre) inclusive of fixing on to wall to make PVC Frame as per secification and drawing comlplete all as specified and directed.
S&F in repair Solid PVC Wall Lining consisting of 5mm thick Plain wood grain printed PVC sheet inclusive of solvent cement and fixing at site on to wall to make PVC Frame as per specification and drawing comlplete all as specified and directed.
S&F for PVC bath room cabinate mirror of Size 500mmx400 mm make Prayag Cat No 556 or equivalent complete all as specified and directed.by Engineer in charge.
S&F for in repair Curtain rod stainless steel decorative type 25 mm dia including fixing bracket and end knobs complete all as specified, complete all as specified and directed.
Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe, complete all as specified and directed.
Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe, complete all as specified and directed.
Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 25mm bore of pipe, complete all as specified and directed.
supply and laying 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed by engineer in charge .
supply and laying 25 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed by engineer in charge .
S & F 15mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling, concealed or fixed to wall or laid in floors complete all as specified and as directed
S & F 20mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling, concealed or fixed to wall or laid in floors complete all as specified and as directed
Desmantaling of PVC / AC rain water / vent / waste pipes, any size including all fittings complete all as specified and directed.
S&F for 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all specified.
S&F for 75/90 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls. complete all as specified .
S&F for 75/90 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified .
S&F for 110mm dia PVC(SWR)pipes bends any radious with acces door, complete all as specified and directed.
S&F for 75 mm dia PVC(SWR)pipes bends any radious.with acces door complete, complete all as specified and directed.
S&F for 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door, complete all as specified and directed.
S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed.
M&L for 75 mm dia of out let PVC (SWR) floor trap plain with CP grating including jointing with solvent cement as in repair complete all specified.
Dismantling water tanks of any description and in any position , of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.
Dismantling water tanks of any description and in any position , of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed.
S&F for rotational moulded poly-ethylene Three layered insulation puff tanks (cylinderical vertical ) 500 litres capacity, white colour hoisted and fixed in position complete all as specified and directed.
S&F for rotational moulded poly-ethylene Three layered insulation puff tanks (cylinderical vertical ) 1000 litres capacity, white colour hoisted and fixed in position complete all as specified and directed.
S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.
S&F for as in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed 20mm dia of pipe . (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.
S&F for in repair gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed.
S&F for in repair gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 25mm bore, complete all as specified and directed.
Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pies etc capacity exc 250 and n.exc 500 ltrs, complete all as specified and directed.
Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pies etc capacity exc 500 and n.exc 1000 ltrs, complete all as specified and directed.
S&F for in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long, complete all as specified and directed.
S&f corner glass shelf 300mm ( with ABS Bracket ) complete all as specified and directed.
S&F for in repairs Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and directed.
S&F for in repair aluminium anodised tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed.
S&F for aluminium peg set of six fixed to wall with PVC plugs and screw, complete all as specified and directed.
M&L for vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor, complete all as specified and directed.
S&F for in repairs of vitreous china wash basin, white, flat back/ oval, size 500 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Pillar tap and PVC connection will be measured paid separetly.
S&F for in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed.
Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm, complete all as specified and directed.
S&F for in repairs vitreous china urinals, Half stall type ,white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.
S&F for as in repair viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts,flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed. .
S&F for in repair Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.
S&F in repairs Wall mounted/ One piece pedestal pattern( white in colour) water closet with seat cover and inbuilt flush tank (Make Prayag model name MIDAS series 4220/ 4320/4420 ) Size (mm) 700 x 370 X 650 or equivelent in other make complete all as specified and directed.
S&F in repair 2 Way Chromium plated angle cock with flange. Complete all as specified and directed
S&F in repair 2 Way Double handle Bib cock with flange. Complete all as specified and directed
S&F for in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plug washer and waste coupling, waste pipe including bedding in CM to dwarf wall or including fixing cantilever brackets and connections to pipe over all size 915mmx460mm built size 410mmx330x160mm, complete all as specified and directed.
S & F in repair for plate rack made out of .90 mm thick stainless steel of wire type / sheet pattern size nad type as directed by Engineer In Charge and approved by GE fixed to wall with necessary fitting arrangement Complete all as specified and directed.
S&F for in repairs15mm,pillar taps of fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified .
S&F for in repairs 15mm angle cock of chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified .
S&F for in repairs for 15mm ,bib tap Fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified.
S&F for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed fixed in repairs, complete all as specified and directed.
S&F for in repairs PVC waste pipe flexible type 32mm bore, complete all as specified and directed.
S&F for in repairs for 15 mm Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions complete all as specified and directed.
S&F for in repairs Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified.
S&F for in repairs Heatth Faucet with one meter PVC flexible body pipe of including fixing bracket, complete all as specified and directed.
S&F in repairs for wall mixer with Three in one pattern in of brass complete all as specified and directed.
S&F in repairs for wall mixer with Two in one pattern in of brass complete all as specified and directed.
Demolition of wall and ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed.
S&Fof E- grid False ceiling 4 mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic size 600mm x 600 mm/ 595 mm x595 mm ) decorative finish fixed with clips and screw including powder coated galvanised MS grid frame work false ceiling of ( Main Tee size 32mmx24mmx0.65mm cross tee 24mmx24mmx0.45mm ) and with slot for fixing including suspended with 2mm dia. GI wire hangers fixed with steel dash through fasteners from purline of the roof complete all as specified and as directed
S&F for in repairs mild steel Chromium plated grating 100 mm dia, fixed in repairs to Nahani traps, complete all as specified and directed.
Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed.
S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as directed by Engineer -in -charge.
S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm double ribbed plain steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding (ridge) to wall fixed with self tapping screws complete all as directed by Engineer -in -charge.
Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.
Dismantling of timber in fillets, rails, posts, rafters, purlins etc under 40 Sq. cm provided for complete all as specified and as directed.
S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 ( Gde E-165) complete all as specified and directed
M&L two coat of synthetic enamel paint over coat of Red oxide primer over Old steel surfaces nexc 10 cm width or girth complete.
M&L for vitrified paver color tiles 30 cmx30cmx9 to 10 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.
Repair and mending of leakage in 15mm bib tap, pillar tap, stop cock, angle stop cock etc of any description includig replacement of internal fitting of requisite pattern and sizecomplete all as specified and directed
Repair and mending of leakage in wall mixer, wash basin mixer and sink mixer etc of any description includig replacement of internal fitting of requisite pattern and size complete all as specified and directed
S&F in repairs small galvanised iron fittings such as socket, elbow, nipple, tee, union etc for 15mm bore pipe complete all as specified and directed
S&F in repairs small galvanised iron fittings such as socket, elbow, nipple, tee, union etc for 20mm bore pipe or 15x20mm reducers complete all as specified and directed
Opening of air lock/ blockage in GI pipe line from service water tank to internal GI pipes/ fittings for smooth flow of water to bib taps/ showers/ pillar tap/ stop valves complete by application of pressure pump/ gravity pressure complete all as specified and directed
Resecuring, easing or adjusting without taking down door/ windows shutters not exceeding 1 Sqm for easy operation, tightning hinges, adjusting position of hinges, tower bolts, sliding bolts etc.including provision of necessary screws.
Resecuring, easing or adjusting without taking down door/ windows shutters exceeding 1 Sqm but not exceeding 2 sqm for easy operation, tightning hinges, adjusting position of hinges, tower bolts, sliding bolts etc.including provision of necessary screws complete all as specified and directed
Resecuring, easing or adjusting without taking down door/ windows shutters exceeding 2 sqm for easy operation, tightning hinges, adjusting position of hinges, tower bolts, sliding bolts etc.including provision of necessary screws complete all as specified and directed
Repair aluminium door and window shutters by taking down shutter from frame, opening out joints, taking out glass or panels of any description, replacing the corner piece wherever required, joining and assembling again, refixing the glass pane and panels by provision of new rubber neoprene packing complete all as specified and directed
Taking down and refixing of shutter of any description Note : Refixing incl taking down easing and adjusting and also refxing builders hardware as reqd incl removal of unserviceable screws etc. Hardware items will be paid at supply only rates except screws and nails Not exceeding 1 Sqm each
All as per item No 148 above Exceeding 1 Sqm n.exc 2 Sqm each complete all as specified and directed
All as per item No 148 above Exceeding 2 Sqm each complete all as specified and directed
Supply only 150 mm long Aluminium anozied barrel tower bolt of extruded section complete all as specified and directed
All as per item No 151 above but 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed
All as per item No 151 above but 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed
All as per item No 151 above but75mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed
All as per item No 151 above but 150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed
All as per item No 151 above but 150mm long aluminium handles, cast type, anodised complete all as specified and directed
All as per item No 151 above but. 30mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed
All as per item No 151 above but. 150mm in length Floor door stopper of aluminium allloy body and tongue, anodised with hard drawn steel spring fixed in floor, complete all as specified and directed
S & F in repairs Mild steel Drawers or almira handles, projections drop (50mm to 65mm) on screwed plate complete all as specified and directed
Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.
Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.
Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.
Taking down unserviceable TPN DB with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.
M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete for the following:-
One light point controlled by one switch.
One Ceiling fan point controlled by one switch.
One Exhaust fan point controlled by one switch.
One 3 pin socket outlet 5 Amps controlled with one switch on the same board.
One 3 pin socket outlet 5 Amp controlled by one switch on independent board.
One bell point controlled by one bell push
Description all as per item No. 05 here in before but point wiring with 2.5 sqmm FRLSH confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire.
S&F switch piano, flush button single pole one way 5 Amp complete all as specified and directed.
S&F Switch socket outlet, 5 Pin, 6 Amp 2 in 1, flush type, universal complete.
S&F switch piano, flush button single pole one way 15 Amp complete all as specified and directed.
S&F socket out let multipurpose flush type, 2 in 1 6 Pin 5/15 amps complete all as specified and directed.
S&F bell push flush type, 5 Amps complete all as specified and directed.
S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed.
S&F Ceiling rose 3 terminal/pvc/polycarbonate, isolated body.
S&F electronic step rotary type fan regulator of two module capacity 80 to 100 Watt, 240 volts, AC 50Hz complete all as specified and directed.
S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete.
S&F LED Lamp 12 watt with 5 star rating complete.
S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.
S&F switch piano, flush button single pole one way 5 Amp complete in repair including taking down old u/s switch all as specified and directed.
S&F Switch socket outlet, 5 Pin, 6 Amp 2 in 1, flush type, universal complete in repair including taking down old u/s socket outlet
S&F switch piano, flush button single pole one way 15 Amp complete in repair including taking down old u/s switch all as specified and directed.
S&F socket out let multipurpose flush type, 2 in 1 6 Pin 5/15 amps complete in repair including taking down old u/s socket outlet all as specified and directed.
S&F bell push flush type, 5 Amps complete in repair including taking down old u/s bell push all as specified and directed.
S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete in repair including taking down old u/s buzzer Ding Dong all as specified and directed.
S&F Ceiling rose 3 terminal/pvc/polycarbonate, isolated body in repair including taking down old u/s ceiling rose all as specified and directed.
S&F electronic step rotary type fan regulator of capacity 80 to 100 Watt, 240 volts, AC 50Hz complete in repair including taking down old u/s fan regulator all as specified and directed.
S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete in repair including taking down old u/s lamp Holder.
S&F LED Lamp 12 watt with 5 Star Rating complete in repair including taking down old u/s LED Bulb
S&F Switch socket combination 2 in 1, 5 A flush type in repair complete including taking down old u/s s/s combination
S&F Switch socket combination 3 pin 16A, flush type in repair complete including taking down old u/s s/s combination
S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal including taking down old u/s s/s combination complete.
Supply & Fix in replacement, of Modular Switch 6 Amp one way including taking down old u/s Modular Switch 6 Amp
Supply& Fix in replacement, of Modular Switch 16 Amp one way including taking down old u/s Modular Switch 16 Amp
Supply & Fix in replacement, of Modular socket 6 Amp 3pin including taking down old u/s Modular socket 6 Amp
Supply & Fix in replacement, of Modular socket 6/16 Amp 3pin complete including taking down old u/s Modular socket 6/16 Amp
Supply & Fix in replacement, of Modular Step fan Regulator of 1/2 Module 120 Watt including taking down old u/s Modular Step fan Regulator
Supply & Fix in replacement, of Modular white colour plate with frame 2 module including taking down old u/s Modular white colour plate with frame 2 module
Supply & Fix in replacement, of Modular white colour plate with frame 3 module including taking down old u/s Modular white colour plate with frame 3 module
Supply & Fix in replacement, of Modular white colour plate with frame 4 module including taking down old u/sModular white colour plate with frame 4 module
Supply & Fix in replacement, of Modular white colour plate with frame 6 module including taking down old u/s Modular white colour plate with frame 6 module
Supply & Fix in replacement, of Modular white colour plate with frame 8/10/12 module including taking down old u/s Modular white colour plate with frame 8/10/12
S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion in repair including taking down old u/s LED Tubelight all as specified and directed.
M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC Casing medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed.
Description all as per item No. 42 here in before but for 2.5 sqmm two single core PVC insulated unsheathed FRLSH wire drawn in and including 20mm dia PVC Casing Caping medium grade including one run single core PVC insulated unsheathed 2.5 Sqmm FRLSH earth continuty wire complete all as specified and directed
S & F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60 mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed.
Supply and fixing of 70 Watt new generation energy saving and environmental friendly long life LED street light in repair made up of pressure dia cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP 66 protection and impact resistance of IK 07 with 10 KV Built-in-SPD including taking down complete.
Taking down unsv ceiling fans 1200/1400 sweep 230v,AC supply,single phase from site,depositing in MES store Yard,dismantling all parts,checing serviceability of all parts & continuity of copper winding(Burn out winding fan should be staking aside for rewinding) including cleaning all the components of fan, oiling ,greesing,including replacement of rusted/unsv nuts,bolts split pin rubber reel,machine screws,shafts,capacitor,clamps etc as requried,reassembling the fan and testing complete all as specified and directed Note :(i)Rewinding of fans should be measure and paid separately under appropriate items of schedule(ii) Major parts like fan capacitor,clamps with rubber real etc measured and paid separately as supply only items (iii) Testing should be done to repaired fan minimum 24 Hrs continues running in MES store yard before fixing at site complete.
Taking out burnt winding wire from ceiling fans(Which req rewinding) Motor of 1200 mm sweep 230V AC supply,single phase,Transporting to contractor workshop for rewinding the same with super enameled copper winding wire of existing gauge/turns & sixe throughly cleaning all the components of fan, oiling,greesing,replacement of rusted/unsv nuts,bolts split pin rubber reel,machine screws,shaft etc as required reassembling the fan,testing complete & Transporting back to MES Yard complete all as specified and directed.Note :(i) Major parts like fan capacitor,clamps with rubber real etc measured and paid separately as supply only items as below (ii) Testing should be done to repair fan minimum 24 Hrs continues running in MES store yard before fixing at site complete.
Taking down unsv Exhaust Fan 230/300/380/450 mm sweep 230v,AC supply,single phase from site,depositing in MES store Yard,dismantling all parts,checing serviceability of all parts & continuity of copper winding(Burn out winding fan should be staking aside for rewinding) including cleaning all the components of fan, oiling ,greesing,including replacement of rusted/unsv nuts,bolts split pin rubber reel,machine screws,shafts,capacitor,clamps etc as requried,reassembling the fan and testing complete all as specified and directed Note :(i)Rewinding of fans should be measure and paid separately under appropriate items of schedule(ii) Major parts like fan capacitor,clamps with rubber real etc measured and paid separately as supply only items (iii) Testing should be done to repaired fan minimum 24 Hrs continues running in MES store yard before fixing at site complete.
Taking out burnt winding wire from Exhaust fans(Which req rewinding) Motor of 230/300/380/450mm sweep 230V AC supply,single phase,Transporting to contractor workshop for rewinding the same with super enameled copper winding wire of existing gauge/turns & sixe throughly cleaning all the components of fan, oiling,greesing,replacement of rusted/unsv nuts,bolts split pin rubber reel,machine screws,shaft etc as required reassembling the fan,testing complete & Transporting back to MES Yard complete all as specified and directed.Note :(i) Major parts like fan capacitor,clamps with rubber real etc measured and paid separately as supply only items as below (ii) Testing should be done to repair fan minimum 24 Hrs continues running in MES store yard before fixing at site complete.
Supply only in replacement of ball bearing(6203&6204) Suitable for Exhaust fan/Air circulator fan of any size complete all as specified and directed.
Supply only in replacement of ball bearing(6201&6202) Suitable for Ceiling fan of any size complete all as specified and directed.
Supply and fix condenser of 2.5 MFD capacity after removing existing unsv condenser from any situation complete all as specified and directed.
Supply and fix condenser of 3.15/ 04 MFD capacity after removing existing unsv condenser from any situation complete all as specified and directed.
M&L for servicing of AC of any capacity including air filter cleaning,condenser and evaporator coil cleaning,insulation of tubing with expanded polythene foam insulation tubing and making necessary connection including M&L for implastiised PVC pipe medium duly 20mm dia for draining out condensed water all as specified and directed.
Dismantling and taking out the existing old unserviceable compressor hermetically/rotary sealed unit of any make from split type AC and S&F New compressor suitable for split AC of capacity 1.5 Ton complete all as specified and directed by Engr-in-chsrge.
Dismantling and taking out the existing old unserviceable compressor hermetically/rotary sealed unit of any make from split type AC and S&F New compressor suitable for split AC of capacity 2 Ton complete all as specified and directed by Engr-in-charge.
S&F PCB Circuit with remote control suitable for any make and capacity of 1.5/2 Ton split type AC.
M&L for replacement of damaged insulation of size 1/4&3/8 for split AC complete as per existing site complete all as specified and directed by Engr-in-charge.
M&L for replacement of damaged insulation of size 1/2&5/8 for split AC complete as per existing site complete all as specified and directed by Engr-in-charge.
M&L for replacement of copper tube of size 3/8 & 5/8 suitable for any type and any capacity Air conditioner complete all as specified and directed by Engr-in-charge.
Refrigerant gas R-22/R-32 for Topping up in Air conditioner size of 1.5/2 Ton.
Refrigerant gas R-410(a) for Topping up in Air conditioner size of 1.5/2 Ton.
S&F sheet metal Enclosure with socket Plug top and earth plug, single pole and neutral with single pole MCB 20 Amps 240 volts in repairs complete including taking down all as specified and directed.
Taking down the water heater storage type of any make upto 50 ltrs capacity.Dismantling carefully from its position fixed on walls,descaling the inner tank,flange assembly by applying descaling solution,reassembling the same,after replacement of defective parts and reinstalling to their original location locations or as directed after commissioning and testing complete,all as direceted by the Engr-in-charge.Note : Any material/part found UNSV during servicing shall be replaced by the contractor and measured and paid separately under respective items.
Taking down the water heater for rectification of leakage in the inner shell of (Geyser)storage type of any make upto 50 ltrs capacity.Dismantling carefully from its position fixed on walls,and rectified leakage by soldering,brazing,welding at appropriate area of coppe/stainless steel inner tank of geyser and reinstalling to their original location or as direceted by the Engr-in-charge.Note : Any material/part found UNSV during servicing shall be replaced by the contractor and measured and paid separately under respective items.
S&F in repair of unsv neon indicating lamp,rectangular/round as required at site including taking down,all as directed by Engr-in-charge
S&F in repair of unsv heating element 2 KW,single phase,230 volt with triangular/round base as suitable including taking down for 35/50 Ltr water heater.
S&F in repair of thermostat switch range upto 80"C suitable for 25 to 50 ltrs cap water heater.
S&F in place of u/s PVC Connection of any make with(ISI Mark) having 10 mm dia,60cm long with steel reinforcement suitable for hot water geyser outlet supply with 02 nos of unions/cup shaped cover with washers all as directed by engr-in-charge.
S&F in place of u/s PVC Connection of any make with(ISI Mark) having 10 mm dia,60cm long with steel reinforcement suitable for cold water geyser outlet supply with 02 nos of unions/cup shaped cover with washers all as directed by engr-in-charge.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type in repair with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lampsuitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.
S&F sheet metal enclosure double door distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 125 Amp,4 pole & Including MCCB 125 amps 4 pole 16 KA complete in repair (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site.
S&F MCB DB, sheet metal enclosures double door TPN 4 way with bus bar 415 volts 2 in 1 shutter type (METAL DOOR) type in repair with blanking plates where required and IP 43 degree protection complete all as specified and directed.
S&F MCB DB, sheet metal enclosures double door SPN 12 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type in repair with blanking plates where required and IP 43 degree protection complete all as specified and directed.
S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type in repair with blanking plates where required and IP 43 degree protection complete all as specified and directed.
S&F, MCB SPN 32Amps to 40 Amps, 240 volts 'C' series 16 KA in repair ,including connection with suitable size copper lugs complete all as specified and directed.
S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series in repair 10 KA including connection with suitable size copper lugs. complete all as specified and directed.
Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 95 Sqmm 3.5 Core.
All as per Item No 238 but 50 Sqmm 3.5 core.
All as per Item No but 35 Sqmm 3.5 core.
All as per Item No but 25 Sqmm 3.5 core.
All as per Item No but 16 Sqmm 2 core.
S&F 4 POLE MCCB 400 Amp, 50Hz ,415V with rupturing capacity 36 KA in repair complete all as specified.
S&F 4 POLE MCCB 250 Amp, 50Hz ,415V with rupturing capacity 36 KA in repair complete all as specified.
S&F 4 POLE MCCB 160 Amp, 50Hz ,415V with rupturing capacity 36 KA in repair complete all as specified.
Taking out old defective burnout motor of capacity of 10 HP, 3 phase, 440 V, 50 Hz from foundation and transfer it to workshop for rewinding with super enamelled copper wire of existing size & gauge and replacement of DE & NDE bearing so as to match the manufacturers original specification and refitting the same, testing and commissioning complete all as specified and directed.
M & L for servicing of DG set of 20KVA including replacement of all consumable parts i.e Engine oil as per the manufacturers recommendation spinion lube oil filter, Fuel filter element primary, fuel filter element secondary, primary element, Coolent premix in and all other essential parts required such as fuel level indicator, lub oil pressure sensor, temperature sensor, overload sensor and all other sensors and gauges with soft touch buttons at site, incl servicing of alternator and lubricating, replacement of unsv leads required for battery, complete checking and replacing (if unsv) any other parts of DG set as and when required or as per direction of Engr-in-Charge. . Note : Necessary servicing will be carried out from authorised rep of Manufacturers.
M & L for servicing of DG set of 30KVA including replacement of all consumable parts i.e Engine oil as per the manufacturers recommendation spinion lube oil filter, Fuel filter element primary, fuel filter element secondary, primary element, Coolent premix and all other essential parts required such as fuel level indicator, lub oil pressure sensor, temperature sensor, overload sensor and all other sensors and gauges with soft touch buttons at site, incl servicing of alternator and lubricating, replacement of unsv leads required for battery, complete checking and replacing (if unsv) any other parts of DG set as and when required or as per direction of Engr-in-Charge. . Note : Necessary servicing will be carried out from authorised rep of Manufacturers.
S&F Battery of 12V with 75 AH for DG set in replacement of old u/s battery.
Supply & fix Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting in repair complete all as specified and directed.
Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.
Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete.
Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete.
Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete.
Repair of Sluice valve size of 80mm/100mm including replacement of gland packing,flunge packing,shaft and thread coller all as specified and directed.
S&F in repairs fully automatic star delta starter suitable for 10 to 20 HP Centrifugal Pump Set Motor 415 volts 50 Hz Panel Mounting complete with contactor and suitable thermal relay all as specified and directed.
Supply and fixing LED flood light 100 watt 230 V AC outdoor type in repair with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.
S & F Photometric sensor outdoor type 220-240 volt ambient light <5-15 lux working temparature -20~+40C working humidity <93% RH along with pvc connection of 6 to 10 amp capacity.
M/S MAHAVIR SINGH
M/s. Varinder Kumar Sharma
M/s Manish Contractor
Akarsha Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .